ATV CZ7T2812UWCI Bedienungsanleitung

사 용 설 명 서

사 용 설 명 서사 용 설 명 서사 용 설 명 서

Operating Manual

USER'S INSTRUCTIONS

Vandal-proof Dome

High Resolution

DNR Day/Night

Color Camera

Rev.1

- 2 -

사 용 설 명 서

In USA and Canada, Use Class 2 Power Supply Only

USER'S MANUAL

- 3 -

사 용 설 명 서

IMPORTANT SAFETY INSTRUCTIONS

1) Read the .snoitcurtsnies

2) Keep these instruct .snoi

3) Heed .sgninrawlla

4) Follow all instructions.

5) Do not use this apparatus nea .retawr

6) Clean only with dry c .htol

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet. Consult an electrician for replacement of the obsolute outlet.

13 U)nplug this apparatus during lightning storms or when unused for long periods of time.

14 otgnicivresllarefeR) qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been moisture, does not operate normally, or has been dropped.

10)Protect the power cord from being walked on or pinched particularly at plugs, conveniance

repeptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

11)

12)

USER'S MANUAL

- 4 -

사 용 설 명 서USER'S MANUAL

Contents

Camera Features

Installing & Adjusting

Dimension & Specification

OSD Control Button

On Screen Dispaly (OSD) Menu

Menu Set Up

Lens

Exposure

White Bal

Day&Night

3DNR

Special

Adjust

Reset

Exit

Trouble Shooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- 5 -

사 용 설 명 서

Camera Features

●

700TV Lines

The combination of a 960H CCD image sensor and New DSP provides an excellent resolution

of 700TV Lines.

●

3D-DNR

Smart 3DNR prevents the image blurring of moving object and activates only if moving objects

are appearing on the scene.

●

DIS(Digital Image Stabilizer) Function

Stabilizes the picture and increases clarity when small amounts of motion due to wind or

climate change may cause the picture to appear out of focus.

●

Smart-IR

The "New DSP" provides a vivid image in darkness due to the control of the IR illumination

sensitivity. The image is never saturated because of close objects.

●

Sens-Up

Despite a limited & low light condition, Sens-Up - Max. x256 helps the viewer to get visible

and clear images.

●

Defog

The "Defog" function improves image clarity in poor conditions such as fog, smoke, rain or

snow.

●

OSD Menu

The On-Screen-Display Menu provides easy control and setting of all functions available in the

set-up of the camera.

USER'S MANUAL

- 6 -

사 용 설 명 서

Þ\GGGG[GOPt[GtGGG[GOP

Installing & Components

- Afx the mounting template to the mounting surface.

- Using the L-wrench provied, remove 4 screws and separate the dome cover.

- Drill holes in the celling by matching the holes in the case bed. Fix the case bed on the ceilling by

using tapping screws.

- Pass the power and video cable through the access hole and connect to the camera before mounting

the camera to the base.

- Position and focus the camera to a desired direction and assemble the dome cover to the mounting

base with machine screws using the L wrench provided.

● CAMERA 1piece ● Instruction Manual 1piece ● Mounting Template 1piece

● Service Monitor Cable 1pieces ● Tapping Screw 4pieces ● L-wrench 1piece

1. Installation

2. Components

USER'S MANUAL

- 7 -

사 용 설 명 서

Dimension Connection

Sensor type

Effective pixels

Total pixels

Resolution

Scanning system

Min. illumination

Video Output

S/N Ratio

AGC

Sens-UP

Backlight Compensation

D-WDR

Motion Detection

Privacy Masking

DIS(Digital Image Stabilizer)

Day & Night

White Balance

3DNR(2D or 3D)

Mirror

D-ZOOM

SMART DZOOM

DEFOG

Power Supply

Power Consumption

Lens

Storage Temperature

Operating Temperature

Dimension(W x H x D)

Weight

1/3" Sony 960H CCD

976 (H) X 494 (V) approx. 480K pixels (NTSC)

976 (H) X 582 (V) approx. 570K pixels (PAL)

1020 (H) X 508 (V) approx. 520K pixels (NTSC)

1020 (H) X 596 (V) approx. 610K pixels (PAL)

700TV Lines

2:1 Interlace

0Lux(IR LED ON)

1.0Vp-p Composite. 75 Ohms

52dB

Low / Middle / High

OFF/AUTO (X2 ~ X256)

OFF/BLC/HLC

OFF/INDOOR/OUTDOOR

4 Zone

8 Zone

OFF/ON

Auto(AGC)/Day/Night/Ext

ATW/AWB/AWC->SET/Manual(1,800K ~ 11,000K)

1 ~ 200 Level Selectable

H-Rev / V-Rev / ROTATE/PIP

X32

OFF/ON

OFF/MANUAL/AUTO

DC 12V/AC 24V Dual Voltage

Dome : DC12V 220mA, HEATER ON : 400mA / AC24V 105mA, HEATER ON : 170mA

IR LED Dome : IR LED ON : DC12V 650mA, HEATER ON : 860mA / AC24V 270mA, HEATER ON : 650mA

DC Auto Iris Varifocal Lens(2.8mm-12mm)

IR Distance Max 30M(IR LED 33pieces)

-35º ~ +60º Deg C. RH95% MAX.

-20º ~ +60º Deg C. RH95% MAX.

146mm(W) * 105mm(H) * 146mm(D)

1500g

Dimension & Specication

1. Dimension & Connection

2. Specication

USER'S MANUAL

- 8 -

사 용 설 명 서

TEMP.

SENSOR

HEATE R

HEATER

SETUP

VIDEO

IR LED

VOLUME

FRONT

DOWN

LEFT

OSD Control Button

▲ Up switch : Moves the cursor upwards. Use this button to select an item or adjust the parameters.

▼ Down switch : Moves the cursor downwards. Use this button to select an item or adjust the

parameters.

◀ Left switch : Moves the cursor to the left. Use this button to select or adjust the parameters of the

selected item. The parameter changes each time this button is pressed.

▶ Right switch : Moves the cursor to the right. Use this button to select or adjust the parameters of

the selectd item. The parameter changes each time this button is pressed.

◎ Set switch (Push) : Executes selections and displays a submenu for an item with the mark.

1. The OSD Button is a mini-joy stick control switch used to navigate the OSD Menu.

USER'S MANUAL

- 9 -

사 용 설 명 서

On Screen Display (OSD) Menu

SETUP Menu

On Screen Display (OSD) Menu

Camera functions and settings can be adjusted or changed by activating the OSD menu.

When the OSD menu is activated text will display on the monitor. The user can then move the cursor to

the desired function to change the setting.

LENS

EXPOSURE

WHITE BALANCE

DAY/NIGHT

3DNR

SPECIAL

ADJUST

RESET

EXIT

● DC

● SHUTTER

● BLC

● ATW

● MANUAL

● COLOR

● EXT

● OFF

● CAM TITLE

● PRIVACY

● RETURN

● SHARPNESS

● FACTORY

● MANUAL

● AGC

● D-WDR

● AWB

● B/W

● ON

● D-EFFECT

● DEFECT

● MONITOR

● RETURN

● SENS-UP

● RETURN

● AWC-->SET

● AUTO

● MOTION

● DEFOG

USER'S MANUAL

- 10 -

사 용 설 명 서

USER'S MANUAL

Menu setting can be selected by the OSD Control switch inside the camera.

1. Press the set switch.

* The Set Up menu will be displayed on the monitor.

2. Move and select the required function using the Up and Down switch.

* Move the triangular indicator Up or Down to select the desired feature by moving

the switch Up or Down.

Menu Set Up

SETUP

LENS

EXPOSURE

WHITE BAL

DAY&NIGHT

3DNR

SPECIAL

ADJUST

RESET

EXIT

LENS

EXPOSURE

WHITE BAL

DAY&NIGHT

3DNR

SPECIAL

ADJUST

RESET

EXIT

DCAUTO

ATW

COLOR

DCAUTO

ATW

COLOR

Inhaltsverzeichnis

Andere ATV Sicherheitskamera Handbücher

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung