AUDAC ATEO M Series Bedienungsanleitung

User manual

ATEOxM

audac.eu

ATEOxM- User manual02

ADDITIONAL INFORMATION

This manual is put together with much care, and is as complete as could be on the publication date.

However, updates on the speciﬁcations, functionality or software may have occurred since publication. To

obtain the latest version of both manual and software, please visit the Audac website @ www.audac.eu.

ATEOxM - User manual 03

Tableof contents

Introduction 04

Bright sound, effortless installation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 04

Precautions 05

Chapter 1 06

CleverMount+™ � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 06

Chapter 2 07

Installing ATEOxM � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 07

Chapter 3 010

Positioning ATEOxM � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 010

Technical speciﬁcations 011

ATEOxM- User manual04

Introduction

The ATEOxM series are extraordinary loudspeakers especially designed for ﬁxed installation in- & outdoor

applications, ranging from modern residential applications to the most demanding designer applications

in environments such as retail stores, pubs, restaurants or even clubs.

The ATEOxM ensures a true-to-nature, high-ﬁdelity reproduction of music and speech, whilst maintaining

an ultra-ﬂat frequency response. It features a stunningly designed and elegant-looking weatherproof ABS

housing which is ﬁtted with high-quality components. What makes this loudspeaker range so exceptional

is the specially designed mounting bracket using the weatherproof CleverMount+™ technology, making

the loudspeaker cabinet ﬂow together with the mounting bracket providing great ease for installing the

loudspeaker in one good-looking entity. This design loudspeaker forms the ideal solution for ﬁxed-install

indoor and outdoor applications.

With the improved CleverMount+™ innovation, mounting and connection of the loudspeaker happens

in seconds after attaching the wall plate to the desired location. During installation, the wires can easily

be connected to the integrated WAGO connectors. For ease of installation & modiﬁcation, the ATEOxM

loudspeakers come with an external power tap selection switch located on the rear of the speaker. Like this,

it’s really child’s play to install a large number of loudspeakers in no time.

All ATEOxM series speakers are available in black (/B) or white (/W).

Bright sound, effortless installation

ATEOxM - User manual 05

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY

ALWAYS HANDLE THIS UNIT WITH CARE

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS

DO NOT STICK ANY OBJECTS THROUGH THE VENTILATION OPENINGS.

DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE HEAT

PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK

ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER

UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME

USE THE APPARATUS ONLY IN MODERATE CLIMATES

CAUTION  SERVICING

This product contains no user serviceable parts. Refer all servicing to qualiﬁed service

personnel. Do not perform any servicing (unless you are qualiﬁed to)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and further relevant speciﬁcations

described in following directives: 2014/30/EU (EMC) & 2014/35/EU (LVD).

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT WEEE

The WEEE marking indicates that this product should not be disposed with regular

household waste at the end of its life cycle. This regulation is created to prevent any

possible harm to the environment or human health.

This product is developed and manufactured with high quality materials and components

which can be recycled and/or reused. Please dispose this product at your local collection

point or recycling centre for electrical and electronic waste. This will make sure that it will be

recycled in an environmentally friendly manner, and will help to protect the environment

in which we all live.

ATEOxM- User manual06

Chapter 1

1) Wall mounting holes

The wall mount has to be ﬁxed by four screws in a quadrangular shape. The used fasteners should be chosen

depending to the mounting surface (brick, concrete, wood, ... )

2) Speaker attachment points and spring-loaded locking

ATEOxM has a hook and a latch connection on it and those connection should be placed to attachment

points on CleverMount+™ mounting system. When the mounting is done correctly, a clicking sound will be

heard. There is also a spring-loaded locking mechanism to lock the attached speaker or to release it from

the wall mount.

3) WAGO connectors and contact blades

CleverMount+™ mounting technology has two pieces of WAGO terminal connectors on it for connection

and daisy chaining. One terminal port on each connector is connected to a contact blade for speaker and

mounting system mating. Polarity of each terminal is indicated on CleverMount+™ mounting system.

Thanks to the patented CleverMount+™ mounting technology these loudspeakers have the advantage of

making the speaker cabinet ﬂow together with the mounting bracket providing a great ease for installing

the loudspeaker in one good-looking entity. A safe installation of the loudspeaker is acquired thanks to the

separate bracket base.

Mounting brackets come with ofﬁcial WAGO connectors for the perfect high-quality and reliable electrical

installation. Great installer convenience is provided with the WAGO spring cage terminals, no additional

tools needed.

CleverMount+™

ATEOxM - User manual 07

Chapter 2

Installing ATEOxM

With the improved CleverMount+™ innovation, mounting and connection of the loudspeaker happens

in seconds after attaching the wall plate to the desired location. During installation, the wires can easily

be connected to the integrated WAGO connectors. For ease of installation & power conﬁguration, the

ATEOxM loudspeakers come with an external power tap selection rotary switch located on the rear of the

speaker. Makes it easy to install a large number of loudspeakers in no time.

1) Install CleverMount+™ mounting system

The ﬁrst step is mounting the supplied wall mount to the desired location on the wall. The wall mount has

to be ﬁxed by four screws in a quadrangular shape. Distance between mounting holes are shown below.The

used fasteners should be chosen depending to the mounting surface (brick, concrete, wood, ... )

ATEO4M ATEO6M

2) Make the connections

After the wall mount is installed, the connections can be made. The wires coming from the ampliﬁer

shall be connected to the corresponding terminals of the WAGO terminal block connector. The positive

or the signal output of the ampliﬁer should be connected to the ﬁrst corresponding positive terminal of

the WAGO connector, while the negative or the common should be connected to the ﬁrst corresponding

negative terminal of the WAGO connector. Positive and negative connection points are clearly indicated

on CleverMount+™. Secondary terminal block connection points can be used to wire the next ATEOxM.

ATEOxM- User manual08

3) Set the external power tap selection on ATEOxM (not for ATEOxDM)

The ATEOxM can be connected in low impedance (8 Ω) or high impedance (70/100V) systems. For use in

high impedance (70/100V) systems, various power tappings can be selected. Depending on whether the

speaker will be used in LO-Z or 70/100V applications, the ATEOxM has an integrated external power tap

selector hidden on the rear which is protected by a plastic cap. On the otherhand, the ATEOxDM can be

connected only in low impedance ( 16 Ω) and there is no rotary switch on it.

When using in constant voltage 70V/100V systems, the power taps can be adjusted in 4 steps of impedance

through selection of the correct connection terminals indicated with A, B, C & D. Each position corresponds

with a speciﬁc impedance / power setting indicated on a label on the wall plate and in the table below.

Rotary switch ATEO4M ATEO6M

100V 70V Imp. 100V 70V Imp.

LO-Z 8Ω (ATEO4M) 8Ω (ATEO6M)

Not used

24W

208Ω

Not Used

50W 100Ω

B24W 12W 417Ω 50W 25W 200Ω

C12W 6W 833Ω 25W 12.5W 400Ω

D 6W 3W 1667Ω 12.5W

6,25W

800Ω

ATEOxM - User manual 09

4) Mount ATEOxM on CleverMount+™

CleverMount+™ mounting system provides great ease of installing the ATEOxM. Secure and safe installation

of the speaker is ensured thanks to the separate bracket base. Installation is described below in 5 steps.

Step 1

ATEOxM has two connection latches on it and those

connection latches should be placed to attachment points

on CleverMount+™ mounting system.

Step 2

Carefully place the top hook to its place on the mounting

system and slowly push the ATEOxM and be sure connection

blades and the bottom latch is inserted.

Step 3

When the mounting is done correctly, connecting blades of

mounting system will be mated with ATEOxM and a clicking

sound will be heard.

Step 4

There is a spring-loaded locking mechanism on the bottom

to lock the attached speaker or to release it from the wall

mount. The ATEOxM can be taken out of its place by pushing

the spring-loaded locking bolt when it is not locked.

Step 5

Tighten the spring-loaded locking bolt placed at the bottom

with the Allen key to ensure secure and safe permanent

installation.

ATEOxM- User manual010

Chapter 3

The last step in the mounting procedure of the speaker is pointing it in the desired direction by untightening

the Allen-key bolt located in the centre of the speaker grill. The AUDAC logo comes separately to be placed

in the centre of the speaker grill after the positioning of the ATEOxM. After this bolt is untightened by a few

turns, the speaker will be in a free state, making it possible to move it into the left (30°), right (30°), up (5°)

and down (30°) position. It can also be rotated from vertical to horizontal position (rotate counter-clockwise).

Once the speaker is placed in position and pointing into the right direction, it can be locked by tightening

the allen-key bolt. Subsequently the logo should be placed again in front of the allen-key bolt.

The ATEOxM has a protection class of IP66 thanks to the fully sealed cabinet and hydrophobic cloth behind

the grill. Position the ATEOxM at a minimum down tilt of 5° for outdoor installations. Standing water is

avoided trough this installation.

Positioning ATEOxM

Dieses Handbuch passt für folgende Modelle

Andere AUDAC Sprecher Handbücher

AUDAC

AUDAC CELO2 Leitfaden

AUDAC

AUDAC VEXO1A Series Bedienungsanleitung

AUDAC

AUDAC WX Series Leitfaden

AUDAC

AUDAC SPRING-FIT CENA506 Bedienungsanleitung

AUDAC

AUDAC BASO Series Leitfaden

AUDAC

AUDAC CS85 Montage- und Bedienungsanleitung

AUDAC

AUDAC CELO6 Leitfaden

AUDAC

AUDAC ARES5A Bedienungsanleitung

AUDAC

AUDAC CS85 Montage- und Bedienungsanleitung

AUDAC

AUDAC VEXO 8 Leitfaden

AUDAC

AUDAC Ateo 6 Leitfaden

AUDAC

AUDAC CS55 Montage- und Bedienungsanleitung

AUDAC

AUDAC CALI Series Bedienungsanleitung

AUDAC

AUDAC VEXO110 Bedienungsanleitung

AUDAC

AUDAC Outdoor Series Leitfaden

AUDAC

AUDAC MERO5 Leitfaden

AUDAC

AUDAC XENO 8 Leitfaden

AUDAC

AUDAC CS75 Bedienungsanleitung

AUDAC

AUDAC AWP06 Montage- und Bedienungsanleitung

AUDAC

AUDAC CS75B Bedienungsanleitung

AUDAC

AUDAC MTX Bedienungsanleitung

AUDAC

AUDAC SPRING-FIT CENA812 Bedienungsanleitung

AUDAC

AUDAC SPRING-FIT CENA510D Bedienungsanleitung

AUDAC

AUDAC IME01 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung