Audiotel DetectIV Bedienungsanleitung
DETECTIV User Manual
Part No: 2-400-0001
2 AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
DETECTIV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04) 3
© 2004 Audiotel International Ltd
Under the copyright laws, this manual may not be copied, in whole or part, without the written
consent of Audiotel International Ltd.
Every effort has been made to ensure the accuracy of this manual. The instructions and descrip-
tions are accurate at the time of publication. However, succeeding versions of the equipment and
manuals are subject to change without notice. Audiotel assumes no liability for damages incurred
directly or indirectly from errors, omissions or discrepancies between the equipment described
and the manual.
If you have any comments or suggestions on improving this manual please contact Audiotel at the
following address:
Audiotel International
Corby Road
Weldon
CORBY
Northants
NN17 3AR
Fax: +44 (0)1536 266711
or Email us at: [email protected]
DETECTIV
™
is a registered trademark of Audiotel International Ltd
AUDIOTEL™
is a registered trademark of Audiotel International Ltd
2 AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
DETECTIV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04) 3
How to use this manual..................................................................................4
CE MARK EMC COMPLIANCE AND RADIO TYPE APPROVAL...... 5
INTRODUCTION................................................................. 6
GETTING STARTED - ........................................................ 8
Charging the battery.......................................................................................9
Switching the unit ON (and Off) ...................................................................10
Using the controls and selecting options .....................................................11
Setting time & date ......................................................................................12
BASIC OPERATING METHODOLOGY..................................... 13
DETECT ........................................................................................................13
IDENTIFY......................................................................................................13
LOCATE ........................................................................................................ 13
DETECT MODE ............................................................ 14
Selecting a Detector .....................................................................................15
Setting the unit Volume ................................................................................16
Transmitter Detector Alarms ........................................................................16
NLJD Display................................................................................................17
Enabling / Disabling the NLJD ......................................................................17
IDENTIFY MODE.......................................................... 18
Broadband CW Identify screen.....................................................................18
Broadband Burst IDENTIFY screen ..............................................................19
Harmonic Receiver IDENTIFY screen........................................................... 20
NLJD & Metal Detector IDENTIFY screen ...................................................22
LOCATE MODE ............................................................ 25
EVENT LOG................................................................... 26
Alarms ..........................................................................................................27
Snapshots.....................................................................................................27
References ...................................................................................................28
CONNECTION, DOWNLOAD TO A PC ..................................29
ACCESSORY .................................................................. 30
APPENDIX A - BATTERY & I/O ........................................ 32
APPENDIX B - MENU STRUCTURE..................................... 33
Contents
4 AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
DETECTIV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04) 5
How to use this manual
This manual is divided into a number of sections. The
following brief description shows the type of information
presented in each section:
Introduction to DETECTIV – a brief description of DETECTIV and how it works.
Getting Started - Setting up and looking after your DETECTIV – contains a packing list of
the DETECTIV system. Details of the power requirements and battery care. How to set up
DETECTIV ready for operation.
Basic Operation – describes the basic procedures for using DETECTIV. This is not meant to
be an exhaustive description of DETECTIV's capabilities or functionality, merely a quick guide
to allow basic searches to be carried out. The following Mode sections give more details of the
various modes and their use, in relation to the different detectors.
Detect Mode – describes operating in this mode, which uses all of DETECTIV's detectors
simultaneously, and interpreting the multi-detector display.
Identify Mode – describes how to navigate through the different detector's Identify screens and
how to use them to identify whether or not a detected response is a possible threat.
Locate Mode – this section describes how to use DETECTIV to locate accurately the source of
any identied threat.
Event log – Gives details of the three Logs available within DETECTIV - Alarms, Snapshots and
Reference. How entries are generated and what they are used for.
Connection, download to a PC - gives details of how to connect to a PC and download Event log
information.
Appendices - Reference information about the DETECTIV unit, its component parts, controls
and menu structure.
4 AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
DETECTIV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04) 5
Warnings
When operating the equipment within Europe where Type Approval is a legal requirement, all
equipment, including transmitter, receivers, microphones, batteries and aerials must be to type
approved standard in order for the system to remain type approved. Therefore, only equipment
supplied by Audiotel International should be used.
It is the operator's responsibility to operate the equipment only on frequencies licensed to them.
FCC
NOTE This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not in-stalled and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
CE MARK EMC COMPLIANCE AND
RADIO TYPE APPROVAL
The CE mark is afxed to the DETECTIV to conrm
compliance with the following European Community
Directives:
Council Directive 89/336/EEC on the approximation of
Laws of Member States relating to Electromagnetic
Compatibility and the following EMC and Radio Type
Approval standards:
EN 300 220-1
EN 300 440-1
EN 301 489-3
EN 300 330-1
EN 60950 LVD
6 AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
DETECTIV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04) 7
INTRODUCTION
DETECTIV is a sophisticated search tool integrating four
detection sensors to provide a more complete and robust
method of detecting electronic eavesdropping devices.
Four tried and tested detection methods: Harmonic receiver, broadband detector, Non-linear
junction detector and metal detector are integrated into one compact, easy to use unit.
Combining four complementary sensor systems together means more effective and efcient
search capability. With just one physical sweep of a target area four separate searches are carried
out. DETECTIV automatically switches between the four sensors using each detection method
in turn, ve times a second, allowing a continuous display of all detector activity.
Each sensor provides information which combines to provide a comprehensive picture of
any concealed targets. DETECTIV presents the multisensor information in a simple, easily
understood bar graph display. Additional expert screens give access to more detailed information
for each of the sensors. Using multiple detector information in this way improves detection and
gives more accurate identication between false alarms and real targets.
The Unit
The DETECTIV unit, shown opposite, is a hand-held case with a paddle shaped search head on
an extendable arm. Controls are grouped next to the handle for convenient thumb operation and
information is presented on a tilt-able TFT LCD touch-sensitive screen.
The input and output ports are grouped together under the tail of the unit along with the battery
compartment. The On /Off switch, audio output and headphone socket are conveniently located
at the top of the unit tail.
Handling
The extendable search head contains all the DETECTIV sensors and during a sweep search
needs to be passed close to all parts of a target area. Rotatable on two axis the head can be
twisted to provide the best attitude and position for searching most surfaces. The extendable arm
provides convenient access for the difcult to reach parts of a typical target area, for example,
ceilings and under desks. To minimise strain the unit has provision for a shoulder strap allowing
DETECTIV to be handled like a guitar and is designed to be balanced with the search head arm
extended approximately half way. The tail of the unit is also designed to provide a convenient
handle to control the unit when searching high surfaces.
6 AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
DETECTIV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04) 7
Shoulder strap xing points
(mounted on both left and right sides)
Headphone socket
Battery Comparment
Input/output sockets
Search Head
Extendable Arm
Tiltable LCD touch- sensitive Display
Control keypad
Hand grip
Battery charge indicators
On/Off switch
Loudspeaker
8 AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
DETECTIV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04) 9
Out of the box
DETECTIV can be ordered with a number of accessories. The actual specication of the
accessories will vary from country to country dependent on supply voltage.
The Basic DETECTIV (order no: 2-400-0001) consists of:
DETECTIV unit
Li-Ion battery pack (7.2V)
Multi-media Memory card
DETECTIV manual
The accessories which can be ordered separately are:
Item Order code
Li-ion battery pack 2-400-0002
AC/DC Power adaptor 2-400-0003
Mains power lead (dependent on country)
Shoulder strap 2-400-0005
Pelicase with foam inserts 2-400-0006
Headphones (folding) 2-400-0007
Stand-alone Li-ion battery charger 2-400-0008
Multi-media memory card 2-400-0009
Lightweight carry case 2-400-0012
Test target kit 2-400-0013
GETTING STARTED -
This section covers setting up DETECTIV ready for
operation with a basic description of the controls and how
to use DETECTIV to locate eavesdropping devices.
8 AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
DETECTIV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04) 9
Charging the battery
The DETECTIV battery packs are supplied without being charged. To operate the DETECTIV
you must rst charge the internal battery.
Remove the battery door from the unit and insert the battery, (the end with the four
contacts goes in rst), into the battery compartment.
Replace the battery compartment door and place the unit on charge by connecting an
appropriate AC/DC adaptor to the Charger socket. When successfully connected to a
live power supply the red LED next to the On/Off switch lights to indicate the battery
is being charged.
Note It is not necessary to switch DETECTIV On to charge the battery.
When the battery is fully charged, the red LED turns off and the green LED lights. The unit is now
ready for use.
Battery
The Internal rechargeable Lithium Ion battery pack gives approximately 2 hours continuous use;
Automatically recharged when external power is applied to the DETECTIV via an external AC/
DC Adaptor. Internal protection circuitry protects the battery. If for any reason the battery suffers
any transient fault such as short-circuit, overcharging or deep discharge, the pack will shutdown. It
will remain in this state until reactivated by connection of an external AC/DC Adaptor.
When the battery charge is low a battery icon is displayed on the display screen . This will
indicate there is approximately enough power to keep DETECTIV operating for a further 10
minutes. If the battery is completely exhausted the display will icker and fail.
Inserting the battery
Connecting an AC/DC adaptor
10 AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
DETECTIV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04) 11
Multi-media Memory card
A Multi-media memory card is used to allow screen shots and log information to be stored and
transferred to a PC for further analysis and reporting. DETECTIV can be operated without a
multimedia memory card installed although you will be unable to save screen shots or any log
records.
Note DETECTIV should be off when a ash memory card is inserted into the
memory card slot. The contacts on the memory card should be facing away from
the accessory socket when inserting the Mulitmedia card.
The number of screen Snapshots that can be stored is displayed in a Snapshot counter sc in the
upper section of the display on all DETECT and IDENTIFY screens. If no memory card is installed
the Snapshot counter is crossed out in red sc .
Switching the unit ON (and Off)
To switch the unit ON press and hold the ON / OFF switch for a second or two.
The Unit performs an initialising sequence displaying the message 'Please Wait'.
Note During the initialising sequence the various detectors are calibrated. To ensure the
best performance from DETECTIV the search head should be kept clear of any
potential targets during this calibration.
Once the initialising sequence is completed the Main Menu is displayed.
To switch the unit OFF press and release the On/Off switch.
The back light will turn off immediately although a residual image may linger on the screen for a
few moments.
Inserting a memory card
Card contacts on side away
from accessory socket
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
