ATTACK AK200K Bedienungsanleitung

THE ACCUMULATION TANKS

ATTACK®

AK/AS, HR/HRS, TUV/TUVS, S/SS

INSTRUCTION MANUAL

W W W . A T T A C K . S K

CONTENTS

1. General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2. Description of device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.1. Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.2. Thermal insulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.3. Speciﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3. Technical data and dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 11

4. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.1. Connection to the heat source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.2. Connection of the electrical heating bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6. Putting into the operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

7. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

8. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

THE ATTACK ACCUMULATION TANKS

The ATTACK, s.r.o. company is the largest manufacturer of the accumulation tanks in Slovakia

with the widest oﬀer of these items.

1. GENERAL INFORMATION

This instruction manual is an inseparable and important part of the product. Read the instruc-

tions given in this manual carefully, as they contain important information about safety, installa-

tion, usage and maintenance. Keep this manual to be eventually used in future. This appliance is

constructed for accumulation and subsequent distribution of the heat energy from the heat sourc-

es as well as for preparation of the D.H.W.

It is forbidden to use this appliance for other purposes than given above (e.g. as a D.H.W.

tank), except of the tanks with a built-in D.H.W. tank. Producer takes no responsibility for

damages caused by unsuitable or incorrect usage.

Before starting the work on device or its maintenance, disconnect the electrical power inlet. If

there are any marks of fault on the appliance, stop the operation and call a service technician.

2. DESCRIPTION OF DEVICE

The tanks serve for accumulation and subsequent distribution of the heat energy from solid fuel boil-

ers, heat pumps, electric boilers, etc. The accumulation tanks ATTACK AS, HRS, TUVS and SS are acces-

sorized with an extra exchanger for a heat source with separated circuit (e.g. for solar system). The accu-

mulation tanks ATTACK HR, HRS, TUV, TUVS are equipped with a built-in system for D.H.W. preparation.

ACCUMULATION TANKS

2.1. TYPES

The AK and AS line of the accumulation tanks with the volume up to 5.000 l and option to install

the electrical heating body.

The HR and HRS line of the accumulation tanks with the volume up to 2.000 l and a built-in

D.H.W. tank and option to install the electrical heating body.

The TUV and TUVS line of the accumulation tanks with the volume up to 2.000 l, a built-in instanta-

neous D.H.W. warming through a copper exchanger and option to install the electrical heating body.

The S and SS is a line of a stratiﬁed storage tanks with the volume up to 2.000 l and option to

install the electrical heating body.

2.2. THERMAL INSULATION

The accumulation tanks are supplied with 100 mm wide soft insulation made of polyester ﬁbers

with leatherette cover.

2.3. SPECIFICATION

Max. operating pressure in the accumulation tank: 3 bar

Max. operating temperature in the accumulation tank: 95 °C

Operating pressure in a solar exchanger: 9 bar

Max. operating pressure in the D.H.W. tank: 6 bar

3. TECHNICAL DATA AND DIMENSIONS

Accumulation tanks ATTACK AK, AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 – 5

ccumulation tanks

ATTACK HR, HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page

6 – 7

Accumulation tanks ATTACK TUV, TUVS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8 – 9

Stratiﬁed accumulation tanks ATTACK S, SS . . . . . . . . . . . . . . . . . . . . . . . . . page 10 – 11

1 ½"

1 ½" 1 ½"

90°

45° 45°

ATTACK AK ATTACK AS

ACCUMULATION TANKS ATTACK AK, AS

ACCUMULATION TANKS

DESCRIPTION

The accumulation tanks ATTACK AK, AS made from the quality steel serve for ac-

cumulation and subsequent distribution of the heat energy from the biomass boiler

(e.g. SLX, DPX, DP, PELLET 30 AUTOMATIC Plus, WOOD&PELLET). The ATTACK AS

model is accessorized with an extra exchanger to be connected to the solar system.

ATTACK AK: 9× socket G 1 ½", 4× socket G ½"

ATTACK AS: 9× socket G 1 ½", 4× socket G ½", 2× socket G 1" – solar circuit

KEY FOR THE ACCUMULATION TANKS

1 – Flow connection – boiler . . . . . . . . . . . . . 1 ½"

2 – Freely disposable . . . . . . . . . . . . . . . . . . 1 ½"

3 – Freely disposable . . . . . . . . . . . . . . . . . . 1 ½"

4 – Return connection – heating circuit . . . . . . 1 ½"

5 – Flow connection – heating circuit (radiators) . 1 ½"

6 – Flow connection – heating circuit (ﬂoor) . . . 1 ½"

7 – Return connection – gas, oil and pellet boiler . . 1 ½"

8 – Return connection – wood boiler . . . . . . . 1 ½"

9 – Sensor of solar system or heating . . . . . . . . ½"

AS – Flow connection of solar system . . . . . . . . 1"

RS – Return connection of solar system . . . . . . . 1"

D1 – Diameter without insulation

D2 – Diameter with insulation

TECHNICAL PARAMETERS

Tank Solar

exchanger Tank

Type

Energy eﬃciency class

Position 1–5

Position 2–6

Position 3–7

Position 4–8

Position RS

Position AS

L – max. length of the electric

heating body

∅ D1 – Diameter without

insulation

∅ D2 – Diameter with insula-

tion of 100 mm

Height

Height with insulation of

100 mm

R – Slope dimension without

insulation

Max. operating pressure (bar)

Static loss (W)

Max. operating temperature (°C)

Area of exchanger (m²)

Volume of exchanger (l)

Max. operating pressure (bar)

Volume (l)

Weight (kg)

AK200K C 925 705 455 205 - - 550 500 700 1 140 1 190 1 157 3 65 95 - - - 204 46

AK300K C 1 110 790 460 210 - - 600 550 750 1 350 1 400 1 368 3 78 95 - - - 289 60

AK400K C 1 120 815 515 210 - - 700 650 850 1 380 1 430 1 402 3 87 95 - - - 405 73

AK500K C 1 405 1 013 621 230 - - 700 650 850 1 660 1 710 1 678 3 94 95 - - - 488 81

AK800K - 1 545 1 135 725 315 - - 840 790 990 1 840 1 890 1 864 3 108 95 - - - 732 109

AK1000K - 1 735 1 255 775 295 - - 840 790 990 2 030 2 080 2 052 3 127 95 - - - 915 118

AK1500K - 1 755 1 345 820 375 - - 1 050 1 000 1 200 2 095 2 145 2 142 3 162 95 - - - 1 449 201

AK2000K - 1 955 1 409 862 315 - - 1 150 1 100 1 300 2 310 2 360 2 353 3 189 95 - - - 1 980 235

AK2500K - 2 005 1 465 915 375 - - 1 250 1 200 1 400 2 387 2 437 2 438 3 - 95 - - - 2 435 271

AK3000K - 2 205 1 600 985 375 - - 1 300 1 250 1 450 2 596 2 646 2 643 3 - 95 - - - 2 915 363

AK4000K - 2 385 1 730 1 065 405 - - 1 450 1 400 1 600 2 819 2 869 2 872 3 - 95 - - - 3 819 475

AK5000K - 2 285 1 680 1 065 455 - - 1 650 1 600 1 800 2 770 2 820 2 845 3 - 95 - - - 4 940 578

AS200K C 925 705 455 205 205 545 550 500 700 1 140 1 190 1 157 3 64 95 0,9 6 10 198 63

AS300K C 1 110 790 460 210 210 610 600 550 750 1 350 1 400 1 368 3 77 95 1,2 7,9 10 283 83

AS400K C 1 120 815 515 210 210 610 700 650 850 1 380 1 430 1 402 3 84 95 1,5 10 10 388 103

AS500K C 1 405 1 013 621 230 230 710 700 650 850 1 660 1 710 1 678 3 92 95 1,8 11,9 10 474 118

AS800K - 1 545 1 135 725 315 315 725 840 790 990 1 840 1 890 1 864 3 105 95 2,4 15,9 10 713 157

AS1000K - 1 735 1 255 775 295 295 860 840 790 990 2 030 2 080 2 052 3 121 95 3 19,8 10 891 172

AS1500K - 1 755 1 345 820 375 375 895 1 050 1 000 1 200 2 095 2 145 2 142 3 161 95 3,6 23,7 10 1 420 265

AS2000K - 1 955 1 409 862 315 315 843 1 150 1 100 1 300 2 310 2 360 2 353 3 188 95 4,2 23,7 10 1 960 296

AS2500K - 2 005 1 465 915 375 375 1 095 1 250 1 200 1 400 2 387 2 437 2 438 3 - 95 4,2 27,7 10 2 410 345

AS3000K - 2 205 1 600 985 375 375 1 095 1 300 1 250 1 450 2 596 2 646 2 643 3 - 95 4,2 27,7 10 2 890 446

AS4000K - 2 385 1 730 1 065 405 405 1 125 1 450 1 400 1 600 2 819 2 869 2 872 3 - 95 5 33 10 3 779 568

AS5000K - 2 285 1 680 1 065 455 455 1 175 1 650 1 600 1 800 2 770 2 820 2 845 3 - 95 6 39,6 10 4 880 687

3EL EL

14°

∅

100

28°

17°

28°

ACCUMULATION TANKS ATTACK HR, HRS

ATTACK HRSATTACK HR

ACCUMULATION TANKS

DESCRIPTION

The accumulation tanks ATTACK HR, HRS are made from the quality steel

and serve for accumulation of the heating water as well as for preparation of

the D.H.W. by an internal enameled exchanger. The ATTACK HRS model is

accessorized with an extra exchanger to be connected to the solar system.

Tanks of this type have a built-in magnesium anode in the D.H.W. tank

to increase resistance against corrosion. The manual deaeration valve is in-

stalled in the upper part.

ATTACK HR: 9× socket G 1 ½", 6× socket G ½"

ATTACK HRS: 9× socket G 1 ½", 6× socket G ½", 2× socket G 1" – solar circuit

KEY FOR THE ACCUMULATION TANKS

1 – Flow connection – boiler . . . . . . . . . . . . . 1 ½"

2 – Freely disposable . . . . . . . . . . . . . . . . . . 1 ½"

3 – Electrical heating coil (EL) . . . . . . . . . . . . 1 ½"

4 – Freely disposable . . . . . . . . . . . . . . . . . . 1 ½"

5 – Return connection – heating circuit . . . . . . 1 ½"

6 – Flow connection – heating circuit (radiators) 1 ½"

7 – Flow connection – heating circuit (ﬂoor) . . . 1 ½"

8 – Return connection – gas, oil and pellet boiler 1 ½"

9 – Return connection – wood boiler . . . . . . . 1 ½"

10 – Sensor of solar system or heating . . . . . . . ½"

AS – Flow connection of solar system . . . . . . . . 1"

RS – Return connection of solar system . . . . . . . 1"

D1 – Diameter without insulation

D2 – Diameter with insulation

CN – Pump of the circulation tank . . . . . . . . . . ¾"

AF – Cold drinking water . . . . . . . . . . . . . . . . ¾"

AC – Hot drinking water . . . . . . . . . . . . . . . . . ¾"

MA – Magnesium anode . . . . . . . . . . . . . . . . . –

TECHNICAL PARAMETERS

Tank

Solar

exchanger

Internal

tank Tank

Type

Position 1–6

Position 2–7

Position 3

L-max. length of the el. heating

body

Position 4–8

Position 5–9

Position RS

Position AS

∅ D1 – Diameter without

insulation

∅ D2 – Diameter with insula-

tion of 100 mm

Height

Height with insulation of

100 mm

R – Slope dimension without

insulation

Max. operating temperature (°C)

Static loss (W)

Max. operating pressure (bar)

Area of exchanger (m²)

Volume of exchanger (l)

Max. operating pressure (bar)

Volume (l)

Max. operating temperature (°C)

Max. operating pressure (bar)

Volume (l)

Weight (kg)

HR600K

1 515 1 123 794 650 684 245 - - 700 900 1 754 1 854 1 841 95 99 3 - - - 160 95 6 445 157

HR800K

1 545 1 135 846 735 725 315 - - 790 990 1 806 1 906 1 898 95 105 3 - - - 160 95 6 553 157

HR1000K

1 735 1 255 1 036 735 775 295 - - 790 990 1 996 2 096 2 081 95 121 3 - - - 160 95 6 731 172

HR1250K

1 655 1 175 988 880 695 285 - - 950 1 150 1 948 2 048 2 064 95 142 3 - - - 160 95 6 1 079 172

HR1500K

1 755 1 345 1 072 920 820 375 - - 1 000 1 200 2 032 2 132 2 160 95 161 3 - - - 160 95 6 1 260 265

HR2000K

1 955 1 408 1 314 1 000 862 315 - - 1 100 1 300 2 274 2 374 2 390 95 188 3 - - - 160 95 6 1 800 296

HRS600K

1 515 1 123 794 650 684 245 245 725 700 900 1 754 1 854 1 841 95 99 3 1,8 11,9 10 160 95 6 445 157

HRS800K

1 545 1 135 846 735 725 315 315 725 790 990 1 806 1 906 1 898 95 105 3 2,4 15,9 10 160 95 6 553 157

HRS1000K

1 735 1 255 1 036 735 775 295 295 860 790 990 1 996 2 096 2 081 95 121 3 3 19,8 10 160 95 6 731 172

HRS1250K

1 655 1 175 988 880 695 285 285 850 950 1 150 1 948 2 048 2 064 95 142 3 3 19,8 10 160 95 6 1 079 172

HRS1500K

1 755 1 345 1 072 920 820 375 375 895 1 000 1 200 2 032 2 132 2 160 95 161 3 3,6 19,8 10 160 95 6 1 260 265

HRS2000K

1 955 1 408 1 314 1 000 862 315 315 843 1 100 1 300 2 274 2 374 2 390 95 188 3 4,2 23,7 10 160 95 6 1 800 296

90°

12°

½"

ACCUMULATION TANKS ATTACK TUV, TUVS

TECHNICAL PARAMETERS OF THE D.H.W. EXCHANGER

Material Stainless steel

Heated area 3,9 m2

Volume 13 l

Connection 3/4"

Max. operating pressure 10 bar

ATTACK TUV ATTACK TUVS

ACCUMULATION TANKS

DESCRIPTION

The accumulation tanks ATTACK TUV, TUVS are made from a quality steel

and they serve for accumulation of the heating water as well as for the D.H.W.

preparation in a water coil. The ATTACK TUVS model is accessorized with an

extra exchanger for connection to the solar system.

ATTACK TUV: 9× socket G 1 ½", 5× socket G ½", 2× socket G 1" – D.H.W.

ATTACK TUVS: 9× socket G 1 ½", 5× socket G ½", 2× socket G 1" – solar circuit,

2× socket G 1" – D.H.W.

KEY FOR THE ACCUMULATION TANKS

1 – Flow connection - boiler . . . . . . . . . . . . . 1 ½"

2 – Freely disposable . . . . . . . . . . . . . . . . . . 1 ½"

3 – Electrical heating coil (EL) . . . . . . . . . . . . 1 ½"

4 – Freely disposable . . . . . . . . . . . . . . . . . . 1 ½"

5 – Return connection – heating circuit . . . . . . 1 ½"

6 – Flow connection – heating circuit (radiators) . 1 ½"

7 – Flow connection – heating circuit (ﬂoor) . . . 1 ½"

8 – Return connection – gas, oil or pellet boiler . 1 ½"

9 – Return connection – wood boiler . . . . . . . 1 ½"

