Asus PM5003 Bedienungsanleitung

Motherboard

A8N-E

iiii

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)

the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OFANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALLASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE

OR DATA, INTERRUPTION OF BUSINESSAND THE LIKE), EVEN IF ASUS HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUALARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE ATANY TIME

WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.

ASUSASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR

INACCURACIES THAT MAYAPPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

E2500E2500

E2500

V2V2

March 2006March 2006

March 2006

iiiiii

iii

Contents

Notices ................................................................................................ vi

Safety information ............................................................................. vii

About this guide ............................................................................... viii

How this guide is organized .................................................. viii

Where to find more information ............................................ viii

Conventions used in this guide ............................................... ix

Typography ......................................................................................... ix

A8N-E specifications summary ............................................................ x

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.1 Special features .................................................................... 1-2

1.1.1 Product highlights ................................................... 1-2

1.1.2 Innovative ASUS features ....................................... 1-4

1.2 Before you proceed .............................................................. 1-5

1.3 Motherboard overview .......................................................... 1-6

1.3.1 Placement direction ................................................ 1-6

1.3.2 Screw holes ............................................................ 1-6

1.3.3 Motherboard layout ................................................ 1-7

1.4 Central Processing Unit (CPU) .............................................. 1-8

1.4.1 Overview ................................................................. 1-8

1.4.2 Installling the CPU ................................................... 1-8

1.4.3 Installing the heatsink and fan .............................. 1-10

1.5 System memory ................................................................. 1-13

1.5.1 Overview ............................................................... 1-13

1.5.2 Memory Configurations ......................................... 1-13

1.5.3 Installing a DIMM ................................................... 1-15

1.5.4 Removing a DIMM ................................................. 1-15

1.6 Expansion slots ................................................................... 1-16

1.6.1 Installing an expansion card .................................. 1-16

1.6.2 Configuring an expansion card .............................. 1-16

1.6.3 Interrupt assignments .......................................... 1-17

1.6.4 PCI slots ................................................................ 1-17

1.6.5 PCI Express x16 slot ............................................. 1-18

1.6.6 PCI Express x1 slot ............................................... 1-18

iviv

Contents

1.7 Jumpers .............................................................................. 1-18

1.8 Connectors ......................................................................... 1-20

1.8.1 Rear panel connectors .......................................... 1-20

1.8.2 Internal connectors ............................................... 1-22

Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setup

2.1 Managing and updating your BIOS ........................................ 2-2

2.1.1 Creating a bootable floppy disk .............................. 2-2

2.1.2 Updating the BIOS .................................................. 2-3

2.1.3 Saving the current BIOS file .................................... 2-5

2.1.4 ASUS EZ Flash utility .............................................. 2-6

2.2 BIOS setup program ............................................................. 2-7

2.2.1 BIOS menu screen ................................................... 2-8

2.2.2 Menu bar ................................................................. 2-8

2.2.3 Legend bar ............................................................. 2-9

2.2.4 Menu items ............................................................. 2-9

2.2.5 Sub-menu items ..................................................... 2-9

2.2.6 Configuration fields ................................................ 2-9

2.2.7 Pop-up window ..................................................... 2-10

2.2.8 General help .......................................................... 2-10

2.3 Main menu .......................................................................... 2-11

2.3.1 System Time ......................................................... 2-11

2.3.2 System Date ......................................................... 2-11

2.3.3 Language .............................................................. 2-11

2.3.4 Legacy Diskette A ................................................ 2-11

2.3.5 Primary and Secondary IDE Master/Slave ............. 2-12

2.3.6 First, Second, Third, Fourth SATA Master ............ 2-14

2.3.7 HDD SMART Monitoring ........................................ 2-15

2.3.8 Installed Memory .................................................. 2-15

2.4 Advanced menu .................................................................. 2-16

2.4.1 CPU Configuration ................................................. 2-16

Contents

2.4.2 PCIPnP ................................................................... 2-19

2.4.3 Onboard Devices Configuration ............................ 2-20

2.5 Power menu ........................................................................ 2-24

2.5.1 ACPI Suspend Type ............................................... 2-24

2.5.2 ACPI APIC Support ................................................ 2-24

2.5.3 APM Configuration ................................................ 2-25

2.5.4 Hardware Monitor ................................................. 2-27

2.6 Boot menu .......................................................................... 2-28

2.6.1 Boot Device Priority .............................................. 2-28

2.6.2 Removable Drives ................................................. 2-29

2.6.3 Hard Disk Drives ................................................... 2-29

2.6.4 CDROM Drives ....................................................... 2-29

2.6.5 Boot Settings Configuration ................................. 2-30

2.6.6 Security ................................................................ 2-31

2.7 Exit menu ........................................................................... 2-33

vivi

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications StatementCanadian Department of Communications Statement

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with CanadianThis class B digital apparatus complies with Canadian

This class B digital apparatus complies with Canadian

ICES-003.ICES-003.

ICES-003.

The use of shielded cables for connection of the monitor to the graphics

card is required to assure compliance with FCC regulations. Changes or

modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

viivii

vii

Safety information

Electrical safetyElectrical safety

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are

connected. If possible, disconnect all power cables from the existing

system before you add a device.

•

Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you are

using, contact your local power company.

•

If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safetyOperation safety

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read

all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

viiiviii

viii

About this guide

This user guide contains the information you need when installing and

configuring the motherboard.

How this guide is organizedHow this guide is organized

How this guide is organized

This manual contains the following parts:

••

•Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technology it supports. It also lists the hardware setup procedures

that you have to perform when installing system components. It

includes description of the jumpers and connectors on the

motherboard.

••

•Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setup

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are also

provided.

Where to find more informationWhere to find more information

Where to find more information

Refer to the following sources for additional information and for product

and software updates.

1.1.

1. WebsitesWebsites

WebsitesWebsites

Websites

Visit the TARGA

website (www.targa-online.com) to download the

latest BIOS for this motherboard. Use ONLY the TARGA

OEM BIOS

when updating the motherboard BIOS. Other BIOS updates may

corrupt the BIOS ROM.

2.2.

2. Optional documentationOptional documentation

Optional documentationOptional documentation

Optional documentation

Your product package may include optional documentation, such as

warranty flyers, that may have been added by your dealer. These

documents are not part of the standard package.

ixix

Conventions used in this guideConventions used in this guide

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the

following symbols used throughout this manual.

Typography

DANGER/WARNING:DANGER/WARNING:

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION:CAUTION:

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE:NOTE:

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT:IMPORTANT:

IMPORTANT: Instructions that you MUST follow to complete a

task.

Bold textBold text

Bold text Indicates a menu or an item to select

Italics

Used to emphasize a word or a phrase

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key

Example: <Enter> means that you must press the Enter or

Return key

<Key1+Key2+Key3> If you must press two or more keys simultaneously, the

key names are linked with a plus sign (+)

Example: <Ctrl+Alt+D>

Command Means that you must type the command exactly as shown,

then supply the required item or value enclosed in

brackets

Example: At the DOS prompt, type the command line:

awdflash A8NE.ROM

A8N-E specifications summary

(continued on the next page)

CPUCPU

CPU

ChipsetChipset

Chipset

MemoryMemory

Memory

Expansion slotsExpansion slots

Expansion slots

StorageStorage

Storage

Special featuresSpecial features

Special features

Socket 939 for AMD Athlon™ 64FX/AMD Athlon™ 64

processor

Supports AMD 64 architecture that enables simultaneous

32-bit and 64-bit architecture

Supports AMD

Cool ‘n’ Quiet! Technology

NVIDIA

nForce™ 4 standard

Dual-channel memory architecture

4 x 184-pin DIMM sockets support non-ECC

unbufferred 400/333 MHz DDR memory modules

Supports up to 4 GB system memory

1 x PCI Express x16 slots

2 x PCI Express x1 slots

1 x PCI Express x4 slot

3 x PCI slots

NVIDIA

nForce™ 4 standard chipset supports:

- 2 x Ultra DMA 133/100/66/33

- 4 x Serial ATA 1.5Gb/s drives

- RAID 0, RAID 1, RAID 1+0

ASUS Q-Fan

ASUS Multi-language BIOS

1 x Floppy disk drive connector

2 x IDE connectors

4 x Serial ATA connectors

1 x CPU fan connector

1 x Power fan connector

2 x Chassis fan connector

1 x Serial port connector (COM port)

1 x 24-pin ATX power connector

1 x 4-pin ATX 12 V power connector

3 x USB 2.0 connectors for 6 additional USB 2.0 ports

1 x Internal audio connectors (CD\AUX)

1 x GAME/MIDI connector

1 x Chassis intrusion connector

1 x Front panel audio connector

Intel panel connector

1 x IEEE 1394a connector (Optional)

InternalInternal

Internal

connectorsconnectors

connectors

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Asus Hauptplatine Handbücher

Asus

Asus PRIME H610M-D Bedienungsanleitung

Asus

Asus P7H55-M BR Bedienungsanleitung

Asus

Asus M4N98TD EVO Bedienungsanleitung

Asus

Asus TUF GAMING B550-PLUS Bedienungsanleitung

Asus

Asus P8H61-I LX R2.0 RM SI Bedienungsanleitung

Asus

Asus M5A97 EVO Bedienungsanleitung

Asus

Asus F1A55-M LX3 PLUS R2.0 Bedienungsanleitung

Asus

Asus DN-300-R2 Bedienungsanleitung

Asus

Asus 90MB1000-M0EAY0 Bedienungsanleitung

Asus

Asus A68HM Series Bedienungsanleitung

Asus

Asus TUF GAMING B460-PLUS Bedienungsanleitung

Asus

Asus H81M-C Bedienungsanleitung

Asus

Asus A7V333 Bedienungsanleitung

Asus

Asus B150M Pro Gaming Bedienungsanleitung

Asus

Asus F1A75-M PRO R2.0 Bedienungsanleitung

Asus

Asus MEZ-M Bedienungsanleitung

Asus

Asus Maximus VII Hero Bedienungsanleitung

Asus

Asus PRIME Z690-P WIFI D4 Bedienungsanleitung

Asus

Asus EX-B760M-V5 Bedienungsanleitung

Asus

Asus P3C2000 Bedienungsanleitung

Asus

Asus A7V266-E AA Bedienungsanleitung

Asus

Asus ROG STRIX X570-E GAMING Bedienungsanleitung

Asus

Asus B150I Pro Gaming/Aura Series Bedienungsanleitung

Asus

Asus P5E WS PROFESSIONAL Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Epson

Epson S5U13700P00C000 Bedienungsanleitung

Gigabyte

Gigabyte GA-K8N Ultra-SLI Bedienungsanleitung

Albatron

Albatron PX925XE Series Bedienungsanleitung