AT&T 1080 Bedienungsanleitung

Telephone operation

Call transfer

Transfer a call and speak to the receiving party

While on a call:

1. Press [INTERCOM]. The outside call will

automatically be put on hold, and you will see

INTERCOM TO XX, with XX being the destination

extension number.

2. Press the one-touch button for the extension to

which you’re transferring the call.

-OR-

Dial the extension number to which you’re

transferring the call. You will see the extension

number in the third line of the display.

3. When the other party answers by pressing

[INTERCOM],you can announce the call.

4. Press [TRANSFER].

5. Hang up.

NOTE: If you do not dial an extension num-

ber within 10 seconds, the transfer is automati-

cally canceled. The call is still on hold. Press the

corresponding LINE key to resume the call.

Answer a transferred call

When you hear a long transfer ring, pick up the

handset or press the [LINE] button of the call to

use the speakerphone or headset.

10:01AM 11/23

00:30

10:01AM 11/23

EXT 11

INTERCOM TO

PAGE

10:01AM 11/23

EXT 11

INTERCOM TO 12

10:01AM 11/23

EXT 11

TRANSFER LINE #1

TO 12

10:01AM 11/23

EXT 12

TRANSFER FROM 11

Intercom operation

Intercom overview

This 1080 telephone is fully compatible with any AT&T Four-Line Small

Business System Speakerphone 1070 or 1040 phones you may have installed.

You can use a total of 16 1080/1070/1040 phones together as extensions in

your phone system.

Each individual phone in your telephone system MUST be assigned a unique

extension number for the intercom feature to work. See EXTENSION NUMBER

on page 32 of the installation guide for instructions.

This intercom features both a single-phone page and a system-wide page

(PAGE ALL).

A single-phone page alerts only one phone. A system-wide page (PAGE ALL)

alerts all system phones. Any phone with the Do Not Disturb (DND) feature

activated will not receive a page.

An intercom call rings at the destination extension with a repeating double-ring

pattern.

A single-phone page automatically activates the speakerphone on the receiving

phone. You can deactivate the speakerphone by lifting the handset.

NOTE:

1. If a line is in use, pressing [INTERCOM] will place the line on hold and

activate the intercom (page 26).

2. If you subscribe to DSL service, please read DSL users beginning on page 6

of installation guide for information about minimizing problems with this phone

caused by DSL signals.

Lets any two extensions connected to line 1 ring

each other (page 26).

Operation:

Basic intercom operations

Function:

INTERCOM

Lets you announce over the speaker of the desti-

nation phone (page 29).

PAGE

Lets you announce to all phones in the system at

the same time (system-wide page) (page 31).

PAGE ALL

Lets you connect an intercom call with an

outside line (page 33).

CONFERENCE

Intercom operation

Intercom

Use this feature for calls between system phones.

Make an intercom call with the handset

1. If One-touch preference is set to INTERCOM

(page 35), skip to step 2.

-OR-

If One-touch preference is set to TELEPHONE

(page 30 of the installation guide), press

[INTERCOM].

2. Press the one-touch button for the destination

party, then lift the handset. The screen will diplay

INTERCOM TO XX,with XX being the destination

extension.

If the extension you called is idle or set to Do

Not Disturb, you will hear long beeps. If the other

extension is on a call, you will hear a busy signal.

NOTE: The intercom call is automatically can-

celed if you do not press a one-touch button with-

in 10 seconds.

10:01AM 11/23

EXT 11

INTERCOM TO

PAGE

10:01AM 11/23

EXT 11

INTERCOM TO 12

Intercom operation

Intercom

Make an intercom call with the speakerphone or

headset

With the handset in the telephone base:

1. If One-touch preference is set to INTERCOM, skip

to step 2.

-OR-

If One-touch preference is set to TELEPHONE,

press [INTERCOM]. The phone will

automatically activate the intercom call in

the mode (headset or speakerphone) you

programmed (see AUTOMATIC MODE on page

39 of the installation guide).

2. Press the one-touch button. The screen will

display INTERCOM TO XX, with XX being the

destination extension.

If the destination extension is idle or set to Do

Not Disturb, you will hear long beeps. If the other

extension is busy, you will hear a busy signal.

NOTE: The intercom call is automatically can-

celed if you do not press a one-touch button with-

in 10 seconds.

10:01AM 11/23

EXT 11

INTERCOM TO

PAGE

10:01AM 11/23

EXT 11

INTERCOM TO 12

Intercom operation

Intercom

Answer an intercom call

When you receive an intercom call, you will hear a

repeating double-ring pattern and your screen will

display INTERCOM FROM with the extension number

of the caller. Answer the intercom call by lifting the

handset, or by pressing [INTERCOM], [SPEAKER]

or [HEADSET] to take the call hands-free.

NOTE: If you press [INTERCOM] to answer the

call, the phone will automatically use the mode

(speakerphone or headset) you programmed as the

automatic mode (see AUTOMATIC MODE on page

39 of the installation guide).

End an intercom or page call

To end the intercom or page call, press [INTERCOM].

-OR-

Hang up or press [SPEAKER] or [HEADSET]

again.

10:01AM 11/23

EXT 12

INTERCOM FROM 11

Intercom operation

Voice page

Page a specific extension (single-phone page)

Sends your voice to the speaker of the destination

phone. The person you’ve called may be able to

respond just by talking. See AUTO MUTE on page 35

of the installation guide.

1. Press [INTERCOM].

2. Press [ENTER] to select PAGE.

3. Enter the destination extension number (11-26).

4. Your telephone will display PAGE and the called

extension number. Now the speakerphone on the

destination telephone is activated automatically.

To end the page:

• Press [INTERCOM] on either telephone.

NOTES:

•Refer to page 32 of the installation guide to get

more information on extension numbers.

•Pressing [INTERCOM] while on an external call

will initiate a call transfer (page 23).

•If the destination telephone is in the Do Not

Disturb mode, on an intercom call or on an

outside call, your telephone will sound a busy

signal.

• The auto-mute feature may be set to ON on the

destination telephone to protect privacy (page

35 of the installation guide). The person at the

destination extension will have to press [MUTE] to

re-activate the microphone (page 19).

10:01AM 11/23

EXT 11

PAGING

INTERCOM

10:01AM 11/23

EXT 11

PAGE 12

10:01AM 11/23

EXT 11

INTERCOM TO

PAGE

Intercom operation

Voice page

Answer a single-phone page

Auto-mute off

When your extension receives a page, the phone

beeps and the speakerphone is automatically

activated. Answer the call simply by speaking.

If you are on the headset, you can answer the

page by pressing [HEADSET] and speaking

through the microphone of the headset.

Auto-mute on

The [MUTE] light will be on. Lift the handset or

press [MUTE] to temporarily de-activate auto-

mute and answer the page.

10:01AM 11/23

EXT 12

PAGE FROM 11

Intercom operation

Voice page

Page all (system-wide page)

Sends your voice to the speakers of all phones in

the system.

1. Press [INTERCOM] then [ ] to show PAGE ALL.

2. Press [ENTER]. The screen will display PAGE ALL.

Once the page is automatically answered, speak

and your voice will be heard at all idle extensions

in your phone system.

Page-all shortcut

1. Press [INTERCOM], then press [#].

2. Your telephone will display PAGE ALL. You will be

heard at all idle extensions.

NOTES:

• Pressing [INTERCOM] while on an external call

will initiate a call transfer (page 23).

• If a system telephone is in the Do Not Disturb

(DND) mode, on an external or intercom call,

the system-wide page will not be heard there.

• During a page all, the people at all extensions will

be able to hear you, but you are not able to hear

them.

• During a page all, if [ENTER] is pressed on any

system telephone, the system-wide page will be

terminated and the person on that telephone will

join the intercom call with you.

To end the page all:

• Press [INTERCOM] on your telephone.

10:01AM 11/23

EXT 11

INTERCOM TO

PAGE ALL

. . .

10:01AM 11/23

EXT 11

PAGE ALL

Intercom operation

Voice page

Answer a system-wide page

NOTE: Only one extension can answer a system-

wide page.

When you receive a system-wide page, your

phone beeps and the screen shows PAGE ALL

FROM XX, with XX being the originating extension

number.

1. Press [ENTER] to answer the page. The screen

displays INTERCOM FROM XX, where XX is the

calling extension number.

2. Press [INTERCOM] to end the call on either

telephone.

10:01AM 11/23

EXT 12

PAGE ALL FROM 11

[ENTER]: ANSWER

10:01AM 11/23

EXT 12

INTERCOM FROM 11

Intercom operation

Voice page

Room monitor

Make a single-page call to a system phone to

monitor the sounds from that room. To use the room

monitor feature, the destination telephone auto-

mute feature must be turned off (page 35 of the

installation guide).

1. Press [INTERCOM].

2. Press [ENTER] to select PAGE.

3. Enter the destination extension number (11-26).

4. After your telephone displays PAGE XX, press

[MUTE]. The destination telephone will beep,

then activate its speakerphone automatically.

Now, you can monitor the room of the

destination telephone without being heard.

To end room monitoring, press [INTERCOM] on

your telephone.

Make an intercom conference call

Someone at a system phone having a two-

way conversation on an outside line can invite

someone at an extension to join the conversation.

Follow the directions under Conference calls

on page 22, making sure to establish the non-

intercom call first.

NOTE: You cannot put an intercom conferenceYou cannot put an intercom conference

call on hold.

10:01AM 11/23

EXT 11

PAGING

INTERCOM

10:01AM 11/23

EXT 11

PAGE 12

Andere Handbücher für 1080

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T Synapse SB67020 Bedienungsanleitung

AT&T

AT&T 1080 Bedienungsanleitung

AT&T

AT&T MLS-Series Referenzhandbuch

AT&T

AT&T SL82118 Bedienungsanleitung

AT&T

AT&T 500E Bedienungsanleitung

AT&T

AT&T Merlin Legend 10BS Bedienungsanleitung

AT&T

AT&T Synapse SB67035 Bedienungsanleitung

AT&T

AT&T Trimline 260 Bedienungsanleitung

AT&T

AT&T CL4939 Bedienungsanleitung

AT&T

AT&T E2912B Bedienungsanleitung

AT&T

AT&T CL4940 Bedienungsanleitung

AT&T

AT&T TL72108 Bedienungsanleitung

AT&T

AT&T Trimline TR1909B Bedienungsanleitung

AT&T

AT&T CL2909 Bedienungsanleitung

AT&T

AT&T MERLIN Plus Stücklistenhandbuch

AT&T

AT&T HS-8270 Bedienungsanleitung

AT&T

AT&T 925 Bedienungsanleitung

AT&T

AT&T Merlin II Release 3 Bedienungsanleitung

AT&T

AT&T 2355 Bedienungsanleitung

AT&T

AT&T SynJ SB67118 Bedienungsanleitung

AT&T

AT&T ML17939 Bedienungsanleitung

AT&T

AT&T CL2909 Bedienungsanleitung

AT&T

AT&T 927 Bedienungsanleitung

AT&T

AT&T Call-a-matlc 2671B1M Gebrauchsanweisung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Axess Telecom

Axess Telecom ACW-1xP800 Bedienungsanleitung