10 – Sensor of solar system or heating . . . . . . . ½"

AS – Flow connection of solar system . . . . . . . . 1"

RS – Return connection of solar system . . . . . . . 1"

D1 – Diameter without insulation

D2 – Diameter with insulation

AF – Cold drinking water . . . . . . . . . . . . . . . . 1"

AC – Domestic hot water . . . . . . . . . . . . . . . . 1"

TECHNICAL PARAMETERS

Tank Solar

exchanger Tank

Type

Energy eﬃciency class

Position 1–6

Position 2–7

Position 3 (EL)

L – max. length of the

electric heating body

Position 4–8

Position 5–9

Position RS

Position AS

∅ D1 – Diameter without

insulation

∅ D2 – Diameter with

insulation

Height

R – Slope dimension

without insulation

Mini. installation height

Max. operating tempera-

ture (°C)

Static loss (W)

Max. operating pressure

(bar)

Area of exchanger (m²)

Volume of exchanger (l)

Max. operating pressure

(bar)

Max. operatind tempera-

ture (°C)

Area of D.H.W. exchanger

(m²)

Volume (l)

Weight (kg)

TUV500K C

1 405 1 013 771 600 621 230 - - 650 850 1 631 1 717 1 831 95

3 - - - - 4,54 474 157

TUV600K -

1 515 1 123 794 650 684 245 - - 700 900 1 754 1 841 1 954 95

3 - - - - 4,54 605 157

TUV800K -

1 545 1 135 846 735 725 315 - - 790 990 1 806 1 898 2 006 95

105

3 - - - - 4,54 713 157

TUV1000K -

1 735 1 255 1 036 735 775 295 - - 790 990 1 996 2 081 2 196 95

121

3 - - - - 4,54 891 172

TUV1250K -

1 655 1 175 988 880 695 285 - - 950 1 150 1 948 2 064 2 148 95

142

3 - - - - 4,54 1 239 172

TUV1500K -

1 755 1 345 1 072 920 820 375 - - 1 000 1 200 2 032 2 160 2 232 95

161

3 - - - - 4,54 1 420 265

TUV2000K -

1 955 1 408 1 314 1 000 862 315 - - 1 100 1 300 2 274 2 390 2 474 95

188

3 - - - - 4,54 1 960 296

TUVS500K C

1 405 1 013 771 600 621 230 230 710 650 850 1 631 1 717 1 831 95

3 1,8 11,9 10 110 4,54 474 157

TUVS600K -

1 515 1 123 794 650 684 245 245 725 700 900 1 754 1 841 1 954 95

3 1,8 11,9 10 110 4,54 605 157

TUVS800K -

1 545 1 135 846 735 725 315 315 725 790 990 1 806 1 898 2 006 95

105

3 2,4 15,9 10 110 4,54 713 157

TUVS1000K -

1 735 1 255 1 036 735 775 295 295 860 790 990 1 996 2 081 2 196 95

121

3 3 19,8 10 110 4,54 891 172

TUVS1250K -

1 655 1 175 988 880 695 285 285 850 950 1 150 1 948 2 064 2 148 95

142

3 3 19,8 10 110 4,54 1 239 172

TUVS1500K -

1 755 1 345 1 072 920 820 375 375 895 1 000 1 200 2 032 2 160 2 232 95

161

3 3,6 19,8 10 110 4,54 1 420 265

TUVS2000K -

1 955 1 408 1 314 1 000 862 315 315 843 1 100 1 300 2 274 2 390 2 474 95

188

3 4,2 23,7 10 110 4,54 1 960 296

1 ½"

1 ½" 1 ½"

90°

10°

45° 45°

ATTACK S ATTACK SS

STRATIFIED STORAGE TANKS ATTACK S, SS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ATTACK Boiler Handbücher

ATTACK

ATTACK PZO 80 Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

Applimo

Applimo Edel AIR Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

A.O. Smith

A.O. Smith Gphe 50 Bedienungsanleitung

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung