AudioCodes 450HD Bedienungsanleitung

Andere Handbücher für 450HD

3

Inhaltsverzeichnis

Andere AudioCodes IP-Telefon Handbücher

AudioCodes

AudioCodes 420HD Bedienungsanleitung

AudioCodes

AudioCodes 420HD Gebrauchs- und Pflegehandbuch

AudioCodes

AudioCodes 445HD Bedienungsanleitung

AudioCodes

AudioCodes 300HD Series Bedienungsanleitung

AudioCodes

AudioCodes 310HD Gebrauchs- und Pflegehandbuch

AudioCodes

AudioCodes 405HD Gebrauchs- und Pflegehandbuch

AudioCodes

AudioCodes C435HD Bedienungsanleitung

AudioCodes

AudioCodes 420HD Gebrauchs- und Pflegehandbuch

AudioCodes

AudioCodes 420HD Bedienungsanleitung

AudioCodes

AudioCodes Huddle Room Solution Bedienungsanleitung

AudioCodes

AudioCodes 420HD Gebrauchs- und Pflegehandbuch

AudioCodes

AudioCodes 300HD Series Bedienungsanleitung

AudioCodes

AudioCodes 430HD Bedienungsanleitung

AudioCodes

AudioCodes 420HD Bedienungsanleitung

AudioCodes

AudioCodes 445HD Bedienungsanleitung

AudioCodes

AudioCodes 310HD Bedienungsanleitung

AudioCodes

AudioCodes 420HD Bedienungsanleitung

AudioCodes

AudioCodes 445HD Bedienungsanleitung

AudioCodes

AudioCodes C435 Bedienungsanleitung

AudioCodes

AudioCodes C450HD Bedienungsanleitung

AudioCodes

AudioCodes 405HD Bedienungsanleitung

AudioCodes

AudioCodes 420HD Anleitung zur Verwendung

AudioCodes

AudioCodes 420HD Bedienungsanleitung

AudioCodes

AudioCodes 320HD Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

AudioCodes 450HD IP Phone Expansion Unit

Installation Guide

1 |Page

1. Before Installing

Congratulations on purchasing the Expansion Module for your AudioCodes 450HD IP Phone!

Before installing it, make sure the following items are included in the shipped box:

Expansion Module

Kit containing five screws

2. Installation Process

Note: Before proceeding with the installation:

•Disconnect the phone from the Power Supply / Power over Ethernet (PoE)

•Obtain a Philips screwdriver

To connect the Expansion Module to the 450HD phone:

Step 1: Prepare the two units – see here

Step 2: Remove the phone’s side panel – see here

Step 3: Connect the Expansion Module to the phone – see here

Step 4: Attach the panel removed from the phone in Step 3, to the Expansion Module – see here

Step 5: Secure the assembly – see here

Step 6: Install the Expansion Module's base stand and the phone's base stand - see here

Step 7: Mount the assembled unit - see here

2 |Page

Step 1: Place the phone and the Expansion Module on a table alongside one other.

Step 2: Invert the phone on a surface that won’t scratch the screen such as a towel or printer paper.

Avoid inverting the phone on the surface of a desk. Then unscrew the three screws shown below in

order to remove the phone’s side panel:

3 |Page

Step 3: Return the phone to an upright position. Remove the Expansion Module’s connector’s rubber

cover and then connect the Expansion Module to the phone. Note the connector and PEM direction.

4 |Page

Step 4: Attach the panel that you removed from the phone in Step 3 to the side of the Expansion

Module, like this:

Step 5: Invert the assembled unit and secure the side panel by screwing in the three screws, like this:

Step 6: [Refer again to the figure above] Secure the connection of the two units by screwing in

these five screws.

5 |Page

Step 7: With the assembly inverted, mount the phone on its dedicated base stand and the Expansion

Module on its dedicated base stand, like this:

Slots in the stands are slid onto rails on the units. The figure above shows the phone

mounted on the short edge of its ‘L’ shaped base stand, and the Expansion Module mounted on

the short edge of its ‘L’ shaped base stand. The long edge of the ‘L’ can alternatively be used per

user preference, depending on sources of glare in the office.

6 |Page

Notice Information

Information contained in this document is believed to be accurate and reliable at the time of printing.

However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy

of printed material after the Date Published nor can it accept responsibility for errors or omissions.

Updates to this document can be downloaded from https://www.audiocodes.com/library/technical-

documents.

This document is subject to change without notice.

Date Published: August-07-2018

LTRT-12828