Atlona AT-DVI40SRS Bedienungsanleitung

AtlonA

1080p DVI Extender over Single CAT5 up to 200ft

User’s anual

ODELS: AT-DVI40SRS

[Rev.0911]

ABLE OF CONTENTS

1. Introduction ............................................................................

2. Specifications & Package Contents .............................................................

3. Panel Description ..............................................................................

4. Hardware Installation ..............................................................................

5. Performance Guide ..............................................................................

6. Safety Information ..............................................................................

7. Warranty .............................................................................

8. Atlona Product Registration ........................................................................

INTRODUCTION

The AT-DVI40SRS 1080p DVI Extender over Single CAT5 extends your PC DVI

transmission distance up to 60m (200ft) at 1024x768@60Hz. With AT-DVI40SRS, users

can transmit high quality digital video of PC applications through one cost effective Cat-

5/5e/6 cables to the remote monitor or projector, instead of using short and expensive DVI

cables. With embedded EDID inside the extender, your PC will continue to send the digital

video even when the monitor is not connected. The user can then disconnects the monitor,

place it in a remote location and reconnect it without rebooting the operating system.

The AT-DVI40SRS includes two units: transmitting and receiving units. The transmitting

unit is connected to your PC DVI output and the receiving unit is connected to the monitor.

While successfully connected, the two LED lights on the RJ-45 connector will blink. The

transmission distance between the sending and receiving units can be up to 60m (200ft) at

XGA (1024x768@60Hz) and 30m (100ft) at UXGA (1600x1200@60Hz), 1920x1200 (50ft)

With compact size, AT-DVI40SRS is the most cost effective choice for bringing your impressive

digital video to the remote display.

Features:

DVI 1.1 compliant

Handy DVI-D to RJ-45 adapter

Extends the transmission distance from the sources up to 60m/200ft at XGA

(1024x768@60Hz) and 30m/100ft at UXGA (1600x1200@60Hz) and 1920x1200 (50ft)

Minimize the cable skew by adjustable 8-level equalization rotary control

Supports 1080i/1080p HDTV resolutions & VESA standards

Receiving unit can learn EDID information for DVI/HDMI supported display device

The length depends on the characteristics and quality of the cables. Higher resolutions and

longer transmission distances require low skew cables (<25ns/100m) for best performance.

Unshielded CAT6 with metal RJ-45 connectors is recommended.

SPECIFICATIONS & PACKAGE CONTENTS

Model Name AT-DVI40SRS

Technical

Role of usage Transmitter [TX] Receiver [RX]

DVI compliance DVI 1.1

HDCP compliance No

Video bandwidth Single-link 165MHz [4.95Gbps]

Video support Up to WUXGA [1920x1200@60Hz] & UXGA

[1600x1200@60Hz]

DVI over CAT5e

transmission 1920x1200@60Hz – 30m [100ft]

1024x768@60Hz – 60m [200ft]

Audio support No audio for DVI signal

Signal equalization 8-level digital at RX

Input TMDS signal 1.2 Volts [peak-to-peak]

Input DDC signal 5 Volts [peak-to-peak, TTL]

Input 1x DVI 1x RJ-45

Output 1x RJ-45 1x DVI

DVI connector

DVI-I [29-pin male digital only] DVI-I [29-pin female digital only]

RJ-45 connector WE/SS 8P8C with 2 LED indicators

Rotary switch None 8-level digital control

Mechanical

Housing Plastic molding Metal enclosure

Dimensions

[L x W x H] Model 40x50x20mm [1.6”x2”x0.8”] 80x90x25mm [3.2”x3.5”x1”]

Package

170x115x40mm [6.7”x4.5”x1.6”]

Weight Model 50g [1.8 oz] 180g [6.4oz]

Package

550g [1.2 lbs]

Fixedness Direct plug-in Wall-mounting with screws

Power supply None 5V DC

Power consumption 1 Watt [max]

Operation temperature

0~40°C [32~104°F]

Storage temperature -20~60°C [-4~140°F]

Relative humidity 20~90% RH [no condensation]

Package Contents 1x AT-DVI40SRS

1x 5V power supply unit

1x User's Manual

PANEL DESCRIPTION

Front Panel — Receiving Unit of AT-DVI40SRS

DVI OUT: Connect to a DVI display with a male-male DVI cable here.

Signal Level: Adjust the 8-level signal equalization control to the received DVI signals. The

DVI signal level varies from 0 (strongest) to 7 (weakest) for respective

transmission length from longest possible range to short distance. Please adjust

the signal level from 7 to 0 and stop turning the rotary switch whenever the video

is playing normally. Inappropriate signal level setting may cause overpowering

issue that would shorten the product life significantly!

Note for EDID (Extended Display Identification Data) learning

Plug in a male-male DVI cable between DVI OUT and the monitor and power on the receiving

unit.

Turn Signal Level counterclockwise [] to 7. The LED on the RJ-45 connector will dim and light

again in a few seconds, which indicates the monitor’s EDID is retrieved. DO NOT let the rotary

arrow pass 6which will erase the EDID just learned and set back to default EDID.

Unplug the male-male DVI cable from the monitor and connect it to the mini-transmitter of AT-

DVI40SRS. The LED on the RJ-45 connector will dim and light again in a few seconds, which

indicates the EDID learning procedure is complete.

Unplug the male-male DVI cable from the mini-transmitter and reconnect it to the monitor.

Connect the mini-transmitter of AT-DVI40SRS to the DVI source and enjoy the visual experience.

To restore the EDID back to default value, please turn Signal Level clockwise [] from anywhere

to 6. The LED on the RJ-45 connector will dim and light again in a few seconds, which indicates

the EDID is restored to default.

PANEL DESCRIPTION

Rear Panel — Receiving Unit of AT-DVI40SRS

DVI Signal IN: Plug in a Cat-5/5e/6 cable to be linked to the RJ-45 connector of the

transmitting unit

+5V DV: Connect to 5V DC power supply.

HARDWARE INSTALLATION

1. Connect the mini-transmitter to your DVI source (PC).

2. Connect the receiver to the remote DVI monitor.

3. Make sure the Cat-5/5e/6 cable is tightly connected and not loose.

4. Enjoy your high quality PC video on the screen.

5. If you see flickering or blinking image on the display, please adjust the rotary control

switch to improve the cable skew. 0 stands for the strongest DVI signal level for longest

possible transmission length while 7 stands for the weakest DVI signal level for short

transmission length. Please adjust the signal level from 7 to 0 and stop turning the rotary

switch whenever the video is playing normally. Inappropriate signal level setting may

cause overpowering issue that would shorten the product life significantly!

DVI DVI Monitor

DVI40SRS

Transmitter AT-DVI40SRS

Receiver

Cat-5/5e/6 Cable

PERFOR ANCE GUIDE

Performance rating Type of CAT5/6 cable

Wiring Shielding CAT5 CAT5e CAT6

Solid Unshielded (UTP)   

Shielded (STP)   

Stranded

Unshielded (UTP)  

Shielded (STP) 

Termination Please use EIA/TIA-568-B termination (T568B) at any time

SAFETY INFOR ATION

Safeguards

To reduce the risk of electric shock, do not

expose this product to rain or moisture.

If the wall plug does not fit into your local

power socket, hire an electrician to replace

your obsolete socket.

Do not modify the wall plug.

Doing so will void the warranty and safety

features.

This equipment should be installed near

the socket outlet and the device should

be easily accessible in case it requires

disconnection.

Precautions

FCC Regulations state that any

unauthorized changes or modifications to

this equipment not expressly approved by

the manufacturer could void the

user’s authority to operate this

equipment.

Operate this product using only the

included external power supply. Use of

other power supplies could impair

performance, damage the product or cause

fires.

In the event of an electrostatic discharge,

this device may automatically turn off. If this

occurs, unplug the device, and plug it back

in.

Protect and route power cords so they will

not be stepped on or pinched by anything

placed on or against them. Be especially

careful of plug-ins, or cord exit points from

this product.

Avoid excessive humidity, sudden

temperature changes or temperature

extremes.

Keep this product away from wet locations

such as bathtubs, sinks, laundries, wet

basements and swimming pools.

Use only accessories recommended by

ATLONAto avoid fire, shock or other

hazards.

Unplug the product before cleaning. Use

a damp cloth for cleaning. Do not use

cleaning fluid or aerosols, which could

enter the unit and cause damage, fire or

electrical shock. Some substances may

also mar the finish of the product.

Never open or remove unit panels or make

any adjustments not described in this

manual. Attempting to do so could expose

you to dangerous electrical shock or other

hazards. It may also cause damage to your

AT-DVI40SRS. Opening the product will

void the warranty.

Do not attempt to service the unit. Instead

disconnect it and contact yourAuthorized

ATLONAreseller or contact ATLONA

directly.

WAR

ARAR

ARR

RANTY

ANTYANTY

ANTY

WARRANTY

1. LIMITED WARRANTY

Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance

with the accompanying written materials for a period of 3 YEARS from the date of receipt and (b) that the

Product will be free from defects in materials and workmanship under normal use and service for a period

of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is

limited to 3 years from the date of receipt. Some jurisdictions do not allow such limitations on duration of

an implied warranty, so the above limitation may not apply to Customer.

2. CUSTOMER REMEDIES

Atlona Technologies and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona

Technologies’ option, either return of the price paid for the Product, or repair or replacement of the Product

that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of

Customer’s receipt. This Limited Warranty is void if failure of the Product has resulted from accident,

abuse, or misapplication. Any replacement Product will be warranted for the remainder of the original

warranty period or 3 year, whichever is longer.

3. NO OTHER WARRANTIES

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS

SUPPLIERS DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING,

BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, WITH REGARD TO THE PRODUCT AND ANY RELATED WRITTEN

MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPECIFIC LEGAL RIGHTS. CUSTOMER

MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.

4. NO LIABILITY FOR DAMAGES

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL ATLONA

TECHNOLO- GIES OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING

WITHOUT LIMITA- TION, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR

PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF

BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR

INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA TECHNOLOGIES HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA TECHNOLOGIES’ AND ITS

SUPPLIERS’ ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED

TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT. BECAUSE SOME JU-

RISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

ATLONA

2151 O’toole Ave, Ste D

San Jose, CA 95131

Toll Free: 1-877-536-3976

International: 408-954-8782

FAX: 408-954-8792

Website: www.atlona.com

E-MAIL: [email protected]m

Andere Handbücher für AT-DVI40SRS

Inhaltsverzeichnis

Andere Atlona Extender Handbücher

Atlona

Atlona AT-HD-RG100SR Bedienungsanleitung

Atlona

Atlona AT-VGA-RS300SRS Bedienungsanleitung

Atlona

Atlona AT-VBNC400SR Bedienungsanleitung

Atlona

Atlona AT-HD-RG100SR Bedienungsanleitung

Atlona

Atlona AT-HD4-V110SR Bedienungsanleitung

Atlona

Atlona AT-COMP150SR Bedienungsanleitung

Atlona

Atlona AT-UHD-EX-100CE-RX-PSE Bedienungsanleitung

Atlona

Atlona AT-2VGA300SL Bedienungsanleitung

Atlona

Atlona AT-UHD-EX-70-KIT Bedienungsanleitung

Atlona

Atlona AT-2VGA300SL Bedienungsanleitung

Atlona

Atlona AT-USB50-SR Bedienungsanleitung

Atlona

Atlona AT-DVI4-100SR Bedienungsanleitung

Atlona

Atlona AT-HDTX Bedienungsanleitung

Atlona

Atlona AT-HD50SS Bedienungsanleitung

Atlona

Atlona AT-HD-RG100SR Bedienungsanleitung

Atlona

Atlona ATAEX702PSK Bedienungsanleitung

Atlona

Atlona AT-HDMI40SRS Bedienungsanleitung

Atlona

Atlona AT-IR300SRS Bedienungsanleitung

Atlona

Atlona AT-DVI15SRS Bedienungsanleitung

Atlona

Atlona AT-RGVF30S-IR Bedienungsanleitung

Atlona

Atlona AT-SDI10SR-LC Bedienungsanleitung

Atlona

Atlona AT-IR300SRS Bedienungsanleitung

Atlona

Atlona AT-PRO2HD1616M-RX Bedienungsanleitung

Atlona

Atlona AT-DVIDF40SR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung