Audio Technica OMNIDIRECTIONAL DYNAMIC AT804 Bedienungsanleitung

200 Hz

1 kHz

5 kHz

8 kHz

LEGEND

same as 1 kHz

Polar Pattern

SCALE IS 5 DECIBELS PER DIVISION

120

150

210

240

270

300

330

180

Frequency in Hertz

Response in dB

10 dB

20k

10k

500

200100

Frequency Response

LEGEND

12" or more on axis

• Ideal for interviews, sportscasting and as the “mono” mic when

used in conjunction with a stereo microphone

•Omnidirectional polar pattern provides natural reproduction of

surrounding ambience

• Rugged housing with hardened-steel grille stands up to field use

• Internal shock mounting minimizes handling and cable noise

Output from the microphone’s XLRM-type connector is low

impedance (Lo-Z) balanced. The signal appears across Pins 2

and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” –

positive acoustic pressure produces positive voltage at Pin 2.

To avoid phase cancellation and poor sound, all mic cables must be

wired consistently: Pin 1-to-Pin 1, etc. For a high-impedance (Hi-Z)

mic input, connect a Lo-Z balanced cable to a Hi-Z matching

transformer (A-T CP8201 or equal) at the equipment input.

Plug Type Ground Audio “+” Audio “-”

XLR Pin 1 Pin 2 Pin 3

1/4" “TRS” Sleeve Tip Ring

1/4" Sleeve Tip Sleeve

The high sensitivity of the AT804 assures useful output and an

excellent match to most input sources. In some cases, however, an

attenuator such as the Audio-Technica AT8202 may be required

between the microphone and preamplifier to avoid overloading

sensitive input stages.

Take care to keep foreign particles from entering the windscreen.

An accumulation of iron or steel filings on the diaphragm, and/or

foreign material in the windscreen’s mesh surface, can degrade

performance.

AT804 SPECIFICATIONS†

ELEMENT Dynamic

POLAR PATTERN Omnidirectional

FREQUENCY RESPONSE 50-15,000 Hz

OPEN CIRCUIT SENSITIVITY –49 dB (3.5 mV) re 1V at 1 Pa*

IMPEDANCE 600 ohms

WEIGHT (less accessories) 7.5 oz (213 g)

DIMENSIONS 5.94" (151.0 mm) long,

1.42" (36.0 mm) head diameter

OUTPUT CONNECTOR Integral 3-pin XLRM-type

ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27

threaded stands; soft protective

pouch

†In the interest of standards development, A.T.U.S. offers full details on its test

methods to other industry professionals on request.

*1 Pascal = 10 dynes/cm 2= 10 microbars = 94 dB SPL

Specifications are subject to change without notice.

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

Audio-

Technica Limited, Old Lane, Leeds LS11 8AG England

www.audio-technica.com

AT804 OMNIDIRECTIONAL DYNAMIC MICROPHONE

Andere Audio Technica Mikrofon Handbücher

Audio Technica

Audio Technica Artist Elite AE5400 Bedienungsanleitung

Audio Technica

Audio Technica ATR1100x Bedienungsanleitung

Audio Technica

Audio Technica AT2020USB+ Bedienungsanleitung

Audio Technica

Audio Technica AT813a Bedienungsanleitung

Audio Technica

Audio Technica AT4080 Bedienungsanleitung

Audio Technica

Audio Technica AT831b Bedienungsanleitung

Audio Technica

Audio Technica UniPoint AT873R Bedienungsanleitung

Audio Technica

Audio Technica AT2020 Bedienungsanleitung

Audio Technica

Audio Technica AT2021 Bedienungsanleitung

Audio Technica

Audio Technica ATND1061DAN Bedienungsanleitung

Audio Technica

Audio Technica AT3528 Bedienungsanleitung

Audio Technica

Audio Technica ATM650 Bedienungsanleitung

Audio Technica

Audio Technica ONEPOINT AT825 Bedienungsanleitung

Audio Technica

Audio Technica AT875R Bedienungsanleitung

Audio Technica

Audio Technica ES933PMC Bedienungsanleitung

Audio Technica

Audio Technica ES925H6/XLR Bedienungsanleitung

Audio Technica

Audio Technica UniLine U853RU Bedienungsanleitung

Audio Technica

Audio Technica Artist series ATM31 Installationsanleitung

Audio Technica

Audio Technica M3 Bedienungsanleitung

Audio Technica

Audio Technica AE3300 Bedienungsanleitung

Audio Technica

Audio Technica ES964 Bedienungsanleitung

Audio Technica

Audio Technica U841A Bedienungsanleitung

Audio Technica

Audio Technica AT2020USB-XP Bedienungsanleitung

Audio Technica

Audio Technica ATM75 Installationsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung