Atmor INLINE 900 Bedienungsanleitung

Hot Water on Demand

Step 4

Connect the Cold water hose to

the inlet on the left side of the unit.

(Don't forget to insert rubbers).

Be sure to use reinforced hose.

Be sure to close it properly.

Step 1

Find the optimal place.

Drill 4 holes and insert Plugs.

Step 2

Open the entrance cable in the

back of the unit.

Be sure to open the side of the

cable

Step 3

Hang the unit on the wall by 4

screws.

Don't forget to inset the electric

cable before.

Step 5

Connect the Hot water hose to the

outlet (Don’t forget the rubbers).

Be sure to use reinforced hose.

Be sure to close it well.

Open the water supply and check for

leakage around the hoses.

If there is no leakage - Go to step 6

leakage

Check again.

Don’t continue unless you sure

there is no leakage.

Step 6

Connect the electric cable to the

Terminal block.

Step 7

Close the cover by 4 short

screws

After closing the screws

Insert the Gray Bottom cover

OUTLET

INLET

Atmor Super 900 - Assembly Steps

FREEPHONE 0800 101 201 / sales@atmor.co.nz / www.atmor.co.nz

External PRD installed

at water inlet

Hot Water on Demand

Step 1

Fit isolating tap on

cold water supply

Step 2

Having already entered the

power cable, connect to the

terminal block.

Step 7

Blue Wave 402 - Assembly Steps

FREEPHONE 0800 101 201 / sales@atmor.co.nz / www.atmor.co.nz

Position heater at

eye level or higher.

Fix to the wall 2 top

and 1 bottom screw

Step 6

Step 4

Assemble and fit the sliding

shower bar to the wall including

the shower hose and rose

Step 3

Turn on the water to fill

the heating chamber and

check for leaks

Connect cold water supply

inlet hose

Step 5

Attach the front cover, round

the knobs to match the correct

pivot and secure by screw

top and bottom.

For further information on installation and operation

please refer to leaflet enclosed with the heater.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Atmor Boiler Handbücher

Atmor

Atmor InLine-3.0 Bedienungsanleitung

Atmor

Atmor AT900-04 Bedienungsanleitung

Atmor

Atmor AT900-04 Betriebsanleitung

Atmor

Atmor Europe InLine 800 Series Betriebsanleitung

Atmor

Atmor 100 Series Betriebsanleitung

Atmor

Atmor Blue Wave Bedienungsanleitung

Atmor

Atmor ThermoPro Series Bedienungsanleitung

Atmor

Atmor New Bedienungsanleitung

Atmor

Atmor HOTAP Betriebsanleitung

Atmor

Atmor Enjoy Betriebsanleitung

Atmor

Atmor Platinum Bedienungsanleitung

Atmor

Atmor Thermo Pro2 Series Bedienungsanleitung

Atmor

Atmor InLine 800 Series Betriebsanleitung

Atmor

Atmor Super 900 Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

Applimo

Applimo Edel AIR Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

A.O. Smith

A.O. Smith Gphe 50 Bedienungsanleitung

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung