AT&T CL2939 Bedienungsanleitung

Quick start guide

CL2939

Big button big display

telephone/speakerphone

with caller ID/call waiting

This quick start guide provides basic instructions. For additional installation

options and complete instructions that enable you to use all features of this

telephone, refer to your AT&T CL2939 big button big display telephone user’s

manual.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Battery installation (purchased separately)

Grasp and squeeze as the arrows

indicate to open the hinged bracket.

Before using the telephone, you should install four good AA alkaline batteries

(not included) to provide memory backup and enable the use of some

features. The four AA batteries are required for the following features to work:

speakerphone, mute, flash, caller ID features, display, menu, directory, redial,

clock, audio assist and the IN USE light.

If you unplug the telephone from the wall jack, or your telephone service is

interrupted, and good batteries are not installed, the following information

is lost: call history, numbers stored the directory, redial, and all settings in

the feature menu. We recommend that you initially install new batteries and

change the batteries soon after the low battery icon appears.

CAUTION: Always unplug the telephone line cord before installing

new batteries.

Press the battery compartment

tabs as shown below. Lift to open

the battery compartment cover.

Follow the polarity guide markings

in the battery compartment

to insert four new alkaline AA

batteries (purchased separately).

3. Replace the battery compartment

cover. Make sure the cover snaps

into place.

Battery installation (purchased separately)

If no batteries are installed or the batteries fail, you can make or answer calls

using only the handset. Redial information is held only briefly.

NOTES:

Use disposable alkaline AA batteries only. Do not use rechargeable batteries.

If you do not use the telephone for a long time, disconnect and remove the

batteries from the telephone to prevent possible leakage.

Always unplug the telephone line cord before installing new batteries.

After you replace the batteries with new ones, the clock in the telephone

resets. Manually set the clock again.

If there are no batteries installed and the telephone is plugged into a

telephone wall jack, when you lift the handset the screen display works

using the power from the telephone line. For more details about the line

power, contact your telephone service provider.

•

Rotate the bracket and lock it back as shown below.5.

Telephone installation

Plug one end of the coiled handset cord into the handset jack on the left

side of the telephone base. Plug the other end into the handset and hang up.

If you subscribe to high-speed Internet service (DSL - digital subscriber

line) through your telephone line, you must install a DSL filter between the

telephone line cord and the telephone wall jack. The filter prevents noise and

caller ID problems caused by DSL interference. Please contact your DSL service

provider for more information about DSL filters.

Follow the steps below to install the telephone.

Plug one end of the telephone line cord into the TEL LINE jack on the back

of the telephone base. Plug the other end of the telephone line cord into a

telephone wall jack.

Lift the handset or press SPEAKER to check for a dial tone.

Rotate the top of the display up or down to adjust the angle of the screen

for maximum visibility.

Handset

Coiled handset cord

DSL filter (not included)

is required if you have DSL

high-speed Internet service.

Telephone wall jack

Quick reference guide

REMOVE

When the telephone is

idle, press and hold to

clear the call history.

While reviewing an entry

stored in the speed

dial memory location,

directory or call history,

press to delete.

While entering numbers

or names, press to

cancel and return to

idle mode.

DISPLAY DIAL

Press to dial the

number currently

displayed.

MEM

Press to access the

speed dial memory.

FLASH

During a call, press to

answer an incoming call

if you subscribe to call

waiting service provided

by your telephone

service provider.

Press to cancel an

operation and return to

idle mode.

REDIAL

While using the handset

or speakerphone, press

to dial the last number

dialed.

While editing numbers

in the speed dial

memory or directory,

press to copy the last

number dialed.

CID/

Press to display the call

history.

While using the menu,

press to scroll through

the settings.

While reviewing the

directory or call history,

press to scroll down.

While entering names,

press to insert a space.

While entering numbers,

press to insert a space

(represented by a dash);

press twice to insert a

three-second dialing

pause.

DIR/

Press to enter the

directory.

While using the menu,

press to scroll through

the settings.

While reviewing the

directory or call history,

press to scroll up.

While entering names

(or numbers), press to

backspace and erase a

character (or digit).

SELECT

While using the menu,

press to save the

setting and move to the

next menu option.

While reviewing the call

history, press to show

dialing formats.

Quick reference guide

Press to enter the

menu.

While reviewing the call

history, press to store

the displayed name and

number in the directory.

While reviewing the

directory, press to edit

the displayed entry.

AUDIO ASSIST™

Some voices will sound

louder and clearer

if you press AUDIO

ASSIST while you are

on a call using the

handset.

MUTE

During a call, press

to mute the handset

or speakerphone

microphone. Press

again to resume your

conversation.

SPEAKER

Press to turn the base

speakerphone on or off.

RINGER VOL switch

Slide to adjust the

ringer volume.

VOL switch

Slide to adjust the

listening volume on the

handset.

VOL switch

Slide to adjust the

listening volume on the

speakerphone.

IN USE light

On when the line is in use.

Flashes quickly when there is an incoming call.

Flashes slowly when another telephone on the same line is in

use or no telephone line cord is connected to this telephone.

AUDIO ASSIST light

On when the audio assistance feature is in use.

MUTE light

On when the microphone is muted.

SPEAKER light

On when the speakerphone is in use.

Audio assistTM is a trademark of Advanced American Telephones.

Screen messages and icons

Screen icons

Display screen messages

NEW The displayed call history entry has not been

reviewed.

REP You have received more than one call from this

number.

05 The position of the number stored in the call

history.

The ringer is turned off.

There is an error in the caller ID information.

On when the line is in use.

-OR-

Flashes when there is an incoming call.

The power of the installed batteries is low.

CALL LOG EMPTY There are no call history entries.

DELETED All the entries stored in the call history have been deleted.

-OR-

The last number dialed is deleted.

DIRECTORY EMPTY There are no telephone numbers stored in the directory.

END OF LIST You have reached the end of the call history records.

LINE IN USE Another telephone on the same line is in use.

-OR-

No telephone line cord is connected to the telephone.

LINE RINGING There is an incoming call.

MEMORY FULL The directory is full.

NO NAME FOUND There are no entries in the directory matching the key pressed.

NO NUMBER There is no telephone number in the call history entry you dialed or saved in

the directory.

-OR-

The speed dial memory location or redial memory you accessed is empty.

ONLY 15 ALLOWED The name you entered in the directory is over 15 characters.

ONLY 24 ALLOWED The number you entered in the directory or speed dial memory is over 24

digits.

STORED The entry is saved in the directory or

speed dial memory location successfully.

XX CALLS YY NEW There are XX calls in the call history and YY of them are new and have not

been reviewed.

NEW

REP

No: ERR

16 CALLS 5 NEW

12:00AM 11-20

Making and answering a call

Using handset

To make a call:

Lift the handset then wait for a dial tone.

Use the dial pad keys to dial a number.

To answer a call:

Lift the handset.

To end a call while using the handset:

Place the handset in the telephone base.

Using speakerphone

To make a call:

Press SPEAKER then wait for a dial tone.

Use the dial pad keys to dial a number.

To answer a call:

Press SPEAKER.

To end a call while using the speakerphone:

Press SPEAKER.

Switching between handset and speakerphone

To switch from handset to speakerphone during a call:

Press SPEAKER then place the handset in the telephone base.

To switch from speakerphone to handset during a call:

Lift the handset.

•

8887227702

12:00AM 11-20

Speed dial memory storage

This telephone has 10 speed dial memory locations where you can store

telephone numbers you wish to dial using fewer keys than usual. Use the

following steps to store a telephone number in a desired speed dial memory

location.

When the telephone is idle, press MEM.

Press DIR/or CID/until STORE is blinking.

Press SELECT, the screen shows

ENTER NUMBER.

Use the dial pad keys to enter the telephone

number (up to 24 digits).

To backspace and erase a digit, press

DIR/.

To insert a space between digits, press

CID/. A dash appears on the screen.

To insert a three-second dialing pause,

press CID/twice. A Pappears on the

screen.

To insert a flash signal for using the

service supplied by your telephone service

provider, press FLASH. An Fappears on

the screen.

To copy the last number dialed (up to 24

digits), press REDIAL.

Press SELECT. The screen shows

ENTER LOCATION?

Press a dial pad key (0through 9) to choose

the desired speed dial memory location for

the new entry. The screen shows STORED

and then ENTER NUMBER.

Repeat steps 4 through 6 above to store

a number in another speed dial memory

location.

-OR-

Press REMOVE to return to idle mode.

•

Speed dial memory storage

ENTER NUMBER

8888832445_

ENTER LOCATION?

STORED

ENTER NUMBER

NOTE: If you try to enter

a telephone number with

more than 24 digits, the

screen shows

ONLY 24 ALLOWED.

REVIEW STORE

blinking

Audio assistTM is a trademark of Advanced American Telephones.

AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219.

Printed in China. Issue 6 AT&T 06/10.

www.telephones.att.com

Andere Handbücher für CL2939

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T 830 Bedienungsanleitung

AT&T

AT&T SL82118 Bedienungsanleitung

AT&T

AT&T BELL 2563HB Bedienungsanleitung

AT&T

AT&T 1150 Bedienungsanleitung

AT&T

AT&T 1187 Bedienungsanleitung

AT&T

AT&T 540 Series Einrichtungshandbuch

AT&T

AT&T Plant Series Service-Handbuch

AT&T

AT&T Definity 7406 Plus Bedienungsanleitung

AT&T

AT&T SB3014 Bedienungsanleitung

AT&T

AT&T 984 Bedienungsanleitung

AT&T

AT&T Trimline 230 Bedienungsanleitung

AT&T

AT&T CRL81212 Bedienungsanleitung

AT&T

AT&T E2520 Bedienungsanleitung

AT&T

AT&T Trimline TR1909 Bedienungsanleitung

AT&T

AT&T MDW 9000 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

AT&T

AT&T TRIMLINE 210 Bedienungsanleitung

AT&T

AT&T Merlin II Release 3 Bedienungsanleitung

AT&T

AT&T E1113B Bedienungsanleitung

AT&T

AT&T TL90031 Bedienungsanleitung

AT&T

AT&T 830 Bedienungsanleitung

AT&T

AT&T CL82113 Bedienungsanleitung

AT&T

AT&T Trimline Single Line Business Telephone Bedienungsanleitung

AT&T

AT&T 1080 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung