AT&T 929 Bedienungsanleitung

User’s manual

Part 2

Big button telephone 929

AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a

AT&T Intellectual Property licensed to Advanced American Telephones. Printed in China.

Congratulations

on your purchase

of this AT&T product.

Before using this AT&T product, please

read the Important product information (Part 1).

Please thoroughly read this user’s

manual for all the feature operations

and troubleshooting information necessary

to install and operate your new

AT&T product. You can also visit our

website at www.telephones.att.com or call

1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

Model #: 929

Serial #:

Purchase date:

Place of purchase:

Both the model and serial number of your AT&T product can be

found on the bottom of the telephone base.

Save your sales receipt and original packaging in case it is necessary

to return your telephone for warranty service.

Before you begin

Parts checklist..........................2

Installation

Table/desk installation ........3

Wall installation ......................5

Telephone operation

Make a call.................................8

Answer a call............................8

End a call....................................8

Ringing indicator.....................8

Speakerphone........................... 8

Mute ..............................................8

Redial............................................9

Erase a redial............................9

Flash.............................................. 9

Temporary tone dialing .......9

Handset volume ................... 10

Ringer volume....................... 10

Speakerphone volume ...... 10

Audio assistTM ...................... 10

Telephone memory

Directory card........................ 11

Store a number in

memory ................................. 11

Store a pause in a

memory number ............... 12

Dial a number in a

one-touch memory.......... 12

Dial a number in a

two-touch memory.......... 12

Erase a memory

number .................................. 12

Appendix

General product care..........13

Troubleshooting.................... 14

Technical specifications.... 16

Index .......................................... 17

Table of contents

Parts checklist

Your telephone contains the following items. Save your sales

receipt and original packaging in the event warranty service is

necessary.

User's manual

Before you begin

Telephone line cord

Handset coiled cord

Mounting bracket

Handset

Telephone base unit

User’s manual

Part 2

Installation

Table/desk installation

Install the desk/table bracket to the upper portion on the

telephone base. Plug the tabs on the bracket into the slots on

the telephone base until they click into place.

Install batteries to provide power for the AUDIO ASSIST,

MUTE and lights. Press the battery cover tabs and remove

the cover. Install three new alkaline AA batteries (not

included). Make sure to follow the polarity guide in the battery

compartment. Replace the cover.

Installation

NOTE: The batteries are needed for the AUDIO ASSIST, MUTE and

lights to work. Replace the batteries when the light is dim or unlit in

a dark room. Replace the batteries only with three new alkaline AA

batteries.

Set the tone/pulse switch. If you have touch tone service, set

the switch to TT (tone). If you have dial pulse (rotary) service,

set the switch to DP (pulse).

Connect the handset to the telephone. Plug the handset coiled

cord into the handset jack on the left side of the telephone

base. Plug the other end of the handset coiled cord into the

handset, then hang up.

Connect the telephone line cord to the telephone. Plug the

telephone line cord into the jack labeled LINE IN on the

telephone base as shown below. If you subscribe to high-

speed internet service (Digital Subscriber Line - DSL) through

your telephone line, you must have a DSL filter between

the telephone base and the telephone wall jack. The filter

will prevent noise and caller ID problems caused by DSL

interference. Please contact your DSL service provider for more

information about DSL filters.

Check for a dial tone. Lift the handset or press to listen for a

dial tone. If you cannot hear a dial tone, slide HS VOL (handset

volume) or SPK VOL (speakerphone volume) upward. If you still

do not hear a dial tone, see the Troubleshooting section on

page 14 of this user's manual.

Installation

Telephone wall jack

DSL filter (not included)

required if you have DSL

high-speed internet service.

Tone/pulse switch

Telephone line cord

Wall installation

Install the wall bracket to the lower portion on the bottom of

the telephone base. Plug the tabs on the bracket into the slots

on the telephone base until they click into place.

Install batteries to provide power for the AUDIO ASSIST,

MUTE and lights. Press the battery cover tabs and remove

the cover. Install three new alkaline AA batteries (not

included). Make sure to follow the polarity guide in the battery

compartment. Replace the cover.

Installation

NOTE: The batteries are needed for the AUDIO ASSIST, MUTE and

lights to work. Replace the batteries when the light is dim or unlit in

a dark room. Replace the batteries only with three new alkaline AA

batteries.

Installation

Set the tone/pulse switch. If you have touch tone service, set

the switch to TT (tone). If you have dial pulse (rotary) service,

set the switch to DP (pulse).

Connect the telephone line cord to the telephone. Plug the

telephone line cord into the jack labeled LINE IN and route it

into the groove on the telephone base as shown below. If you

subscribe to high-speed internet service (Digital Subscriber

Line - DSL) through your telephone line, you must have a DSL

filter between the telephone base and the telephone wall jack.

The filter will prevent noise and caller ID problems caused by

DSL interference. Please contact your DSL service provider for

more information about DSL filters.

Telephone wall jack

Telephone line cord

DSL filter (not included)

required if you have DSL

high-speed internet service.

Reverse the handset tab. This tab holds the handset when you

hang up. Hold down the switchhook and slide the tab up and

out of its slot. Turn the tab so that the end with the hook is

up. Then hold down the switchhook while you insert the tab

back into its slot.

Connect the handset to the telephone. Plug the handset coiled

cord into the handset jack on the left side of the telephone

base. Plug the other end of the handset coiled cord into the

handset, then hang up.

Connect the telephone line cord to a telephone wall jack and

mount the telephone on the wall jack as shown below.

Make sure the cord snaps firmly into place. Place the telephone on

the wall jack mounting studs and pull down until it is held securely.

Check for a dial tone. Lift the handset or press to listen for

a dial tone. If you cannot hear a dial, slide HS VOL (handset

volume) or SPK VOL (speakerphone volume) upward. If you

still do not hear a dial tone, see the Troubleshooting section

on page 14 of this user's manual.

Installation

Switchhook

Handset tab

Telephone operation

Make a call

Lift the handset or press .

When you hear a dial tone, dial the

number you wish to call using the

dial pad or memory buttons.

Answer a call

When the telephone rings and the

ringing indicator flashes, lift up the

handset or press to answer the

incoming call.

End a call

Replace the handset in the cradle on

the telephone base or press while in

speakerphone mode.

Ringing indicator

The ringing indicator flashes when

there is an incoming call.

Speakerphone

During a call, press repeatedly to

alternate between speakerphone and

normal handset use.

Mute

Press MUTE on the telephone base

to silence the microphone during a

conversation. You can still hear the

caller but the caller cannot hear

you. Press MUTE again to resume

the conversation.

Telephone operation

Andere Handbücher für 929

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T Trimline TR1909 Bedienungsanleitung

AT&T

AT&T CL83101 Bedienungsanleitung

AT&T

AT&T Trimline TR1909B Bedienungsanleitung

AT&T

AT&T TL86109 Bedienungsanleitung

AT&T

AT&T 906 Bedienungsanleitung

AT&T

AT&T Trimline TR1909 Bedienungsanleitung

AT&T

AT&T SynJ SB67148 Bedienungsanleitung

AT&T

AT&T 830 Bedienungsanleitung

AT&T

AT&T SynJ SB67118 Bedienungsanleitung

AT&T

AT&T 1070 Bedienungsanleitung

AT&T

AT&T SPIRIT 2448 Expansion Unit Stücklistenhandbuch

AT&T

AT&T E5865 Bedienungsanleitung

AT&T

AT&T CL80107 Bedienungsanleitung

AT&T

AT&T 950 Bedienungsanleitung

AT&T

AT&T SB67108 - AT&T Bedienungsanleitung

AT&T

AT&T CareLine SN1197 Bedienungsanleitung

AT&T

AT&T CL83203 Bedienungsanleitung

AT&T

AT&T SynJ SB67158 Bedienungsanleitung

AT&T

AT&T CL2909 Bedienungsanleitung

AT&T

AT&T ML17939 Bedienungsanleitung

AT&T

AT&T TL96371 Bedienungsanleitung

AT&T

AT&T CL82143 Bedienungsanleitung

AT&T

AT&T MLS-Series Bedienungsanleitung

AT&T

AT&T 993 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Axess Telecom

Axess Telecom ACW-1xP800 Bedienungsanleitung