Atlanta BYK m200 Bedienungsanleitung

BYK m200

Moisture Meter

Measure what you see.

Manual

BYK-Gardner GmbH

Lausitzer Str. 8

D-82538 Geretsried

Germany

Tel. 0-800-gardner

(0-800-4273637)

+49-8171-3493-0

Fax +49-8171-3493-140

BYK - Gardner USA

9104 Guilford Road

Columbia, MD 21046

USA

Phone 800-343-7721

301-483-6500

Fax 800-394-8215

301-483-6555

BYK m200

Moisture Meter

www.byk-instruments.com

November 2019

Manual

Tabe of Contents

1 Safety Information .............................................................................05

2 Preparations ........................................................................................06

3 System Description .............................................................................07

4 Power On/OFF.....................................................................................09

5 Measurement ......................................................................................10

6 Moisture Measurement ......................................................................11

7 Settings................................................................................................17

8 Battery .................................................................................................20

9 Technical Data .....................................................................................21

1 Safety Information

CAUTION!

Read Instruction Manual before using this instrument.

WARNING!

This manual cannot address all of the safety considerations

associated with its use. It is the responsibility of the user to

consult this manual and establish appropriate safety practices

for use with this equipment and the individual material being

tested.

WARNING!

The BYK m200 Moisture Meter is designed and intended for

the use described in this manual. Using the Moisture Meter

for other purposes for which it was not designed may reduce

or eliminate the protection offered by the features of the

instrument. Serious injury may result.

WARNING!

Ultimate disposal of this product should be handled according

to all national laws and regulations.

Please note the following points:

• Familiarize yourself with the layout and

operation of the controls.

2 Preparations

Moisture meter for wood and building materials. The BYK m200

measures the moisture level for a variety of wood and building

materials. The meter also measures the ambient temperature &

humidity. The displayed value is material moisture in % with respect

to dry mass.

Example:

100% material moisture for 1 kg of wet wood = 500g water.)

IMPORTANT!

• Always keep the instrument dry

• Pay attention to the electrodes whenever the protective cap

is removed. They are sharp!

• Clean dirt and debris from the measuring electrodes

• Replace batteries when the battery warning symbol appears

Power On & Mode key

3 System Description

Protective cap

Test electrode

Ambient Temperature &

Humidity Sensor

Digital and analog LCD display

SET key

CLR key

Self-Test point

3.0 OVERVIEW

3 System Description

Low battery indicator

3.1 DISPLAY

Set menu indicator:

TEMPsetting compensation temperature

LIGHTsetting backlight mode

UNITsetting ambient temperature units

Digital Display of ambient

temperature & humidity

TEST measurement mode

Bar-graph display of

measured MIN/Max values

Bar-graph display of

material moisture value

Digital display of

material moisture in %

DRY / MOIST / WET indicator

Building materials (B1,B2,B3,B4)

Wood group (W1,W2,W3)

4 Power

4.0 POWER ON/OFF

Press the “MODE” key for about 2 seconds, the device will power

on, when the device is activated, the display will show the ambient

temperature for 2 seconds. Press the “MODE” key for about 2

seconds, the device will power off. If not being used, the device will

auto power off after 3 minutes.

(1) Power on (Press about 2s) (2) Initial Display (3) Start Measuring

5 Measurement

5.0 MEASURING AMBIENT TEMPERATURE & HUMIDITY

The device measures the ambient temperature & relative humidity.

The ambient temperature is used as a temperature compensation

to increase the moisture accuracy. Press the “SET” key for about 2

seconds, the display will switch between temperature and humidity.

To can change the temperature units from °C to °F in the settings

menu, please refer to chapter 7.4.

Press about 2s Press about 2s

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Atlanta Messgerät Handbücher

Atlanta

Atlanta BYK Acquire Color Compact Handbuch

Atlanta

Atlanta BYK byko-test lite Bedienungsanleitung

Atlanta

Atlanta BYK spectro2profiler Bedienungsanleitung

Atlanta

Atlanta ASF 2045 Bedienungsanleitung

Atlanta

Atlanta BYK spectro2profiler Bedienungsanleitung

Atlanta

Atlanta BYK byko-cup M Bedienungsanleitung

Atlanta

Atlanta BYK a200 Bedienungsanleitung

Atlanta

Atlanta BYK byko-test Bedienungsanleitung

Atlanta

Atlanta BYK spectro2profiler Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung