AUDAC AWP06 Bedienungsanleitung

User manual

AWP06

audac.eu

AWP06 - User manual02

ADDITIONAL INFORMATION

This manual is put together with much care, and is as complete as could be on the publication date. However,

updates on the specications, functionality or software may have occurred since publication. To obtain the latest

version of both manual and software, please visit the Audac website @ www.audac.eu.

AWP06 - User manual 03

Table of contents

Introduction 05

Waterproof ceiling speaker � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 05

Precautions 06

Chapter 1 08

Installation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 08

Connections � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 09

Technical specications 010

Notes 011

AWP06 - User manual04

AWP06 - User manual 05

Introduction

Waterproof ceiling speaker

The AWP06 is a waterproof ceiling speaker with a power of 6 Watt, which meets the IP65 standard. It is designed to be

used in a wide variation of in- and outdoor applications and damp locations and features a 4” loudspeaker. Due to its wide

smooth frequency response and high efciency, it ensures high-delity music reproduction and intelligible speech at very low

distortion. It can be used in 8 Ohm low impedance systems, or in 100V PA systems with power taps for 6W, 3W and 1.5W.

AWP06 - User manual06

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY

ALWAYS HANDLE THIS UNIT WITH CARE

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

USE ONLY THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE, EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER

FAILURES

AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE, THINNER OR OTHER COMBUSTIBLES

ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY SUPPORT THE WEIGHT OF THE SPEAKER. NOT DOING THIS MAY

RESULT IN THE SPEAKER FALLING DOWN

DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT

COULD FALL DOWN

AVOID MOUNTING THE SPEAKER IN LOCATIONS EXPOSED TO CONSTANT VIBRATIONS. THE MOUNTING POINTS CAN BE DAMAGED BY

EXCESSIVE VIBRATION, POTENTIALLY CAUSING THE SPEAKER TO FALL DOWN

ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH ABOVE THE GROUND. FAILURE IN DOING SO COULD CAUSE THE

SPEAKER TO FALL DOWN FOR ANY REASON

NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS

DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE HEAT

ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER

DO NOT OPERATE THE SPEAKER FOR AN EXTENDED PERIOD OF TIME AT DISTORTED SOUND. THIS COULD CAUSE (IRREPARABLE)

DAMAGE TO THE SPEAKER.

DO NOT STAND OR SIT ON, NOR HANG DOWN FROM THE SPEAKER, AS THIS MAY CAUSE FAILURE OF THE SPEAKER.

CAUTION

The symbols shown are internationally recognized symbols that warn about potential hazards of electrical products.

The lightning ash with arrow point in an equilateral triangle means that the unit contains dangerous voltages. The

exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the users manual.

These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service

the unit yourself. Refer all servicing to qualied personnel. Opening the chassis for any reason will void the manufacturer’s

warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service.

Disconnect the unit during storms to prevent damage.

AWP06 - User manual 07

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing to qualied service personnel. Do

not perform any servicing (unless you are qualied to)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and further relevant specications described

in following directives: 2014/30/EU (EMC) & 2014/35/EU (LVD).

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be disposed with regular household waste

at the end of its life cycle. This regulation is created to prevent any possible harm to the environment

or human health.

This product is developed and manufactured with high quality materials and components which can be

recycled and/or reused. Please dispose this product at your local collection point or recycling centre for

electrical and electronic waste. This will make sure that it will be recycled in an environmentally friendly

manner, and will help to protect the environment in which we all live.

AWP06 - User manual08

Chapter 1

Installation

Make a hole with a diameter of 125 mm. This is very easy when you use the carton that is inside the box.

Place the speaker in the designated position with both the double springs in an upright position as shown in

the image below. Install the unit only in a ceiling made of strong material so that the mounting springs don’t

damage the ceiling. For weak ceiling panels you can use a wooden plank to the ceiling in which you can make

the mounting hole.

When the speaker is mounted, push both springs downwards to lock the speaker in in place. Once the springs

are pushed down, the speaker will place itself properly in line with the panel. In this image the AWP06 speaker

is locked tightly and ready for use.

AWP06 - User manual 09

Connections

Be sure that you use the following polarities for your speaker cable, when using several speakers in the same

location:

Red: Negative or common

Black: Positive

The total rated input of all connected speakers may not exceed the ampliers output.

AWP06 - User manual010

Technical specications

RMS power 6 Watt

Max power 10 Watt

Impedance 8 Ohm

Sensitivity (1W / 1m) 91 dB

Sound pressure (Max W/1m) 95 dB

Frequency response (±3 dB) 100 Hz - 15 kHz

Driver 4”

IP Rating 65

Line Transformer Tappings 1 6 W / 1666 Ohm

2 3 W / 3333 Ohm

3 1.5 W / 6666 Ohm

Dimensions (Øx D) 140 x 148.5 mm

Built-in depth 148.5 mm

Cut-out measurement 125 mm (Ø)

Weight 0.79 kg

Operating temperature -20°C ~ 60°C

Construction ABS

Colours White (RAL9010)

Andere Handbücher für AWP06

Inhaltsverzeichnis

Andere AUDAC Sprecher Handbücher

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung