AUDAC ATEO2S Leitfaden

ATEO2S

User & Installation manual

www.audac.eu

Introduction

Compact full-range speaker with ClickMount™

The ATEO is a series of extraordinary loudspeakers especially designed for fixed install

indoor applications, ranging from modern residential applications to the most demanding

designer applications in environments such as retail stores, pubs, restaurants or even

clubs.

The ATEO2S is an ultra-compact model of this serie, which smoothly integrates into any

interior like no other loudspeaker. Fitted with a 2” aluminum cone driver, it provides a

full-range, warm and detailed sound with an improved response in the low frequencies

due to the ported enclosure. It features a stunningly designed and elegant looking ABS

housing which is fitted with high-quality components. The newly designed mounting

bracket uses the ClickMount™ technology and allows the installation of the speaker on

any ceiling or horizontal surface while directional placement and tilting can be done in

any possible direction.

The minimalistic bracket design in combination with the elegant designed cabinet

provides an elegant solution which finds its application in any type of interior.

The installation of the speaker is done by fixing the included L-shaped bracket to the

desired location on the ceiling and connecting the wires to the spring clamp terminal

block. After this is done, the female connection socket on the rear of the speaker needs

to be plugged on the male connection part of the bracket. This way the speaker is

instantly fixated and connected.

All ATEO series speakers are available in Black (/B) or White (/W).

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER THROW THEM

AWAY

• ALWAYS HANDLE THIS UNIT WITH CARE

• CLEAN ONLY WITH DRY CLOTH

• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING

LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE

• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR

OTHER APPARATUS THAT PRODUCE HEAT

• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST, HEAT,

MOISTURE OR VIBRATION

• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER.

• ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY SUPPORT THE

WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE SPEAKER DOWN.

• DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE SPEAKER. IF

EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL DOWN

• ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.

ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

• CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF, INFORM YOUR

VENDOR IMMEDIATELY.

• ALWAYS FOLLOW THE LOCAL REGULATIONS AND REQUIREMENTS REGARDING

INSTALLATION, SUSPENSION AND CONNECTION OF THIS LOUDSPEAKER. EVEN WHEN

OTHERWISE SPECIFIED IN THIS DOCUMENT.

• THE INSTALLATION OF THIS LOUDSPEAKER SHALL BE DONE BY QUALIFIED

PERSONNEL ONLY.

CAUTION

• USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER

• USE CABLES WITH CLEAR COLOUR CODING INDICATING THE POLARITY AND

MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.

• ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.

EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.

• AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,

THINNER OR OTHER COMBUSTIBLES

• AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING

THE LOUDSPEAKER

• DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT

DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing

to qualified service personnel. Do not perform any servicing

(unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and further

relevant specifications described in following directives: 2014/30/

EU (EMC) and 2014/35/EU (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be

disposed with regular houshold waste at the end of its product

life. This regulation is created to protect both the environment

and human health.

This product is developed and manufactured with high quality

materials and components which can be recycled and/or reused.

Please dispose this product to your local collection point or

recycling centre for electrical and electronic waste. This will

make to sure that it will be recycled on an environmentally friendly

manner, and will help to protect the environment in which we all

live.

Installing the ATEO2S

ClickMount™ Technology

Every ATEO2S speaker uses the unique Clickmount™technology, offering an elegant

and slim solution for mounting the loudspeaker to the ceiling, while providing a great

ease for installing the loudspeaker.

Using this mounting solution, the speaker can be installed on any ceiling or horizontal

surface, while directional placement and tilting can be done in any possible direction,

even after the speaker is already installed.

The installation of the loudspeaker should be done according to a simple 4-step

procedure, which is described below:

Step 1: Attach the mounting bracket

The first step is to attach the mounting bracket to the desired location. The mounting

bracket has to be fixed by four screws in a square shape. The mutual distance is 35mm

in both directions. The used fasteners should be chosen according to the mounting

surface (brick, concrete, wood, ... )

Step 2: Make the connections

After the mounting bracket is attached, the connections shall be made. The ATEO2S

only allows connection in low impedance mode (8 Ohm for ATEO2S and 16 Ohm for

ATEO2SD) and therefore a terminal block connector is provided. The wires coming

from the amplifier should be connected to the spring clamp terminal block connector.

The polarity is indicated through the color coding of the wires. The red wire is the +

terminal while the black wire is the COM terminal. Make sure the polarity is always

correct throughout the entire system.

Once connected, the ceiling cover can be slided and clicked in place, nicely covering

the screws and connections. Mind the direction of the fixation clips at the inner side of

the cover, to make sure they nicely get into place when pressed onto the bracket.

Mind the polarity markings when wiring the loudspeaker cables.

Step 3: Attach the speaker

After the bracket is mounted and the connections have been made, the speaker shall be

attached. Attaching is simply done by inserting the male 6.3 mm plug from the bracket

into the female counterpart on the rear side of the loudspeaker. Once inserted, the

speaker shall be pressed on the male part until the connections are clicked in position.

Now the speaker is safely fixated and connected.

Step 4: Position the loudspeaker

The last step in the installation procedure of the speaker is pointing it into the correct

direction. The ball joint mechanism allows adjustment of the direction of the loudspeaker

without requiring any tools.

Carefully point the speaker into the correct direction and it will automatically remain in

this position.

Detaching the speaker

In case the speaker needs to be detached from the bracket press the small button on

the back of the speaker, marked on the drawing below. This will release the locking

mechanism inside the speaker. Do this while pulling the speaker from the male part of

the bracket to detach the speaker.

Additional Information

Technical specifications

Max Power 20 Watt

RMS Power 10 Watt

Nominal impedance ATEO2S

ATEO2SD

8 Ohm

16 Ohm

Sensitivity (1W/1m) 83 dB

Sound Pressure (Max W/1m)

@ 8 Ohm

93 dB

Frequency Response (± 3 dB) 120 Hz - 20 kHz

Drivers 2” Aluminum full range

Connectors 2-pin spring clamp

Mounting bracket ClickMount™

Construction ABS

Front finish Fine perforated steel grill

Incline Angle Left & Right 175°

Bottom 90°

Top 0°

Colour White ATEO2S/W (RAL9003)

ATEO2SD/W (RAL9003)

Black ATEO2S/B (RAL9005)

ATEO2SD/B (RAL9005

Dimensions (W x H x D) 80.5 x 201.7 x 158.7 mm

Weight 0.52 Kg

Packaging Carton box (pair)

Shipping weight & Volume 1.35 Kg - 0.0084 Cbm (pair)

Inhaltsverzeichnis

Andere AUDAC Sprecher Handbücher

AUDAC

AUDAC CELO6 Leitfaden

AUDAC

AUDAC AXIR/O Series Bedienungsanleitung

AUDAC

AUDAC MERO5 Leitfaden

AUDAC

AUDAC HS212MK2 Leitfaden

AUDAC

AUDAC AWP06 Montage- und Bedienungsanleitung

AUDAC

AUDAC CELO5 Leitfaden

AUDAC

AUDAC Ateo 2 Leitfaden

AUDAC

AUDAC CS85 Montage- und Bedienungsanleitung

AUDAC

AUDAC WXMK2 Series Leitfaden

AUDAC

AUDAC BASO10/B Leitfaden

AUDAC

AUDAC CALI Series Bedienungsanleitung

AUDAC

AUDAC NELO706 Series Bedienungsanleitung

AUDAC

AUDAC BASO Series Leitfaden

AUDAC

AUDAC XENO 6 Leitfaden

AUDAC

AUDAC GIAX Montage- und Bedienungsanleitung

AUDAC

AUDAC CIRA506 Bedienungsanleitung

AUDAC

AUDAC WS500 Bedienungsanleitung

AUDAC

AUDAC ATEO4 Bedienungsanleitung

AUDAC

AUDAC ATEO2D Leitfaden

AUDAC

AUDAC WX502B Montage- und Bedienungsanleitung

AUDAC

AUDAC ARES5A Bedienungsanleitung

AUDAC

AUDAC SPRING-FIT CENA Series Bedienungsanleitung

AUDAC

AUDAC VEXO110A Bedienungsanleitung

AUDAC

AUDAC AXIR Montage- und Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung