Aura OPT7 Bedienungsanleitung
DOOR ASSIST
AUX WIRING
AURATM
INSTALLATION GUIDE
AUX WIRING FOR DOOR/DOME LIGHT
There are two ways theAUX WIRE / Door Assiston theAURA control box can be connected
on the vehicle in order to activate the door assists feature. Door assist allows you to choose
the desire color choice upon selection on the “OPT7 CONNECT” app.
This feature will activate when the AUX wiring is connected to the
positive and negative wiring of dome light or door light.
(*Please check the following wiring diagram before using this function
to prevent incorrect installation)
* NOTE: Trigger wire for door light is recommended if your dome light lights
up progressively when opening door.
DISCLAIMER
Scan for tutorial videos, troubleshooting tips, and more.
OPT7 Lighting is not liable for damages or personal injuries
while installing this product. The Installation Guide is
intended as assistance to reduce setup time. OPT7 Lighting
assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with
aftermarket upgrades, please seek professional assistance.
NEED SUPPORT?
OPT7 recommends installation for safety
and guidance.
Modied installations or installation
recommendations not specied by OPT7
Lighting will void product warranty.
FOR DOOR LIGHT WIRING
(SINGLE AUX WIRE)
OPTION A
STEP 1 STEP 2
AURA PRO
STEP 4
Place the light back in.
STEP 5
Done
STEP 3
On the driver side door, locate
the door/courtesy light. Remove
the plastic cover.
Connect the AUX wire to the positive wire
by twisting the metal wires together for
the door light.
Unplug the connect wire so
you may locate the posive
guage trigger wire.
FOR DOME LIGHT WIRING
(SINGLE AUX WIRE)
OPTION A
STEP 1 STEP 2
STEP 4
Place the light back in.
STEP 5
Done
STEP 3
Connect AUX wire to the positive wire on the Dome light.
STEP 2
AURA PRO
Remove the dome light plastic cover.
Using a screwdriver, remove the two Phillips-head
screws on the cover. Next, remove the dome
light module, locate the power wires.
FOR DOOR LIGHT WIRING
(DOUBLE AUX WIRES)
OPTION B
AURA PROAURA ORIGINAL
STEP 4
Place the light back in.
STEP 5
Done
STEP 3
STEP 1 STEP 2
On the driver side door, locate
the door/courtesy light. Remove
the plastic cover.
AURA ORIGINAL AUX WIRING FOR DOME/DOOR LIGHT
This feature actives white light only.
Connect positive AUX wire to the positive wire
on the door light. Connect negative AUX wire to
the negative wire on the door light.
Unplug the connect wire
STEP 1
STEP 4
Place the light back in.
STEP 5
Done
STEP 3
Connect positive AUX wire to the positive wire on the Dome light.
Connect negative AUX wire to the negative wire on the Dome light.
FOR DOME LIGHT WIRING
(DOUBLE AUX WIRES)
OPTION B
AURA PROAURA ORIGINAL
STEP 2
Remove the dome light plastic cover.
Using a screwdriver, remove the two Phillips-head
screws on the cover. Next, remove the dome
light module, locate the power wires.
AURA ORIGINAL AUX WIRING FOR DOME/DOOR LIGHT
This feature actives white light only.
Inhaltsverzeichnis
Andere Aura Autozubehör Handbücher
