AUDAC AWP06 Montage- und Bedienungsanleitung
PROFESSIONAL AUDIO EQUIPMENT
In-wall Ceiling Speaker AWP06
UserManual&InstallationGuide
CeilingSpeaker
AWP06
AUDAC
A U D A C P R O F E S S I O N A L A U D I O E Q U I P M E N T
User Manual & Installation Guide
AUDAC
http://www.audac.eu
info@audac.eu
1
INTRODUCTION...............................................................................................................................................................................................................3
WARNING-CAUTION.......................................................................................................................................................................................................4
INSTALLATION ...............................................................................................................................................................................................................5
CONNECTIONS.................................................................................................................................................................................................................5
ADDITIONAL INFORMATION.......................................................................................................................................................................................6
TECHNICAL SPECIFICATIONS ..............................................................................................................................................................................6
Index
2
Introduction
With the AWP06 is you have purchased a state-of-the-art ceiling speaker. The speaker was
specially designed to provide high-quality sound in a variety of in- and outdoor
applications and damp locations. Its wide, smooth frequency response and high efficiency
ensure high-fidelity music reproduction and intelligible speech at very low distortion. The
housing is made of strong, white ABS material and is waterproof. The AWP06 can be used
in a 100V PA system with tapping for 6 W or 3 W or in low impedance systems 8 Ohm/6
W. The AWP06 ceiling speaker meets the IP65 standards.
3
Warning
Use only the correct amplifier output voltage and impedance, exceeding these limits
could cause fire or other failures.
Avoid explosions: do not use the speaker around gasoline, thinner or other
combustibles.
Only install the speaker in locations that can structurally support the weight of the
speaker. Not doing this may result in the speaker falling down.
Do not use any other method than specified to mount the speaker. If extreme force is
applied to the speaker, it could fall down.
Attach a safety wire to the speaker when it is mounted high above the ground. Failure
in doing so could cause the speaker to fall down for any reason.
Avoid mounting the speaker in locations exposed to constant vibrations. The
mounting points can be damaged by excessive vibration, potentially causing the
speaker to fall down.
Caution
Avoid electric shocks: switch off the amplifier power when connecting the speaker.
Avoid installing the speaker in locations exposed to solvents, acids, smoke and
heaters, as excessive exposure to these factors could result in speaker failure, fire or
electric shock.
Do not operate the speaker for an extended period of time at distorted sound. This
could cause (irreparable) damage to the speaker.
Do not stand or sit on, nor hang down from the speaker, as this may cause failure of
the speaker.
4
Installation
Make a hole with a diameter of 140 mm This is very easy when you use the carton
that is inside of the box.
Install the unit only in a ceiling made of strong material so that the mounting springs
don’t damage the ceiling. For weak ceiling panels you can use a wooden plank to the
ceiling in which you can make the mounting hole.
Connections
Cable
Be sure that you use the following polarities for your speaker cable, when using
several speakers in the same location:
Red: Negative or common
Black: Positive
The total rated input of all connected speakers may not exceed the amplifiers
output.
5
Additional information
Technical Specifications
RMS Power 6 W
Max Power 10 W
Impedance 8 Ohm
Line transformer power tappings 6 W / 1666 Ohm
3 W / 3333 Ohm
1,5 W / 6666 Ohm
Sound pressure 1W / 1m 87 dB
Sound pressure max W / 1m 95 dB
Frequency response -3 dB 100 Hz –15 kHz
IP Rating 65
Driver 4”
Dimensions ( H x Diam.) 130 x 140 mm
Built-in depth 130 x 140 mm
Cut-out measurement 125 mm
Weight 0,95 Kg
Colour White
Andere Handbücher für AWP06
1
Inhaltsverzeichnis
Andere AUDAC Sprecher Handbücher
AUDAC
AUDAC MBK523/G Bedienungsanleitung
AUDAC
AUDAC WMM630 Bedienungsanleitung
AUDAC
AUDAC VIRO5 Bedienungsanleitung
AUDAC
AUDAC MERO5 Leitfaden
AUDAC
AUDAC ATEO2S Leitfaden
AUDAC
AUDAC CELO8 Leitfaden
AUDAC
AUDAC CSE55 Montage- und Bedienungsanleitung
AUDAC
AUDAC LINO4 Leitfaden
AUDAC
AUDAC CENA706 Bedienungsanleitung
AUDAC
AUDAC KYRA24 Leitfaden
AUDAC
AUDAC WXMK2 Series Leitfaden
AUDAC
AUDAC GIAX Montage- und Bedienungsanleitung
AUDAC
AUDAC VEXO110A Bedienungsanleitung
AUDAC
AUDAC SPRING-FIT CENA506 Bedienungsanleitung
AUDAC
AUDAC SPRING-FIT CENA306 Bedienungsanleitung
AUDAC
AUDAC XENO 6 Leitfaden
AUDAC
AUDAC WS524 Bedienungsanleitung
AUDAC
AUDAC ASP20 Bedienungsanleitung
AUDAC
AUDAC HS212MK2 Leitfaden
AUDAC
AUDAC CELO2D Leitfaden
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung