AUDAC LINO4 Leitfaden

LINO4/10

User & Installation

Manual

www.audac.eu

Introduction

Column speakers

The LINO series are column speaker series designed for a wide variation of general-

purpose applications in acoustic difficult environments, ranging from speech and

announcement applications to background music systems. Typical applications are

houses of worship, auditoria, presentation rooms, public transportation hubs, … and

many more. They are solid constructed using solid aluminum materials and finished

through a rigid finely perforated front grill.

They come in two different models (LINO4 and LINO10) in terms of length and driver

count, consisting of 2” low/mid-frequency drivers with a 1” central positioned tweeter

for the high frequencies. Both models are having a specific pattern in terms of disper-

sion and throw distance. They offer solutions for uniform acoustic performance in any

type of system in reverberant venues, while reducing echo and microphone feedback to

optimizes the intelligibility of music & speech.

Mounting is done through an L-shaped bracket on top and bottom, offering optimal

flexibility for fixation and directional placement. Connections are made through multi-

tapping terminal block connector and A multi-tapping line transformer allows them to

be connected to 70/100V public address systems with various power tapping settings,

while connections in low impedance systems are also possible.

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER

THROW THEM AWAY

• ALWAYS HANDLE THIS UNIT WITH CARE

• CLEAN ONLY WITH DRY CLOTH

• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR

SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON

TOP OF THIS DEVICE

• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS

OR OTHER APPARATUS THAT PRODUCE HEAT

• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST,

HEAT, MOISTURE OR VIBRATION

• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE

MANUFACTURER.

• ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY

SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE

SPEAKER DOWN.

• DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE

SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL

DOWN

• ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.

ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

• CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF,

INFORM YOUR VENDOR IMMEDIATELY.

CAUTION

• USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER

• USE CABLES WITH CLEAR COLOR CODING INDICATING THE POLARITY AND

MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.

• ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.

EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.

AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,

THINNER OR OTHER COMBUSTIBLES

• AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING

THE LOUDSPEAKER

• DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT

DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing

to qualified service personnel. Do not perform any servicing

(unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and further

relevant specifications described in following directives: 2014/30/

EU (EMC) and 2014/35/EU (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be

disposed with regular household waste at the end of its product

life. This regulation is created to protect both the environment

and human health.

This product is developed and manufactured with high quality

materials and components which can be recycled and/or reused.

Please dispose this product to your local collection point or

recycling centre for electrical and electronic waste. This will

make to sure that it will be recycled on an environmentally friendly

manner, and will help to protect the environment in which we all

live.

Installing the LINO

Mounting bracket

Every LINO speaker comes delivered with two L-shaped brackets making it possible

to install the speaker at each location and focussing it into the desired direction. The

metal constructed L-brackets ensures a solid and secure mounting of the loudspeaker

to any possible surface or location.

The L-shaped brackets have to be fixed to the wall through

2 screws. The used fasteners are depending on the mounting

surface (brick, concrete, wood, ...) and should be chosen

accordingly.

Once the wall brackets are mounted to the installation position,

the speaker should get fixed to the brackets. This is done through

inserting both supplied bolts and tightening them. The slot shaped

holes allow vertical directional adjustments while horizontal

adjustments are possible through rotation.

Connecting the speaker

For connecting the LINO, the wires coming from the amplifier shall be connected to

the 6-pin terminal block connector on the rear of the speaker. Depending whether

the speaker will be used in a low impedance system or a constant voltage (70/100V)

system, the appropriate terminals of the connector should get connected as indicated

in the below drawing.

8 Ω

COM

When using in constant voltage 70/100V systems, the power taps can be adjusted in 4

steps of impedance through connecting the appropriate terminals of the 6-pin terminal

block connector. Each position corresponds with a specific impedance / power setting

indicated on a label attached to the speaker, and in the table below.

LINO4

LINO10

Tapping 100V 70V Imp. 100V 70V Imp

A20 W 250 Ω40 W 125 Ω

B20 W 10 W 500 Ω40 W 20 W 250 Ω

C10 W 5 W 1000 Ω20 W 10 W 500 Ω

D5 W 2.5 W 2000 Ω10 W 5 W 1000 Ω

Low-Z 8 Ω20 Ω

Additional Information

Technical specifications

LINO4 LINO10

Max Power 40 Watt 80 Watt

RMS Power 20 Watt 40 Watt

Nominal impedance 8 Ω20 Ω

Line transformer taps 250 Ω– 70V/20W 125 Ω– 70V/40W

500 Ω– 100V/20W - 70V/10W 250 Ω– 100V/40W - 70V/20W

1k Ω– 100V/10W - 70V/5W 500 Ω– 100V/20W - 70V/10W

2k Ω– 100V/5W - 70V/2.5W 1k Ω– 100V/10W - 70V/5W

Frequency response (± 3 dB) 170 Hz - 15 kHz 170 Hz - 15 kHz

Frequency range (- 10 dB) 120 Hz - 20 kHz 120 Hz - 20 kHz

Sensitivity (1W/1m) 88 dB 90 dB

Sound pressure (Max. W/1m) 101 dB 107 dB

Cross-over network Passive built-in Passive built-in

Drivers 4 x 2” + 1” HF 10 x 2” + 1” HF

Connectors 6-pin Terminal block (5.08 mm) 6-pin Terminal block (5.08 mm)

Mounting bracket Adjustable L-brackets (steel) Adjustable L-brackets (steel)

Construction Alu extrusion + end caps Alu extrusion + end caps

Front finish Fine perforated alu grill Fine perforated alu grill

Ingress protection IP3x IP3x

Operation temperature range -20°C to +50°C -20°C to +50°C

Colour White LINO4/W (RAL9003) LINO10/W (RAL9003)

Black LINO4/B (RAL9005) LINO10/B (RAL9005)

Dimensions (W x H x D) 72 x 414 x 68.3 mm 72 x 796 x 68.3 mm (excl bracket)

Weight 1.81 Kg 3.7 Kg

Packaging Carton box Carton box

Shipping weight & Volume 2.1 Kg - 0.008 Cbm 4.2 Kg - 0.014 Cbm

Accessories included 6-pin terminal block connector 6-pin terminal block connector

Adjustable L-brackets (steel) Adjustable L-brackets (steel)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AUDAC Sprecher Handbücher

AUDAC

AUDAC CALI Series Bedienungsanleitung

AUDAC

AUDAC HS212MK2 Leitfaden

AUDAC

AUDAC AXIR Montage- und Bedienungsanleitung

AUDAC

AUDAC CS85 Montage- und Bedienungsanleitung

AUDAC

AUDAC KYRA Series Leitfaden

AUDAC

AUDAC WX802/W Montage- und Bedienungsanleitung

AUDAC

AUDAC WX Series Leitfaden

AUDAC

AUDAC SPRING-FIT CENA Series Bedienungsanleitung

AUDAC

AUDAC Outdoor Series Leitfaden

AUDAC

AUDAC SPRING-FIT CENA506 Bedienungsanleitung

AUDAC

AUDAC VEXO110A Bedienungsanleitung

AUDAC

AUDAC ARES5A Bedienungsanleitung

AUDAC

AUDAC WX802 Montage- und Bedienungsanleitung

AUDAC

AUDAC CELO5 Leitfaden

AUDAC

AUDAC CS55 Montage- und Bedienungsanleitung

AUDAC

AUDAC WS500 Bedienungsanleitung

AUDAC

AUDAC VIRO5 Bedienungsanleitung

AUDAC

AUDAC HS208MK2 Leitfaden

AUDAC

AUDAC WX502B Montage- und Bedienungsanleitung

AUDAC

AUDAC ATEO4 Bedienungsanleitung

AUDAC

AUDAC MERO5 Leitfaden

AUDAC

AUDAC KYRA24 Leitfaden

AUDAC

AUDAC AXIR/O Series Bedienungsanleitung

AUDAC

AUDAC Ateo 2 Leitfaden

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung