Autel MaxiIM TOYOTA 8A BLADE KEY Bedienungsanleitung

Andere Handbücher für MaxiIM TOYOTA 8A BLADE KEY

1

Andere Autel Autozubehör Handbücher

Autel

Autel Maxi US AC W12-H Bedienungsanleitung

Autel

Autel MaxiCharger AC Wallbox Home Bedienungsanleitung

Autel

Autel ATS100 Bedienungsanleitung

Autel

Autel APB112 Bedienungsanleitung

Autel

Autel MaxiCharger DC Fast Bedienungsanleitung

Autel

Autel MaxiTPMS TS508 Bedienungsanleitung

Autel

Autel MaxiVCI V150 Bedienungsanleitung

Autel

Autel MaxiIM TOYOTA 8A BLADE KEY Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung

IMPORTANT

1. Please ensure that the Autel IMMO tablet is connected to the Internet when using the All

Keys Lost function.

2. After the function is completed, please restore the original vehicle circuit to avoid vehicle

fault.

3. For other models, please check and follow the operation guides and wiring diagrams in their

respective menus.

TOOLS YOU NEED

Toyota 8A Blade AKL Kit

Autel MaxiIM IMMO Tablet (IM508/IM608/MaxiSys IM)

G-BOX/G-BOX2

APB112 Smart Key Emulator

TOYOTA 8A BLADE AKL KIT

STEPS

1. Power on the tablet, tap [IMMO] on the tablet, and select one by one [Toyota] –[Manual

Selection] –[Camry] –[2015-] –[Blade Key] –[Control Unit] –[Immobilizer (H 8A/8E)] –

[All Keys Lost].

2. Find the fuse box near the vehicle’s DLC, remove the IGN_NO.1 fuse from the designated

fuse slot (see the picture below) on the fuse box, and connect the IGN FUSE to this fuse slot.

3. Open the hood, find the fuse box in the engine compartment. Remove the BAT_NO.1 fuse

from the designated fuse slot (see the picture below) on the fuse box, and connect the B+

FUSE to this slot.

4. Remove the steering wheel cover, pull out the KSW_NO.1 ignition switch wire harness as

shown below and connect the KSW wire harness to the ignition coil.

5. Connect the G-BOX to the 8A AKL cable and then to the vehicle’s DLC. Tap [OK] on the

tablet to continue.

6. G-BOX will be automatically updated when connected to the tablet for the first time. The status

indicator of G-BOX will flash red during updating process, and light green after update

succeeds.

7. Insert a blade key (without chip) and turn ON the ignition.

8. Tap [OK] on the tablet to read the critical data. Data reading time varies from several seconds

to several minutes, depending on the specific vehicles.

9. Tap [OK] to confirm the key type (SLK6) displayed on the screen.

10.Connect APB112 to the IMMO tablet using the USB cable. Once connected, the status

indicator will light steady blue, indicating it is working properly. Tap [OK] to obtain key

information.

11.APB112 will be automatically updated when doing 8A Key All Keys Lost for the first time.

12.The simulator key is successfully generated.

13.Turn OFF the ignition, pull out the key blade. Pull out the B+ Fuse, IGN Fuse and KSW and

restore the vehicle circuit.

14.Ensure the IMMO tablet is connected to the vehicle’s DLC. Put APB112 close to the ignition

coil, insert the blade key (without chip) and turn ON the ignition.

15.Tap [OK] to establish vehicle communication. Turn OFF the ignition, remove APB112 and pull

out the key blade.

16.Insert a key (with chip) and ensure the ignition is OFF.

17.Wait for 5 to 180 seconds. The key learning is completed when the immobilizer warning light is

off.

18.Use the new key to start the engine, to check if the new key functions.