AUSTRALIAN MONITOR AMIS250 Series Bedienungsanleitung

250W, 6 Channel Mixer Amplifier

AMIS250

Description

The AMIS250 is a 6 channel, 250 watt mixer amplifier suitable for rack or desk mounting. The ampli-

fier is a self contained compact unit of solid steel construction.

Inputs

The AMIS250 has six universal input channels with separate level controls. Each channel will accept

balanced or unbalanced microphone, line and auxiliary inputs. The unit has industry standard XLR

microphone sockets and dual RCA auxiliary sockets for each channel. An electronically-balanced

600 ohm telephone input for paging is also provided. An insert point is also featured on the rear

panel for those applications where an additional EQ or feedback exterminator may be required.

Outputs

The AMIS250 features 70 volt and 4 ohm isolated transformer outputs, plus a tape recorder output

by means of dual RCA sockets. A balanced 700mV XLR output is also provided to feed up to 6

power amplifiers.

3 Band EQ

The AMIS250 includes a 3 band equaliser (Bass, Middle and High), giving the user a wider range of

tone controls for high level music or difficult voice applications.

Tone Generator

The AMIS250 comes standard with an in-built four tone generator module. Tones include Bell, Pre-

announce Chime, Alert Tone and Evacuate Tone. Any of these tones may be activated from a sim-

ple contact closure on the rear panel of the amplifier.

Muting

VOX muting is standard on the AMIS250. A mic or line signal on channels 1 or 2 will mute channels

3, 4, 5 and 6. The muting function can be disabled via an internal link.

Phantom Power

Phantom Power (18V DC) is available from all mic inputs. A rear panel phantom power on/off switch

is also provided.

Protection

Internal current limiting protects the amplifier from both overload and overdrive conditions.

Australian Monitor Installation Series amplifiers feature a protection network that provides greater

stability and performance. Our amplifiers are recognised worldwide for their

reliability and this is due to the extensive levels of current limiting which pro-

tect the amplifiers from both overload and overdrive conditions.

Power Output 250 watts RMS

Maximum Load 20 Ohms @ 70 Volts

Power Bandwidth 60Hz - 17kHz (- 3dB)

Frequency Response 60Hz - 23kHz (- 3dB)

Total Harmonic Distortion 0.5% @ 1kHz rated power

Signal To Noise Ratio -74dB with all controls at their centre position

Tone Controls Bass @ 100Hz: Boost +12dB Cut -12dB; Mid @ 600Hz: Boost +12dB, Cut -12dB;

Treble @ 10kHz: Boost +9dB Cut -9dB

Inputs Six mic/aux universal inputs with XLR female mic sockets and dual RCA Phono aux sockets;

600 ohm transformer balanced telephone paging input

Input Sensitivity Mics: 1mV @ 200 Ohms; Aux: 150mV @ 47K Ohms

Outputs Speaker: 70 Volts, 4 Ohms; Tape: 350mV @ 10K Ohms; Line: Balanced 700mV

Phantom Power 18 Volts DC on all Mic inputs

Controls 6 Input channel gain controls, 1 Bass control, 1 Mid Control, 1 Treble control,

1 Master gain control, Phantom Power on/off switch (on rear panel)

Indicators Power ”on“ and ”Protect“ LED

Power Source 120VAC 60Hz 3 pin IEC connector; 24VDC

Power Consumption 400 Watts

Protection Current Limiter protection, plus AC and DC fuses

Dimensions/Weight 3.5" H x 19" W x 13" D (Chassis Dimensions only). 33.1lb

Rack Mounting Standard

Tone Generators Built-in four tone generator module.

Includes Bell, Pre-Announce, Alert and Evac Tones

Muting Built-in VOX muting. Channels 1 and 2 will mute channels 3, 4, 5 and 6

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

The mixer amplifier shall have six universal inputs each comprising of a balanced microphone with XLR

female sockets and an auxiliary input using dual RCA sockets. A balanced XLR output to drive additional

power amplifiers shall also be provided.

The amplifier master section shall include one master gain control, three EQ controls, one with 12dB of cut

and boost at 100Hz, one with 12dB cut and boost at 600Hz and the other with 9dB of cut and boost at

10kHz. Speaker outputs shall be transformer isolated at 70 volt and 4 ohms. The amplifier must be capable

of delivering 250 watts RMS into a 20 inductive ohm load, with less than 0.5% distortion measured at 1kHz

and with system hum and noise less than -74dB.

The amplifier shall be an Australian Monitor Installation Series model AMIS250.

UL APPROVED

PO Box 3126, Lynnwood, WA 98046 • Voice: 425-673-5175 • Fax: 425-673-7825

• Website: www.australianmonitor.com • Email: sales@australianmonitor.com

AUSTRALIAN MONITOR AUDIO INC.

Andere Handbücher für AMIS250 Series

Inhaltsverzeichnis

Andere AUSTRALIAN MONITOR Verstärker Handbücher

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AM2200NG Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR IS1200 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS1202P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMB600 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR KA1200 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMC120 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AM1200 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM250P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AM2400 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS26 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMC120 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR DCM120 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR CONTRACTOR Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR SY2200 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AM1600 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMD2100P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS60 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS250 Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ESP Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM120P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR KA1500 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR OPAL Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AV2.2P Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung