Audio Technica AT2020USB+ Bedienungsanleitung

AT2020USB+

User Manual

Cardioid Condenser USB Microphone

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To

ensure safety, observe all warnings and cautions while using the product.

Cautions for the product

• Do not subject the product to strong impact to avoid malfunction.

• Do not disassemble, modify or attempt to repair the product.

• Do not handle the product with wet hands to avoid electric shock or injury.

• Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place.

Safety precautions

Notes on use

• Be sure to read the connected device’s user manual before use.

• When the product is used for a long time, the product may become discolored due to ultraviolet light

(especially direct sunlight) and wear.

• Use the included USB cable for connection.

• Make sure to hold the plug when connecting and disconnecting the USB cable. The USB cable may become

severed or an accident may occur if you pull on the USB cable itself.

• When using the USB cable, be careful not to twist it to prevent damage to the USB cable.

• Do not wind the USB cable at the base of the plug to prevent a disconnection.

• Do not use a USB hub or USB extension cable.

• When plugging the USB cable into the microphone and the connected device, check that the connector

is facing in the correct direction before inserting it straight. Inserting the plug diagonally may cause a

malfunction.

• When not in use, disconnect the USB cable from the product.

• Make sure that no foreign matter enters inside the mesh part of the product. Performance may be degraded.

• For important recordings, perform a trial recording beforehand to make sure that the sound is recorded

correctly.

• Operation is not guaranteed with all computers.

• Operation cannot be guaranteed in a home-built computer, personal OS upgrade, or multi-boot environment.

• Audio-Technica will not be liable in any way for any loss or damage to software or data connected to the

product.

Part names and functions

1Microphone

2Indicator lamp

Lights blue to show that the microphone is

receiving power via USB.

3Mix control dial

Adjusts the balance of the volume level of the

sound source stored on the computer and the

monitored volume level of the audio being

input.

4Headphone level control dial

Adjusts volume of headphone output.

5USB terminal (USB Type-B)

Use to connect the included USB cable.

6Headphone jack

(3.5 mm (1/8") stereo mini-jack)

Use to connect the headphones.

7USB cable

(3.1 m (10'), USB Type-A - USB Type-B)

3 4

Front Rear

Setting up the product

For best results, set up the microphone so that it is facing the sound source. When using it to record voices,

place it directly in front of the speaker/singer. Do the same thing when recording sound sources such as acoustic

guitar, drums, or piano. Before using the product, try setting it up in various positions, to discover how best to

record sound in your current environment.

Connection procedure

1. Connect the USB cable (USB Type-B side) to the USB terminal on the underside of the product.

2. Connect the USB cable (USB Type-A side) to the computer.

• If you are using Windows, refer to "Computer settings (Windows 8.1/10)" on p.5 to do the settings.

• If you are using Mac, refer to "Computer settings (Mac OS X)" on p.9 to do the settings.

Using the product

Computer settings (Windows 8.1/10)

1. Use the USB cable to connect the product to a computer.

2. Confirm that the indicator lamp on the product lights.

• Indicator lamp lights blue to show that the microphone is receiving power via USB.

• The computer automatically recognizes the product and the driver is installed on the computer.

• In the lower right part of the screen, a message appears indicating that new hardware has been found or a

notification appears that the driver software has been installed.

3. Open the "Control Panel".

• For Windows 10

Select "Start menu" > "Windows System" > "Control Panel".

Using the product

• For Windows 8.1

Right click "Start Menu", and select "Control Panel".

4. Select "Sound".

Using the product

5. In the "Playback" tab, confirm that the product is selected.

• If the product is not selected, select the product, and then click "Set Default".

6. In the "Recording" tab, confirm that the product is selected.

• If the product is not selected, select the product, and then click "Set Default".

Using the product

7. Double-click the product's icon, and open the "Microphone Properties" window.

8. Select the "Levels" tab to adjust the microphone level.

• To adjust the microphone level after you start recording, do the adjustments from this window.

Using the product

Computer settings (Mac OS X)

1. Use the USB cable to connect the product to a computer.

2. Confirm that the indicator lamp on the product lights.

• Indicator lamp lights blue to show that the microphone is receiving power via USB.

• The computer automatically recognizes the product and the driver is installed on the computer.

3. From the Apple icon, select "System Preferences".

4. Select "Sound".

Andere Handbücher für AT2020USB+

Inhaltsverzeichnis

Andere Audio Technica Mikrofon Handbücher

Audio Technica

Audio Technica AT4080 Bedienungsanleitung

Audio Technica

Audio Technica UniPlate AT891R Bedienungsanleitung

Audio Technica

Audio Technica UniPoint AT853a Bedienungsanleitung

Audio Technica

Audio Technica ES943 Handbuch

Audio Technica

Audio Technica Engineered Sound AT845R Bedienungsanleitung

Audio Technica

Audio Technica ATW-C3300 Bedienungsanleitung

Audio Technica

Audio Technica AT831R Bedienungsanleitung

Audio Technica

Audio Technica AT898 Bedienungsanleitung

Audio Technica

Audio Technica ES935SML6 Betriebsanleitung

Audio Technica

Audio Technica ES925C6/XLR Bedienungsanleitung

Audio Technica

Audio Technica AT8024 Bedienungsanleitung

Audio Technica

Audio Technica unipoint U857QLU Bedienungsanleitung

Audio Technica

Audio Technica AT899 Bedienungsanleitung

Audio Technica

Audio Technica AT835b Bedienungsanleitung

Audio Technica

Audio Technica PROPOINT PRO 40Q Bedienungsanleitung

Audio Technica

Audio Technica UNIPOINT U857Q Bedienungsanleitung

Audio Technica

Audio Technica unipoint U873R Bedienungsanleitung

Audio Technica

Audio Technica ATM410 Bedienungsanleitung

Audio Technica

Audio Technica ATR1300x Bedienungsanleitung

Audio Technica

Audio Technica UniLine unipoint U857QMU Bedienungsanleitung

Audio Technica

Audio Technica AT4033/CL Bedienungsanleitung

Audio Technica

Audio Technica UniPoint AT899 Bedienungsanleitung

Audio Technica

Audio Technica ATM710 Bedienungsanleitung

Audio Technica

Audio Technica ES991 Betriebsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung