AUDAC WXMK2 Series Leitfaden

WXMK2 series

User & Installation

Manual

www.audac.eu

Introduction

Universal wall speaker

The WX series are 2-way performance speakers suited for a wide variety of applications,

delivering true to nature, high fidelity reproductions of music and speech.

They feature a stunningly designed and elegant looking ABS housing which is fitted with

high quality components. The speaker is available in three sizes, 3”, 5 1/4” and 8”. All

speakers are available in black and white, making them blend into every environment,

going from standard indoor home to special indoor design interior.

For optimal orientation, an included mounting bracket allows for horizontal or vertical

mounting as well as focusing of the speaker in the desired direction. Thanks to a built-in

line transformer, they can be used in both 70V/100V or low impedance applications.

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER THROW THEM

AWAY

• ALWAYS HANDLE THIS UNIT WITH CARE

• CLEAN ONLY WITH DRY CLOTH

• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING

LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE

• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR

OTHER APPARATUS THAT PRODUCE HEAT

• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST, HEAT,

MOISTURE OR VIBRATION

• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER.

• ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY SUPPORT THE

WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE SPEAKER DOWN.

• DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE SPEAKER. IF

EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL DOWN

• ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.

ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

• CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF, INFORM YOUR

VENDOR IMMEDIATELY.

• ALWAYS FOLLOW THE LOCAL REGULATIONS AND REQUIREMENTS REGARDING

INSTALLATION, SUSPENSION AND CONNECTION OF THIS LOUDSPEAKER. EVEN WHEN

OTHERWISE SPECIFIED IN THIS DOCUMENT.

• THE INSTALLATION OF THIS LOUDSPEAKER SHALL BE DONE BY QUALIFIED

PERSONNEL ONLY.

CAUTION

• USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER

• USE CABLES WITH CLEAR COLOR CODING INDICATING THE POLARITY AND

MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.

• ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.

EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.

AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,

THINNER OR OTHER COMBUSTIBLES

• AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING

THE LOUDSPEAKER

• DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT

DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing

to qualified service personnel. Do not perform any servicing

(unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and further

relevant specifications described in following directives: 2014/30/

EU (EMC) and 2014/35/EU (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be

disposed with regular houshold waste at the end of its product

life. This regulation is created to protect both the environment

and human health.

This product is developed and manufactured with high quality

materials and components which can be recycled and/or reused.

Please dispose this product to your local collection point or

recycling centre for electrical and electronic waste. This will

make to sure that it will be recycled on an environmentally friendly

manner, and will help to protect the environment in which we all

live.

Installing the WXMK2

Mounting the speaker

The loudspeaker can be mounted both horizontally and vertically through the supplied

mounting bracket. For mounting the loudspeaker on the desired mounting location,

the mounting bracket should be removed from the loudspeaker, which is done through

loosening the thumbscrews on either side of the loudspeaker. After this is done, the

bracket can be taken apart from the loudspeaker.

For a stable mounting of the loudspeaker it should always be fastened by two screws.

The position of the mounting holes depends on the mounting orientation, horizontally or

vertically. The fixation points of the bracket should be marked on the desired location

and the bracket can get mounted. The type of used fasteners shall be chosen according

to the most suitable type for the mounting surface (brick, concrete, wood, ...).

The bracket dimensions and mounting hole positions are indicated in the below drawing

and table for the various sizes of speakers.

Ø4,5

Ø10,3

Model Dimension A Dimension B

WX302MK2 174 mm 108 mm

WX502MK2 219 mm 160.4 mm

WX802MK2 358 mm 248 mm

Once the bracket is mounted onto the desired position, the speaker can be re-assembled

to the bracket by inserting and tightening both thumb screws on either side of the speaker.

The speaker can be tilted in various steps of inclination into the desired listening direction.

Connecting the speaker

For connecting the WX series speakers, the wires coming from the amplifier shall be

connected to the 4-pin terminal block connector on the rear of the speaker. Each con-

nection terminal is implemented twice, allowing direct link-through to other loudspeakers

on the same line. The polarity of the connector is indicated on the label which is attached

to the rear side of the loudspeaker, and displayed in the below drawing.

WX502 MK2

50 Watt RMS / 100 Watt Max

Impedance: 8 Ω

100V 70V Imp.

40 W

20 W

10 W

40 W

20 W

5 W

125 Ω

250 Ω

500 Ω

1000 Ω

10 W

Line transformer power taps :

−

−+ +

The selection of the power tapping and whether the speaker will be used in a low

impedance (8Ω/16Ω) or a constant voltage (70V/100V) system, the power taps can be

adjusted in 4 steps of impedance through a rotary selector switch on the rear side of

the unit. The switch can be rotated in 4 positions A, B, C & D. Each position corresponds

with a specific impedance / power setting indicated on a label attached to the speaker,

and in the table below.

8Ω

WX302 WX502 WX802

Tapping 100V 70V Imp. 100V 70V Imp 100V 70V Imp

ADO NOT USE 20 W 250 ΩDO NOT USE 40 W 125 ΩDO NOT USE 60 W 83 Ω

B20 W 10 W 500 Ω40 W 20 W 250 Ω60 W 30 W 167 Ω

C10 W 5 W

1000 Ω

20 W 10 W 500 Ω30 W 15 W 333 Ω

D5 W 2.5 W

2000 Ω

10 W 5 W

1000 Ω

15 W 7.5 W 667 Ω

Additional Information

Technical specifications

WX302 WX502

Max Power 60 Watt 100 Watt

RMS Power 30 Watt 50 Watt

Nominal impedance 8 Ω8 Ω

Line transformer taps 250 Ω– 70V/20W 125 Ω– 70V/40W

500 Ω– 100V/20W - 70V/10W 250 Ω– 100V/40W - 70V/20W

1k Ω– 100V/10W - 70V/5W 500 Ω– 100V/20W - 70V/10W

2k Ω– 100V/5W - 70V/2.5W 1k Ω– 100V/10W - 70V/5W

Sensitivity (1W/1m)

85 dB 87 dB

Sound pressure (Max W/1m)

@ 8 Ohm

100 dB 104 dB

Sound pressure (Max W/1m)

@ 100 V

95 dB 102 dB

Frequency response (± 3 dB) 90 Hz - 18 kHz

70 Hz - 18 kHz

Frequency range (-10 dB)

60 Hz - 20 kHz

55 Hz - 20 kHz

Dispersion Horizontal 100° 110°

Vertical 100° 110°

Drivers 1” HF + 3” LF 1” HF + 5 1/4” LF

Cross-over network Passive built-in (2.5 kHz) Passive built-in (2.5 kHz)

Connectors 4-pin Terminal block (5.08 mm) 4-pin Terminal block (5.08 mm)

Mounting bracket Powder coated steel Powder coated steel

Construction ABS enclosure ABS enclosure

Front finish Fine perforated steel grill Fine perforated steel grill

Ingress protection IP4x IP4x

Operation temperature range -25°C to +70°C -25°C to +70°C

Incline angle 0 ~ 90° left & right 0 ~ 90° left & right

Colour White WX302MK2/W (RAL9003) WX502MK2/W (RAL9003)

Black WX302MK2/B (RAL9005) WX502MK2/B (RAL9005)

Dimensions (W x H x D) 199 x 129 x 120 mm 212 x 147 x 136 mm

Weight 1.66 Kg 2.75 Kg

Packaging Carton box (pair) Carton box (pair)

Shipping weight & Volume 3.64 Kg - 0.014 Cbm 5.5 Kg - 0.018 Cbm

Accessories included 4-pin terminal block connector 4-pin terminal block connector

Mounting bracket Mounting bracket

Additional Information

Technical specifications

WX302 WX502

Max Power 60 Watt 100 Watt

RMS Power 30 Watt 50 Watt

Nominal impedance 8 Ω8 Ω

Line transformer taps 250 Ω– 70V/20W 125 Ω– 70V/40W

500 Ω– 100V/20W - 70V/10W 250 Ω– 100V/40W - 70V/20W

1k Ω– 100V/10W - 70V/5W 500 Ω– 100V/20W - 70V/10W

2k Ω– 100V/5W - 70V/2.5W 1k Ω– 100V/10W - 70V/5W

Sensitivity (1W/1m)

85 dB 87 dB

Sound pressure (Max W/1m)

@ 8 Ohm

100 dB 104 dB

Sound pressure (Max W/1m)

@ 100 V

95 dB 102 dB

Frequency response (± 3 dB) 90 Hz - 18 kHz

70 Hz - 18 kHz

Frequency range (-10 dB)

60 Hz - 20 kHz

55 Hz - 20 kHz

Dispersion Horizontal 100° 110°

Vertical 100° 110°

Drivers 1” HF + 3” LF 1” HF + 5 1/4” LF

Cross-over network Passive built-in (2.5 kHz) Passive built-in (2.5 kHz)

Connectors 4-pin Terminal block (5.08 mm) 4-pin Terminal block (5.08 mm)

Mounting bracket Powder coated steel Powder coated steel

Construction ABS enclosure ABS enclosure

Front finish Fine perforated steel grill Fine perforated steel grill

Ingress protection IP4x IP4x

Operation temperature range -25°C to +70°C -25°C to +70°C

Incline angle 0 ~ 90° left & right 0 ~ 90° left & right

Colour White WX302MK2/W (RAL9003) WX502MK2/W (RAL9003)

Black WX302MK2/B (RAL9005) WX502MK2/B (RAL9005)

Dimensions (W x H x D) 199 x 129 x 120 mm 212 x 147 x 136 mm

Weight 1.66 Kg 2.75 Kg

Packaging Carton box (pair) Carton box (pair)

Shipping weight & Volume 3.64 Kg - 0.014 Cbm 5.5 Kg - 0.018 Cbm

Accessories included 4-pin terminal block connector 4-pin terminal block connector

Mounting bracket Mounting bracket

WX802

Max Power 140 Watt

RMS Power 70 Watt

Nominal impedance 16 Ω

Line transformer taps 83 Ω– 70V/60W

167 Ω– 100V/60W - 70V/30W

333 Ω– 100V/30W - 70V/15W

667 Ω– 100V/15W - 70V/7.5W

Sensitivity (1W/1m)

89 dB

Sound pressure (Max W/1m)

@ 8 Ohm

108 dB

Sound pressure (Max W/1m)

@ 100 V

106 dB

Frequency response (± 3 dB)

60 Hz - 17 kHz

Frequency range (-10 dB) 50 Hz - 20 kHz

Dispersion Horizontal 110°

Vertical 110°

Drivers 1” HF + 8” LF

Cross-over network Passive built-in (2.4 kHz)

Connectors 4-pin Terminal block (5.08 mm)

Mounting bracket Powder coated steel

Construction ABS enclosure

Front finish Fine perforated steel grill

Ingress protection IP4x

Operation temperature range -25°C to +70°C

Incline angle 0 ~ 90° left & right

Colour White WX802MK2/W (RAL9003)

Black WX802MK2/B (RAL9005)

Dimensions (W x H x D) 270 x 360 x 215 mm

Weight 7.5 Kg

Packaging Carton box (pair)

Shipping weight & Volume 15.2 Kg - 0.064 Cbm

Accessories included 4-pin terminal block connector

Mounting bracket

Notes

Andere Handbücher für WXMK2 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AUDAC Sprecher Handbücher

AUDAC

AUDAC MTX Bedienungsanleitung

AUDAC

AUDAC VEXO208 Bedienungsanleitung

AUDAC

AUDAC ATEO4 Bedienungsanleitung

AUDAC

AUDAC NELO706V Series Bedienungsanleitung

AUDAC

AUDAC CSE55 Montage- und Bedienungsanleitung

AUDAC

AUDAC Ateo 4 Leitfaden

AUDAC

AUDAC SPRING-FIT CENA506 Bedienungsanleitung

AUDAC

AUDAC Outdoor Series Leitfaden

AUDAC

AUDAC SPRING-FIT CENA812 Bedienungsanleitung

AUDAC

AUDAC WX802/OB Montage- und Bedienungsanleitung

AUDAC

AUDAC MERO2 Leitfaden

AUDAC

AUDAC CS85 Montage- und Bedienungsanleitung

AUDAC

AUDAC CIRA506 Bedienungsanleitung

AUDAC

AUDAC MERO6 Leitfaden

AUDAC

AUDAC PX108 Montage- und Bedienungsanleitung

AUDAC

AUDAC VEXO112A Bedienungsanleitung

AUDAC

AUDAC AXIR Montage- und Bedienungsanleitung

AUDAC

AUDAC BASO10/B Leitfaden

AUDAC

AUDAC CALI Series Bedienungsanleitung

AUDAC

AUDAC ATEO2S Leitfaden

AUDAC

AUDAC CS75B Bedienungsanleitung

AUDAC

AUDAC ASP20 Bedienungsanleitung

AUDAC

AUDAC WX Series Leitfaden

AUDAC

AUDAC ALTI Series Leitfaden

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung