Atlona AT-HD-IR40SR Bedienungsanleitung

http://www.atlona.com/

Atlona

HDMI v1.3 Extender over 2 CAT5e Cables with IR

A T -HD-IR40SR

User Manual

Safety and Notice

The Atlona AT-HD-IR40SR HDMI v1.3 Extender over 2 C A T 5e Cables with IR has

been tested for conformance to safety regulations and requirements, and has been

certified for international use. However, like all electronic equipments, the A T -HD-IR40SR

should be used with care. Please read and follow the safety instructions to protect

yourself from possible injury and to minimize the risk of damage to the unit.

Follow all instructions and warnings marked on this unit.

Do not attempt to service this unit yourself, except where explained in this manual.

Provide proper ventilation and air circulation and do not use near water.

Keep objects that might damage the device and assure that the placement of this

unit is on a stable surface.

Use only the power adapter and power cords and connection cables designed for

this unit.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

Features

The Atlona AT-HD-IR40SR HDMI v1.3 Extender over 2 C A T 5e Cables with IR

boosts up your video/audio transmission distance up to 60m / 200ft in HDTV 720p /

1080i format. With two low cost CAT-5/5e/6 cables, users can readily extend HDTV

sources from DVD players, Blu-ray Disc Player, PS3, PC, and any other kinds of

sources compliant with TMDS to distant display monitors including HDMI / DVI

enabled TV sets or LCD PC monitors. This cost effective flexibility makes HDCP

compliant DVD players or PS3 transmit high quality video and audio to a greater

distance at the minimal cost, when integrating several components apart. In addition,

with the included infrared (IR) receiving and transmitting extension cables to facilitate

the control path, users can enjoy high quality audio/video and control the HDMI

sources from the remote site instantly.

The A T -HD-IR40SR includes two units: A T -HD-IR40S as the transmitting unit

and A T -HD-IR40R as the receiving unit. The transmitting unit is used to transfer the

HDMI/DVI and IR signals input and carry the signals through two RJ-45 connectors

over two low cost CAT-5/5e/6 cables. The receiving unit is responsible for equalizing

transferred TMDS multimedia data and re-sending IR signals. The transmission

distance between the sending and receiving units can be up to 60m / 200ft at 720p /

1080i and 40m / 130ft at 1080p. With equalization control on the receiving unit, users

can adjust the equalization scale to the received TMDS signals, and therefore

optimize the transmission distance between source and destination.

HDMI 1.3a compliant

Extends the transmission distance up to 60m / 200ft from the sources at 1080i

or 720p

Extends the transmission distance up to 40m / 130ft from the sources at 1080p

Provides independent DDC channel, fully HDCP compliant

Minimizes the cable skew by adjustable 8-level equalization control

Embedded IR control path

Introduction

Package Contents

Technical Specifications

Video Bandwidth: 10.2 Gbps (HDMI 1.3a)

Input connector:

Transmitter: 1x female HDMI connector (19 pin type)

Receiver: 2x RJ-45

IR Socket:

Electro-optical Characteristics: (Ta=25°C)

Parameter

T Y P .

UNIT

B . P . F Center Frequency

KHz

Output connector:

Transmitter: 2x RJ-45

Receiver: 1x female HDMI connector (19 pin type)

IR Socket:

Electro-optical Characteristics: (Ta=25°C)

Parameter

T Y P .

UNIT

B.P.F Center Frequency

KHz

Input TMDS signal: 1.2 volts (peak-to-peak)

Input DDC signal: 5 volts (peak-to-peak)

HDMI Connector: 19 pin type female connector

Power Supply: 5V 4A DC

Power Consumption: 6 Watts (max)

Dimensions: 85mm x 60mm x 25mm / 3.3”x2.4”x1” (L x W x H)

Weight: 240g / 8.5oz

1x HDMI transmitting unit (A T -HD-IR40S)

1x HDMI receiving unit (A T -HD-IR40R)

2x IR extension cable (IR sender & IR receiver)

1x 5V 4Apower adapter

1x User Manual

Front View – Transmitting Unit A T -HD-IR40S

Rear View – Transmitting Unit A T -HD-IR40S

TMDS

DDC

Panel Descriptions

TMDS: Plug in a CAT-5/5e/6 cable that needs to be linked to the

TMDS connector of the receiving unit A T -HD-IR40R.

DDC: Plug in a CAT-5/5e/6 cable that needs to be linked to the

DDC connector of the receiving unit A T -HD-IR40R.

5V DC:Connect to 5V DC power supply.

