AudioCodes 450HD Bedienungsanleitung

AudioCodes 450HD and C450HD IP Phones

Quick Guide

Page | 1

1. Before Installing

Congratulations on purchasing your AudioCodes 450HD or C450HD IP Phone!

Before installing your phone, make sure the following items are included in the shipped box:

450HD or C450HD IP Phone

AC power adapter (optional)

Cat 5e Ethernet cable

Handset

Handset cord

Desktop stand

Wall mount

2. Physical Description

Navigation Control

Touch Screen

Back Key

VOICEMAIL Key

HOLD Key

Alphanumerical

Keypad

Headset Key

CONTACTS Key

REDIAL Key

TRANSFER Key

Mute Key

Volume Keys

MENU Key

Speakerphone Key

Microphone

Page | 2

3. Cabling the Phone

Warning: Prior to connecting power, refer to the Compliancy and Regulatory Information

document at https://www.audiocodes.com/library/technical-documents.

To cable the phone:

1. [Refer to the illustration below] Connect the short, straight end of the phone cord to the handset

and the longer straight end of the cord to the handset jack on the phone.

2. (Optional) Connect a headset to the RJ-9 headset port , or to one of the two USB ports .

3. Connect the RJ-45 LAN port to your LAN network (LAN port or LAN switch/router) with a CAT 5 / 5e

Ethernet cable.

4. Connect the RJ-45 PC port to a computer with a CAT 5 / 5e straight-through Ethernet cable.

5. Connect the connector tip of the AC power adapter to the phone's DC 12V power socket and

connect the two-prong AC adapter directly to the electrical wall outlet. When the phone powers up,

all the LEDs momentarily light up.

Page | 3

4. Mounting the Phone on a Desktop or Wall

Desktop: Slide the L-shaped stand's short or long edge slots onto these rails.

Wall: Slide the wall mount fitting onto these rails.

5. Signing In

Note: This section is applicable only to Skype for Business/Teams Compatible.

To sign in with Skype for Business client when using BToE:

Refer to the 450HD or the C450HD IP Phone User's Manual.

To sign in with a PIN code (excludes access to Microsoft Outlook Calendar):

1. In the Offline idle screen, touch Sign In, and then touch the PIN Code option.

2. Enter the phone number and PIN, and then touch Select.

Wall Mount

Desk Mount

Page | 4

To sign in with a username and password:

1. In the Offline idle screen, touch Sign In, and then touch the User name and Password option.

2. Enter the ‘Sign-in address’ (SIP address), (e.g., john.doe@enterprise.com) and ‘User name’, (e.g.,

johnd@enterprise.com), and then enter the password. Get it from the network administrator (it’s the

same as the Windows credentials).

3. Touch the Select softkey.

To sign in with Web Sign-in (Cloud) (applies only to Microsoft Cloud PBX users):

1. In the Offline idle screen, touch Sign In, and then select the Web Sign-in (Cloud) option.

2. Using your web browser, navigate to the URL (Microsoft's Cloud PBX login page) shown in the Web

Sign-in (Cloud) screen (above).

3. Enter the pairing code, and then click Next:

Page | 5

4. Enter the ‘Sign-in address’ (SIP address), (e.g., john.doe@enterprise.com) and ‘User name’, (e.g.,

johnd@enterprise.com), and then enter the password.

To sign in with Web Login:

1. In the Offline idle screen, touch Sign In, and then touch the Web Login option.

2. Using your web browser, navigate to the URL shown in the Web Login screen (above).

3. Enter the ‘Sign-in address’ (SIP address), ‘User name’ and 'Password', and then click Sign in.

Page | 6

To sign in with the Device Manager:

If the IP phone is managed by the Device Manager, web login is performed using a dedicated web

1. Using your web browser, navigate to the URL shown in the Web Login screen (below).

2. Enter the 'Code ID', ‘Sign-in address’ (SIP address) and ‘User Name’, and then enter the 'Password'.

To sign out: Touch the STATUS menu when the phone is idle, and then touch SIGN OUT.

Note: Some Skype for Business/Teams Compatible features are supported only when

signing in with username and password (e.g., Calendar).

Page | 7

6. Changing your Presence Status

Note: This section is applicable only to Skype for Business/Teams Compatible.

To change your presence: Touch the STATUS menu,

touch the required presence option, and then touch the SELECT menu.

To enable Skype for Business to automatically update presence:

Touch the STATUS menu, and then navigate to and select Reset.

7. Basic Phone Operations

To make a call: Enter a phone number, and then touch the DIAL menu. To call a phone contact,

touch the DIRECTORY menu, select the directory contact, and then touch the DIAL menu.

To redial a number: Press the REDIAL key, select a dialed number, and then touch the DIAL menu.

To answer a call: Pick up the handset, or press the speaker or headset key.

To put a call on hold and make another call: Press the HOLD key on the phone, touch the CALL

MENU and then select New Call.Enter a phone number, and then press DIAL. To return to the held

call, navigate to the held call, and then uncheck the HOLD touch menu.

To mute yourself: Press the mute key. To unmute yourself, press the mute key again.

To transfer a call: During a call, press the TRANSFER key on the phone, enter a number in the

Transfer to… field, and then press the TRANSFER touch menu.

To forward incoming calls to another phone:

1. When the phone is idle, touch the FORWARD menu, and then touch Forward to a number.

2. Enter the number to which you want to forward the calls, and then touch the START menu.

To deactivate call forwarding, touch the FORWARD menu, and then select Do not forward calls.

Presence

Page | 8

8. Connecting to a Router via Wi-Fi

Note: This section is applicable only to C450HD (models ordered with Wi-Fi functionality).

The phone can connect to an Access Point via Wi-Fi. The Wi-Fi interface can be used to make VoIP calls

over Wi-Fi, when the phone is installed in an environment free of LAN/cables.

If an Ethernet cable does not connect the phone to a LAN port, the phone displays a "LAN Link Failure"

message and a Networks softkey.

You can connect to Wi-Fi by:

Touching the Networks softkey in the phone’s main menu -or-

Navigating to the ‘Settings’ menu,and then selecting the Wi-Fi option.

9. Enabling or Disabling Wi-Fi

Note: This section is applicable only to C450HD (models ordered with Wi-Fi functionality).

To enable Wi-Fi:

1. Using the left and right rim of the navigation button on the phone, select Enabled (Wi-Fi is

disabled by default):

Page | 9

2. After enabling Wi-Fi, "Searching for networks…" is displayed. The phone then displays the

available Wi-Fi Access Points. Touch the Refresh softkey to display more networks. Select the

desired Wi-Fi Access Point (network):

3. Enter the Wi-Fi password if needed, and then touch the Connect softkey:

4. When connected to the Access Point, "Connected" is displayed:

Page | 10

10. Configuring Bluetooth

Note: This section is applicable only to C450HD (models ordered with Bluetooth

functionality).

The Bluetooth interface is used to connect the phone to a wireless headset or speaker.

To pair and connect a remote Bluetooth device:

1. Press the phone’s MENU hard key, and then select the Settings option.

2. In the Settings screen, select the Bluetooth Settings option, and then in the Bluetooth Settings

screen, select the Bluetooth Scan option.

3. The phone starts scanning for Bluetooth devices if there are devices that are not paired:

Andere Handbücher für 450HD

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AudioCodes IP-Telefon Handbücher

AudioCodes

AudioCodes 310HD Gebrauchs- und Pflegehandbuch

AudioCodes

AudioCodes 400 Series Bedienungsanleitung

AudioCodes

AudioCodes 445HD Bedienungsanleitung

AudioCodes

AudioCodes C455HD Series Bedienungsanleitung

AudioCodes

AudioCodes 420HD Bedienungsanleitung

AudioCodes

AudioCodes 450HD Bedienungsanleitung

AudioCodes

AudioCodes UC-HRS-457-SPK Bedienungsanleitung

AudioCodes

AudioCodes C455HD Series Bedienungsanleitung

AudioCodes

AudioCodes C455HD Series Bedienungsanleitung

AudioCodes

AudioCodes 320HD Bedienungsanleitung

AudioCodes

AudioCodes 420HD Gebrauchs- und Pflegehandbuch

AudioCodes

AudioCodes 440HD Bedienungsanleitung

AudioCodes

AudioCodes 400HD Series Bedienungsanleitung

AudioCodes

AudioCodes 430HD Bedienungsanleitung

AudioCodes

AudioCodes 300HD Series Bedienungsanleitung

AudioCodes

AudioCodes 420HD Gebrauchs- und Pflegehandbuch

AudioCodes

AudioCodes 450HD Bedienungsanleitung

AudioCodes

AudioCodes 400HD Series Bedienungsanleitung

AudioCodes

AudioCodes 400HD Series Bedienungsanleitung

AudioCodes

AudioCodes 420HD Bedienungsanleitung

AudioCodes

AudioCodes 430HD Bedienungsanleitung

AudioCodes

AudioCodes 300HD Series Bedienungsanleitung

AudioCodes

AudioCodes 420HD Gebrauchs- und Pflegehandbuch

AudioCodes

AudioCodes 400HD Series Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung