ATD Tools Atd-7430 Gebrauchsanweisung

Model Atd-7430

Series A

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

!ADVERTENCIA

• Leer, comprender, y seguir las instrucciónes antes

de utilizar el aparato.

• El manual de instrucciónes y la información de

seguridad deben estar comunicado en lengua del

operador antes del uso.

• No seguir estas indicaciónes puede causar daños

personales o materiales.

!WARNING

To avoid crushing and related injuries:

NEVER work on, under or around a

load supported only by a hydraulic

jack. Immediately transfer the load to

an appropriate work station.

U.S. Patent NO. 5,341,723

Hydraulic

Transmission

Jack

Model Number

Atd-7430

Atd-7431

Operating Instructions & Parts Manual

Capacity

1000 lbs

Series A

(Air Actuated Model)

OIPM#7430-1010

Printed in China

Atd Tools Inc.

160 Enterprise Drive, Wentzville, MO 63385

Series A

Model Atd-7431

Series A

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack

before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating

procedures before attempting to use. The owner and operator shall be aware that use and repair of this product

may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's

native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack,

remove from service immediately.

Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any jack that appears

damaged in any way, or operates abnormally shall be removed from service immediately. If the jack has been or

suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately

discontinue use until jack has been checked by a factory authorized service center (contact distributor or manufacturer

for list of authorized service centers). It is recommended that an annual inspection be done by qualied personnel.

Labels and Operator's Manuals are available from manufacturer.

PRODUCT DESCRIPTION

Hydraulic Transmission Jack is designed to be used as an aid in the removal and installation of automotive and

light truck transmissions, transfer cases and transaxles. This telescopic style transmission jack is for use under an

overhead lift or in a garage pit. On air option model Atd-7431 Series A, ensure that your air source can dedicate 7.8

CFM @ 110-175 psi to each jack operated.

NEVER use for any purpose other than those uses outlined above!

SPECIFICATIONS

Model Capacity Min.

Height

Max.

Height Saddle Base Extended

Saddle Area

Jack Size

(L) x (W)

Atd-7430

(Series A)

1000 lb 37-3/4" 78-1/8" 8-7/8" x 7-1/8" 21" x 21"

33-5/8" x 33-5/8"

Atd-7431

(Series A)

PREPARATION

Assembly (refer to Figure 1)

Tools required: 1/2" box end wrench, 19mm wrench, 3/8" hex socket & torque wrench.

1. Three major parts should be included in the package:

(a) Hydraulic unit Assembly;

(b) Saddle Assembly;

2. Attach either one of the two base halves to the base of the hydraulic unit, then secure using allen head bolts and

washers provided. Apply the same procedure to the other base half. Use torque wrench to tighten to 30 lb.ft. Do

not overtighten.

3. Place the socket of the saddle assembly onto the ram piston. Tighten set screw on the socket.

Before Use

Verify that the product and application are compatible, if in doubt call ATD Tools Technical Service line (636)327-

9050.

2. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the

product, its components and recognize the hazards associated with its use.

3. Press the release valve pedal, ensure that saddle is fully lowered. Remove shipping screw and replace with

provided vent screw (shipping screw is located above the oil ller screw).

4. Remove the oil ller screw. Ensure oil level is just below the rim of oil ller hole. Reinstall the oil ller screw.

5. For air option model Atd-7431 Series A, pour a teaspoon of good quality, air tool lubricant into the air supply inlet

of the lift control valve. Connect to air supply and operate for 3 seconds to evenly distribute lubricant.

Note: This unit is equipped with the popular 1/4” NPT air coupler. When installing a different air coupler of your

choice, ensure that thread tape or compound is used when servicing connections. To ensure dependable, trouble

free operation an inline air dryer and oiler is recommended.

6. Ensure that jack rolls freely. Raise and lower the unloaded jack throughout the lifting range before putting into

service to ensure the pump operates smoothly. Replace worn or damaged parts and assemblies with ATD Tools

authorized replacement parts only.

Figure 1- Typical Transmission Jack Components (Atd-7431 Series A shown)

Saddle Plate

Saddle Socket

Tilt Adjustment Knobs

Position Handle

Hydraulic Unit

Lift Pedal Release Valve Pedal

Base Half

Caster

Oil Filler Screw

Shipping Screw

(replace w/ Vent Screw

before initial use)

Ratchet Bracket

*Air Motor

*Air Supply Inlet

*Air Pump Pedal

(*) For air option model Atd-7431 Series A only

OPERATION

Follow the instruction for removal and installation of transmission, transfer case or transaxle according to the vehicle

manufacturer's service manual.

Raise saddle assembly:

Pump foot pedal or press air pump pedal (Model Atd-7431 Series A) until saddle reaches desired position. Secure

load with provided chains.

Note: DO NOT OPERATE BY AIR AND BY HAND PUMPING AT THE SAME TIME.

Ensure center gravity of load is centered on the saddle and load is stable before moving jack. An off-center

transmission could cause the jack to tip or ip over .

Lower saddle:

Be sure all tools and personnel are clear before

lowering load. Slowly engage release valve pedal!

Maintain control of the rate of speed at which the load lowers at all times!

Slowly, gently apply downward pressure to the release valve pedal.

Never use this jack as a workstation!

To avoid crushing and related injuries:

•

Never work on, under or around a load supported only by hydraulic jack.

• Be alert and sober when using this product. Do not operate under the

inuence of drugs or alcohol.

!WARNING

•Read, understand, and follow all printed material provided with and on this product before use.

• Do not exceed rated capacity.

• Use only on hard, level surfaces.

•Adequately support the vehicle before starting repairs.

• If loaded jack must be moved, make certain that load is secured by appropriate means, is stable, is in

the lowest possible position, is moved over a smooth, hard level surface and that the lifting platform

is level.

• Use of this product is limited to removal, installation, and transportation of automotive and light

truck transmissions, transfer cases and transaxles.

• Use only adapters / accessories provided by the manufacturer of this transmission jack.

• Use only adapters / accessories whose rated capacity is greater than the rated capacity of this jack.

• Ensure the center of gravity is center loaded on the saddle.

• Never use this device as a work/repair station. Transfer the load immediately to a suitable work station.

• No alteration shall be made to this product.

• Failure to heed these markings may result in personal injury and/or property damage.

TROUBLESHOOTING

MAINTENANCE

Important: Use only good grade hydraulic jack oil. Avoid mixing different types of uid and NEVER use brake uid,

turbine oil, transmission uid, motor oil or glycerin. Improper uid can cause premature failure of the jack and the

potential for sudden and immediate loss of load. Mobil DTE 13M or equivalent recommended.

Adding oil

1. With saddle fully lowered, set jack in its upright, level position. Remove oil ller screw.

2. Fill until oil is level with the oil ller screw hole, reinstall oil ller screw.

Changing oil

For best performance and longest life, replace the complete uid supply at least once per year.

1. With saddle fully lowered, remove oil ller screw.

2. Lay the jack on its side and drain the uid into a suitable container.

Note. Dispose of hydraulic uid in accordance with local regulations.

3. Set jack in its level position.

Fill until oil is level with the oil ller screw hole, reinstall oil ller screw.

Lubrication

1. A periodic coating of light lubricating oil to pivot points, axles and hinges will help to prevent rust and assure that

casters and pump assemblies move freely.

2. For air option models Atd-7431 Series A: When used on a daily basis, air pump model should be internally lubricated

before each use. Use only good quality air tool lubricant. If no inline oiler is used, pour a teaspoon of air tool oil into

the inlet of the air supply inlet. Simply operate the jack using the air feature in order to fully distribute the oil.

Cleaning

Periodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with an oily

cloth.

Note: Never use sandpaper or abrasive material on these surfaces!

Storage

When not in use, store the jack with saddle fully lowered.

Symptom Possible Causes Corrective Action

Jack will not lift load • Release valve not tightly closed

• Load is too heavy

• Ensure release valve tightly closed

•Consider higher capacity jack

Jack will lift, but not maintain

pressure

•Release valve not tightly closed

•Hydraulic unit malfunction

•Ensure release valve tightly closed

•Discontinue use, Contact ATD

Tools Tech. Service

Jack will not lower after unloading • Reservoir overlled

• Linkage binding

• Ensure load is removed, then drain

uid to proper level

• Clean and lubricate moving parts

Poor lift performance • Fluid level low

•Hydraulic unit malfunction

• Ensure proper uid level

•Discontinue use, Contact ATD

Tools Tech. Service

Jack will not lift to full extension • Fluid level low • Ensure proper uid level

Replacement Parts Illustration for Models Atd-7430 Series A and Atd-7431 Series A:

Atd-7430 Series A

Replacement Parts

REPLACEMENT PARTS

Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of this kit are replace-

ment items, but are illustrated as a convenient reference of location and position in the assembly sequence. When

ordering parts, give Model number, serial number and description below. Call or write for current pricing:

Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385 Tel:(636)327-9050 Fax:(636)327-9046

Atd-7431 Series A

Replacement Parts

Replacement Parts List for Models Atd-7430 Series A & Atd-7431 Series A:

Item Description Qty.

28 U-Cup, Ram 2

29 O-Ring 1

30 O-Ring 3

31 O-Ring 1

32 Back-up Washer 1

33 O-Ring 1

34 O-Ring 1

35 Filter 1

36 O-Ring 1

37 Back-up Washer 1

38 Back-up Washer 1

39 O-Ring 1

40 O-Ring 1

41 Back-up Washer 1

42 Seal 1

43 Seal 1

44 Back-up Washer 1

45 Back-up Washer 1

46 O-Ring 1

47 O-Ring 1

48 O-Ring 1

49 Back-up Washer 1

G3601S-111

(Atd-7430 Series A)

G3600S-130

(Atd-7431 Series A)

Repair Kit for Hydraulic

Unit (includes parts

28 - 49)

Item Part No. Description Qty.

1 G360-20000-000 Leg Assembly 2

2 G360-90030-K04 Bolt Set (4 sets) 1

3G360-90030-K02 Caster, 3" Dia. 2

4G360-90030-K01 Caster w/ Brake 2

5 5105-08015-000 Socket Head Bolt 1

6 4200-03500-000 Tilt Screw Assy. 2

7G360-40000-000 Saddle Head Assembly 1

8 A070-90038-K02 Screw Assembly 2

9 G360-90009-K01 Vent Screw Assembly 1

10 G390-20000-000 Handle Assembly 1

11 G251-00007-000 Handle Grip 2

12 5104-10040-000 Bolt 1

13 5206-00010-000 Nylon Nut 1

14 G390-10005-000 Release Valve Pedal

(2pc. for Atd-7431 Series A)

15 5405-07027-000 Pin

(2pc. for Atd-7431

Series A)

16 5405-02018-000 Retaining Pin

(2pc. for Atd-7431 Series A)

17 G390-30000-000 Lift Pedal 1

18 5405-12070-000 Axle 1

19 5405-02028-000 Retaining Pin 1

20 G831-00002-000 Coupler, Male 1/4NPT

(Atd-7431 Series A only) 1

21 G360-10003-000 Air Hose

(Atd-7431 Series A only) 1

22 G360-10002-000 Spring

(Atd-7431 Series A only) 1

23 G360-16000-000 Hose Connector, Elbow

(Atd-7431 Series A only) 2

24 G360-17000-000 Air Motor

(Atd-7431 Series A only) 1

25 5308-00120-000 Copper Washer

(Atd-7431 Series A only) 1

26 G390-41000-000 Nylon Strap Assy 1

27 5102-10016-000 Bolt 1

Repair Kit Contents:

ONE YEAR LIMITED WARRANTY

For a period of one (1) year from date of purchase, Atd Tools Inc. will repair or replace, at its option, without charge,

any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied

warranty not excluded hereby.

Performance of any obligation under this warranty may be obtained by returning the warranted product, freight

prepaid, to Atd Tools Inc. Warranty Service Department, 160 Enterprise Drive, Wentzville, MO 63385.

Except where such limitations and exclusions are specically prohibited by applicable law, (1) the CONSUMER'S

SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS

DESCRIBED ABOVE, and (2) Atd Tools Inc. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDEN-

TAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIED

WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE (1) YEAR FROM DATE OF PURCHASE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply

to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above

limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also have

other rights which vary from state to state.

Atd Tools Inc.

160 Enterprise Drive, Wentzville, MO 63385

Tel: (636)327-9050 Fax: (636)327-9046 www.atdtools.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ATD Tools Jack Handbücher

ATD Tools

ATD Tools 7345B Bedienungsanleitung

ATD Tools

ATD Tools ATD-7383W Bedienungsanleitung

ATD Tools

ATD Tools ATD-7429 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7431A Bedienungsanleitung

ATD Tools

ATD Tools ATD-7435A Bedienungsanleitung

ATD Tools

ATD Tools ATD-7406 Gebrauchsanweisung

ATD Tools

ATD Tools 7425A Bedienungsanleitung

ATD Tools

ATD Tools ATD-7435 Gebrauchsanweisung

ATD Tools

ATD Tools ATD-7447 Gebrauchsanweisung

ATD Tools

ATD Tools ATD-7237 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7421W Bedienungsanleitung

ATD Tools

ATD Tools ATD-7461 Bedienungsanleitung

ATD Tools

ATD Tools 7435 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7438 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7391A Bedienungsanleitung

ATD Tools

ATD Tools ATD-7465 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7328 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7304 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7385W Bedienungsanleitung

ATD Tools

ATD Tools 7404 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7317 Service-Handbuch

ATD Tools

ATD Tools ATD-7344B Bedienungsanleitung

ATD Tools

ATD Tools ATD-7343 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7437A Bedienungsanleitung

Beliebte Jack Handbücher anderer Marken

Omega Lift Equipment

Omega Lift Equipment 18122C Gebrauchsanweisung

Pittsburgh

Pittsburgh 58816 Montageanleitung

Unimec

Unimec TP Bedienungsanleitung

Sonic

Sonic 4800703 Bedienungsanleitung

BGS technic

BGS technic 70039 Bedienungsanleitung

TradeQuip

TradeQuip 1128T Bedienungsanleitung

VEVOR

VEVOR TJD-12000SP-F Bedienungsanleitung

ULTIMATE SPEED

ULTIMATE SPEED URW 2 A1 HYDRAULIC TROLLEY JACK Bedienungsanleitung

Stels

Stels 51131 Bedienungsanleitung

Bushranger

Bushranger RJX01 Bedienungsanleitung

Clarke

Clarke CTJ2500QLG Installations- und Betriebshandbuch

Valex

Valex 1650520 Bedienungsanleitung

Pfaff

Pfaff Merkur M0 Bedienungsanleitung

Beta

Beta 3050/K Beilage

Sealey

Sealey 1050CXHV Bedienungsanleitung

Jung

Jung JH Series Bedienungsanleitung

URIAH

URIAH UC200020 Bedienungsanleitung

Kennedy

Kennedy KSJ010 Bedienungsanleitung