Astra OTX2400A Bedienungsanleitung
Magnification
Objective Lens Diameter
Close Focus
Eye Relief
Exit Pupil
Field of View
Water-Resistance Rating
Lens Coating
Housing Material
Dimensions
Total Wt. (including battery)
Laser Type
Display Type
Range Response Time
Battery Type
Battery Life
Laser Range (Reflective)
Laser Range (Tree)
Laser Range (Deer)
Horizontal (Angle Corrected) Mode
Angle with Line of Sight Mode
Archery Mode
Gun Mode with Ballistics
Golf Mode
SCAN Mode
Bluetooth®
6X
21 mm
6 yards
16 mm
3.5 mm
31.50 ft. at 100 yds.
IPX4 (Water-Resistant)
Fully Multi Coated with Rain Repellent
Composite with Rubber Armoring
4"x 1.44"x 3.11"
4.25 oz.
905 nm Class 1 Eye-Safe
Red Reflective OLED
0.1 seconds
CR-2 3-volt Lithium
Approximately 10,000 Readings
6-2,400 yds.
6-1,400 yds.
6-950 yds.
Yes
Yes
Yes
Yes (Applied Ballistics Ultralight®)
Yes
Yes
Yes
OTX2400A Laser Rangefinder
Quick Start Guide
Specifications & Features
What’s in the Box?
◆6 Power x 21mm Laser Rangefinder Monocular
◆Soft Premium Carry Case
◆Microfiber Lens Cleaning Cloth
◆Adjustable Neck-style Lanyard
◆Astra Optix™ Decal Sticker
◆CR-2 3-volt Lithium Battery (Battery Pre-Installed)
◆Quick Start Guide
MOA
MIL
TH
Your Rangefinder at a Glance
Red Reflective OLED
Objective
Lens
(21 mm)
Rubber
Grip (Top)
Rubber
Grip
(Bottom)
Mode
Button
Power
(Range)
Button Eyepiece
Diopter
Focus
Battery
Cover
Lanyard
Attachment
Circle Dot
Aiming
Reticle
Holdover
Direction
Arrows
Line of
Sight (LOS)
Value Y = Yards
M = Meters
(Defaults
to Yards)
Degree
Symbol
for Angle
Value.
Ballistic Unit of
Measurement
(Defaults to MOA)
Y = Yards
M = Meters
(Defaults
to Yards)
Horizontal Distance
(Angle Corrected)
Value
Low Battery
Indicator
T = Angle with
LOS Mode
H = Horizontal
Distance (Angle
Corrected) Mode
pp
R
R
R
R
u
u
b
b
b
b
b
b
e
r
G
rip
()
M
o
d
e
B
utton
F
o
c
us
Class 1
(905 nm)
Eye-Safe
Laser Lens
Laser
Receiving
Lens
Bluetooth®
Connection
Symbol
1. Connect the Battery: Open the
Battery Cover and remove the plastic
insert from the top of the battery.
Quick Start
2. Turn on unit and Adjust Eyepiece
Diopter Focus: Press the Power (Range)
Button to turn on the rangefinder Red
Reflective OLED display.
Turn the Eyepiece Diopter Focus until
both the image in the field of view and
Aiming Reticle are clear and focused.
Press the
Power Button Rotate Eyepiece
3. Adjusting the Red OLED Display
Brightness: Hold the Mode Button to
enter the menu setting, Press the
Power Button to cycle between 5
different brightness levels. Press the
Mode Button to select.
Brightness Setting
◆1 = Lowest brightness setting
◆5 = Highest brightness setting
NOTE: For some Astra Optix models,
the display brightness setting is the
last item in the menu. If the
brightness setting is not the first
item in the menu, then press the
Mode Button to advance through all
the menu items until you see the
brightness setting.
Quick Start
4. Measuring Distance: Aim the Aiming
Reticle on the object you want to range
and press the Power Button to display
the distance. Your unit factory default
setting is the Horizontal (Angle
Corrected) Mode.
The Line of Sight (LOS) value is
displayed at the top of the display for
2 seconds.
The angle-corrected Horizontal Distance
( ) value is displayed at the bottom of
the display for up to 8 seconds or until
you take a new measurement.
5. Menu Settings - Button Operation
Summary
c
e
f
l
Press Power
Button to turn
on and to measure
the distance. Hold Power
Button to
SCAN.
Press Power
Button to cycle
between menu
items when in
the menu.
Hold Mode
Button to
enter menu.
Hold Mode
Button to
exit menu.
Press Mode
Button to
confirm
selections in
the menu.
Quick Start
5.4. Sub-Modes under Standard Mode:
Press the Power Button to cycle
between each sub-mode. Press the
Mode Button to select.
5.2. Yards & Meters Selection: In the
menu press the Power (Range) Button
to cycle between Yards (Y) and
Meters (M) . Press the Mode Button to
select.
5.3. Select the Operation Mode:
Press the Power Button to cycle
between Standard Mode (Std), Archery
Mode (ArCH),Golf Mode or Gun Mode.
When the selection you want to use is
blinking, press the Mode Button to
select your preferred mode.
5.1. Menu Settings - Menu Operation
Summary
◆Brightness Setting
-1 thru 5
◆Distance Units Selection
- Y / M
◆Standard Mode (Std)
- Horizontal (Angle Corrected)
with Line of Sight
- Angle with Line of Sight
- OFF (Only Line of Sight)
◆Archery Mode (ArCH)
◆Golf Mode (GOLF)
◆Gun Mode with Ballistics
- abi (Applied Ballistics®Internal)
- abe (Applied Ballistics®External)
- Bullet Drop Units Selection:
MOA OR MIL (Milliradians)
Horizontal
Distance
(Angle
Corrected)
with Line
of Sight
Angle with
Line of Sight
OFF (Only
Line of Sight)
Quick Start
5.5. Gun Mode with Ballistics Selection:
◆Applied Ballistics®Operation Mode:
First select Gun mode. Next, choose
between ABI (Applied Ballistics® Internal
Mode) or ABE (Applied Ballistics®
External Mode).
Use ABI mode to calculate and display
your ballistics solutions using your
rangefinder’s internal Applied Ballistics
Ultralight® solver.
Use ABE mode if you are using an
external Applied Ballistics® equipped
Kestrel® Weather Meter or Garmin®
Watch (not included) to provide the
ballistics solutions to your rangefinder.
Press the Power Button to cycle through
these selections and press the Mode
Button to select.
◆Holdover Units Selection: MOA or
MIL - Press the Power Button to cycle
through these selections and press the
Mode Button to select.
Quick Start
5.6. How to set up your rangefinder with the Applied Ballistics® Phone App:
◆Download the App:
Download the App from
the Apple App Store or
Google Play (if Android
device). Search for the
“AB Synapse - SORD”
App in the App store as
shown below.
Next download the App
and install the App.
Open the “SORD” App
on your phone.
◆Pair the Rangefinder
Device with the App:
The Applied Ballistics®
start-up screen will
appear. Press the power
button to turn on your
rangefinder, and press
PAIR DEVICE.
NOTE: Turn on your
phone’s Bluetooth in
your iOS or Android
phone Settings menu
if it is not turned on.
◆Pair the Rangefinder
Device with the App:
The device name in this
example: OTX2400A-0001
will appear just below
“Select Device.” Press on
the device name, and it will
display a message:
“Connecting to
OTX2400A-0001.”
Quick Start
5.6. How to set up your rangefinder with the Applied Ballistics® Phone App:
◆Pair the Rangefinder
Device with the App:
Look in your rangefinder
at the same time as it is
connecting. A 2-digit
pin code will appear.
Enter the pin number in
the space as shown.
Note: After 6 seconds,
the Pin number will
dissapear. Press on the
device name again to
display the pin number
in the rangefinder.
◆Setting up in the App -
Set up your 5 most often
used load profiles:
Click the edit icon
to set up up to 5 different
load profiles.
◆Setting up in the App -
Choose your 5 most often
used load profiles:
Choose the “Bullet
Library” to locate your
ammunition and/or you
can manually enter your
bullet’s ballistics infor-
mation directly into the
App.
Quick Start
5.6. How to set up your rangefinder with the Applied Ballistics® Phone App:
◆Setting up in the App -
Choose your 5 most often
used load profiles:
Select the Caliber.
◆Setting up in the App -
Choose your 5 most often
used load profiles:
Select the
Manufacturer.
◆Setting up in the App -
Choose your 5 most often
used load profiles:
Select the Bullet.
Inhaltsverzeichnis
Andere Astra Messgerät Handbücher