HDMI IN

EXTENDER

5V DC

HDMI IN: Connect a HDMI source with a HDMI M-M cable here

IR EXTENDER: Extendable IR sending socket

Front View - Receiving Unit A T -HD-IR40R

Rear View – Receiving Unit A T -HD-IR40R

TMDS

DDC

TMDS: Plug in a CAT-5/5e/6 cable that needs to be linked to the

TMDS connector of the transmitting unit A T -HD-IR40S.

DDC: Plug in a CAT-5/5e/6 cable that needs to be linked to the

DDC connector of the transmitting unit A T -HD-IR40S.

5V DC: Connect to 5V DC power supply.

HDMI OUT: Connect a HDMI display with a HDMI M-M cable here.

EQ: Adjust the equalization strength to the received TMDS signals.

0-to-7 = strongest–to-weakest.

IR EXTENDER: Extendable IR reception socket

HDMI OUT

5V DC

EXTENDER

1. Connect your HDMI / DVI source (such as a DVD player) to the transmitting unit

A T -HD-IR40S.

2. Connect the IR transmitting cable to the transmitting unitA T -HD-IR40S, and make the

IR transmitter directly point to the IR of HDMI source.

3. Connect your HDMI / DVI display (such as an LCD TV or plasma TV) to the receiving

unitA T -HD-IR40R.

4. Connect the IR receiving cable to the receiving unit A T -HD-IR40R, and make the IR

receiver directly point to the user.

5. Connect your CAT-5/5e/6 cables between the transmitting and receiving units.

6. Make sure your CAT-5/5e/6 cables are tightly connected and not loose.

7. Plug in 5V DC power cord to the power jack of the receiving unit A T -HD-IR40R.

8. If a flickering or a blinking image is shown on the display, please try to adjust

the rotational EQ control to improve the cable skew. 0 stands for the strongest

EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0.

Hardware Installation

1. If your HDMI / DVI device requires an EDID at present, you can use an EDID

Reader/Writer to provide HDMI / DVI EDID information.

2. All the transmission distances are measured using Belden CAT-5e 125MHz.

3. To reduce the interference among the unshielded twisted pairs of wires in

C A T -5/5e/6 cable, you can use shielded CAT-5/5e/6 cables to improve EMI

problems, which is worsen in the long transmission.

4. Because the quality of the CAT-5/5e/6 cables has the major effects in how long

transmission distance will be made and how good is the received display, the

actual transmission length is subject to your CAT-5/5e/6 cables. For resolution

greater than 1080i or 1280x1024, a CAT-6 cable is recommended.

Atlona

Address

2151 O’Toole Ave Unit D, San Jose, CA 95131

Phone

Toll Free (US & Canada only): 1-877-536-3976

Contact phone: 1-408-954-8782

Fax

1-408-954-8792

info@atlona.com

Notice

Contact Information

Andere Handbücher für AT-HD-IR40SR

Inhaltsverzeichnis

Andere Atlona Extender Handbücher

Atlona

Atlona AT-HD4-SI40SR Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

Atlona

Atlona AT-HDVS-150-TX-WP Bedienungsanleitung

Atlona

Atlona AT-2VGA300SL Bedienungsanleitung

Atlona

Atlona AT-RGVF30S-IR Bedienungsanleitung

Atlona

Atlona AT-2VGA300SL Bedienungsanleitung

Atlona

Atlona AT-RS232SRS Bedienungsanleitung

Atlona

Atlona AT-HD50SS Bedienungsanleitung

Atlona

Atlona AT-DVI50S Bedienungsanleitung

Atlona

Atlona AT-VBNC400SR Bedienungsanleitung

Atlona

Atlona AT-HD-BIR40SR Bedienungsanleitung

Atlona

Atlona AT-HD-RG100SR Bedienungsanleitung

Atlona

Atlona AT-COMP150SR Bedienungsanleitung

Atlona

Atlona AT-UHD-EX-100CE-TX Bedienungsanleitung

Atlona

Atlona AT-HDF20SR Bedienungsanleitung

Atlona

Atlona AT-HD-V40SRS Bedienungsanleitung

Atlona

Atlona AT-2VGA300SL Bedienungsanleitung

Atlona

Atlona AT-80120HD Bedienungsanleitung

Atlona

Atlona AT-VGA100-SR Bedienungsanleitung

Atlona

Atlona AT-PRO3HDREC Bedienungsanleitung

Atlona

Atlona AT-DVI4-100SR Bedienungsanleitung

Atlona

Atlona AT-HDMI40SR Bedienungsanleitung

Atlona

Atlona AT-AVGA-SR Bedienungsanleitung

Atlona

Atlona AT-DVI40SRS Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung