Autonics KT-502H Bedienungsanleitung

KT-502H

G-2

• HART protocol

• 330° rotatable display for environment conditions

• DC4-20mA analog output (2-wire)

• Various input (order 1 input type among 22 types)

RTD: 8 types, Thermocouple: 8 types,

mV: 4 types, Ω: 2 types

• Backlight helps to read easily in the darkness

• Explosion class: Ex d IIC T6

• Protection structure: IP67 (IEC standard)

502H 0KT

Model KT-502H

Power supply 10.5-45VDC (with backlight LCD)

Display method

PV display part: 7-segment 5-digit (character size: W4×H8mm),

Parameter display part: 14-segment 8-digit (character size: W2.6×H4.8mm),

52-bar meter

Display range -19999 to 99999

Setting method HART-protocol (no setting key)

Response time 1 sec

Input type

RTD DPt100Ω, DPt500Ω, DPt1000Ω, Ni100Ω, Ni500Ω, Ni1000Ω, Cu50Ω, Cu100Ω

Thermocouple K, J, T, E, N, S, B, R

Resistance transmission (Ω) 0 - 400Ω, 0 - 2000Ω

Voltage transmission (mV)

10 - 75mV,

100 - 100mV,

100 - 500mV,

100 - 2000mV

Output DC4-20mA (2-wire)

Accuracy ±0.3%

Alarm Below 3.8mA, Over 20.5mA/Sensor break 3.6mA

Load Max.(V power supply - 7.5V)/0.22A

Galvanic insulation 2kVAC(input/output)

Environ-

ment

Ambient temperature -20 to 70℃, storage: 20 to 80℃

Ambient humidity 0 to 85%RH, storage: 0 to 85%RH

Explosion class Ex d IIC T6

Protection structure IP67 (IEC standard)

Material Body: Aluminum (AlDc.8S), Cover O-Ring: Buna N

Weight※1 Approx. 1.4kg (approx. 1.2kg)

Features

Please read “Caution for your safety” in operation manual

before using this unit.

Ordering Information

Specications

※1: The weight includes packaging. The weight in paranthesis is for unit only.

※Environment resistance is rated at no freezing or condensation.

Item Description

①Mounting bracket 0 Without bracket 1 With bracket

②User temperature range 1: To order this unit, write the temperature sensor type and the temperature range.

(-270 to 1372, K)※1

① ②

Hart Field Communications Protocol may depend on several factors,

including calibrators, software, or 󰘰rmware updates.

Temperature Transmitter

G-3

A. Recorder

B. Indicator

C. Converter

D. Controller

E. Thyristor

unit

F. Pressure

transmitter

G. Temp.

transmitter

H. Accessories

KT-502H

(unit: mm)

● Mounting bracket

Ø83

142

2-(1/2 14NPT)

Input type Input range(℃) Input range(℉)

RTD

DPt100Ω 200 to 850 328 to 1562

DPt500Ω 200 to 250 328 to 482

DPt1000Ω 200 to 250 328 to 482

Cu50Ω 50 to 150 58 to 302

Cu100Ω 50 to 150 58 to 302

Ni100Ω 60 to 180 76 to 356

Ni500Ω 60 to 180 76 to 356

Ni1000Ω 60 to 150 76 to 302

Resistance

transmitter Resistance (Ω)

0 to 400Ω

0 to 2000Ω

Thermocouple

(PtRh30-PtRh6) 0to 1820 32 to 3308

E(NiCr-CuNi) 270 to 1000 454 to 1832

J(Fe-CuNi) 210 to 1200 346 to 2192

K(NiCr-Ni) 270 to 1372 454 to

2501.6

N(NiCrSi-NiSi) 270 to 1300 454 to 2372

R(PtRh13-Pt) 50 to 1768 58 to

3214.4

S(PtRh10-Pt) 50 to 1768 58 to

3214.4

T(Cu-CuNi) 270 to 400 454 to 752

Analog Voltage

10 - 75mV

100 - 100mV

100 - 500mV

100 - 2000mV

● Opening cover

Dimensions

ConnectionsInput Type And Range

To open the cover,

unscrew the M3×6L

headless bolt using a 1.5

hexagon wrench and rotate

the cover.

Mounting bracket

200

DN50

(2B Pipe)

HART Communicator

Power

Supply

Indicator

Recorder

DCS

Controller

123456

Power supply

10.5-45VDC

A B b

RTD

Min. 250Ω

KT-502H

G-4

Fid dev output 20.000

mA equal to reference

meter ?

1. Yes

2. No ABORT ENTER

NOTE-Loop may be

returned to automatic

control

ABORT O K

Device Disconnected

RETRY QUIT

1. Ofine

2. Online

3. Frequency Device

4. Utility

Setting d dev.

output to 20mA

ABORT O K

Enter meter Value

20.000

HELP DEL ABORT ENTER

Diag/Service

1. Test device

2. Loop test

3. Calibration

4. D/A trim

HELP SAVE HOME

⑫Press the (F4) key.

⑬Press the (F3) key.

⑭Press the (F3) key.

⑮Press the (F3) key to complete the adjustment.

⑪If output display value is correct, select '1. Yes' and press

the (F4) key. If not, select '2. No' and press the

(F4) key and re-set the display value.

⑨Press the (F4) key.

⑩Press the (F4) key to set 20 mA display value.

Current Trim Adjustment

1. Device Setup

2. PV

3. PV Ao

4. PV LRV

5. URV

1. Process Variables

2. Diag/Service

3. Basic Setup

4. Detailed Setup

5. Review

1. Test device

2. Loop test

3. Calibration

4. D/A trim

Connect reference

meter

ABORT O K

Fid dev output 4.000

mA equal to reference

meter ?

1. Yes

2. No ABORT ENTER

Enter meter Value

4.000

HELP DEL ABORT ENTER

Setting d dev

output to 4mA

ABORT O K

WARN-Loop should be

removed from

automatic control

ABORT O K

①Select the '1. Device Setup' by , keys and press the

key.

Connect a HART communicator and adjust current trim as below by a HART communicator.

②Select the '2. Diag/Service' by , keys and press the

key.

③Select the '4. D/A trim' by , keys and press the key.

④Press the (F4) key.

⑤Press the (F4) key.

⑥Press the (F4) key.

⑦Press the (F4) key to set 4 mA display value.

⑧If output display value is correct, select '1. Yes' and press

the (F4) key. If not, select '2. No' and press the

(F4) key and re-set the display value.

Ex)If output display value is 3.89mA, select 3.89 and press

the (F4) key.

Temperature Transmitter

G-5

A. Recorder

B. Indicator

C. Converter

D. Controller

E. Thyristor

unit

F. Pressure

transmitter

G. Temp.

transmitter

H. Accessories

KT-502H

Temperature Range Setting Error Display And Troubleshootings

1. PV LRV

2. URV

HELP HOME

②Select '1. PV LRV'(Low temperature range) and

press the key.

PV LRV

0.000 deg C

0.000

HELP DEL ESC ENTER

③Set Low temperature range and press the (F4) key.

PV URV

100.000 deg C

100.000

HELP DEL ESC ENTER

⑤Set High temperature range and press the (F4) key.

1. PV LRV 0.000 deg C

2. URV 100.000 deg C

HELP SEND HOME

⑥When the set temperature range is correct,

press the (F2) key.

1. PV LRV

2. URV

HELP HOME

④Select '2. URV'(High temperature range) and

press the key.

Online (Generic)

1. Device Setup

2. PV

3. PV Ao

4. PV LRV

5. URV SAVE

①Press the key for 3 sec.

Select the '4. PV LRV' by , keys and press the key.

- WARNING -

Pressing ' OK ' will

change device output

put 100P in manual

⑦Press the (F4) key.

- WARNING -

Return control 100P

To automatic control

O K

⑧Press the (F4) key.

1. PV LRV 0.000 deg C

2. URV 100.000 deg C

HELP HOME

⑨Check the set temperature range. Press the (F3)

key. HART communication is OFF.

• For connecting the power, use a crimp terminal

(M3.5, max. 7.2mm).

• The connection of this unit should be separated from

the power line and high voltage line in order to prevent

inductive noise.

• Install a power switch or a circuit breaker to supply or cut

off the power.

• Switch or circuit breaker should be installed nearby

users for convenient control.

• Do not use this unit near the high frequency instruments

(high frequency welding machine & sewing machine,

large capacity SCR controller).

• Installation environment.

①Indoor / Outdoor

②Altitude max. 2,000m

③Pollution degree 2

④Installation category Ⅱ

• Use the veried explosion-proof electric connection

(cable gland or sealing tting)

(explosion proof standard: over Ex d IIC T6,

IP rating: over IP67 protection structure).

• Use the dedicated external terminal for earth. For

connecting earth, use a spring washer and earth cable

which is over 4mm2.

• We are not responsible for any damages and claims

for careless. Must read the cautions for your safety

and using.

• This explosion-proof unit is certied and the same

specications which is reported to Korea Gas Safety

Corporation.

• If there are any problems with the unit, contact the

head ofce.

• Failure to follow these instructions may result in

product damage.

Cautions During Use

Proper Usage

Connect a HART communicator and set temperature range as

below by a HART communicator. Display Error Troubleshooting

ERR05

Temperature sensor

A, B or all sensors are

disconnected. Check the temperature

sensor.

ERR06 Temperature sensor B

is disconnected.

ERR07

When PV is lower than

the low-limit value of set

temperature range.

Check low-limit value

of the set temperature

range.

ERR08

When PV is higher than

the high-limit value of

set temperature range.

Check high-limit value

of the set temperature

range.

Andere Autonics Messgerät Handbücher

Autonics

Autonics MP5M4N Bedienungsanleitung

Autonics

Autonics MX4W Series Bedienungsanleitung

Autonics

Autonics AFL Series Bedienungsanleitung

Autonics

Autonics MP5S Series Bedienungsanleitung

Autonics

Autonics MT4N Series Bedienungsanleitung

Autonics

Autonics M4Y Series Bedienungsanleitung

Autonics

Autonics MP Series Gebrauchs- und Pflegehandbuch

Autonics

Autonics BL Series Bedienungsanleitung

Autonics

Autonics PSQ Series Bedienungsanleitung

Autonics

Autonics MP-XGT Montageanleitung

Autonics

Autonics krn100 series Bedienungsanleitung

Autonics

Autonics MT4Y Series Bedienungsanleitung

Autonics

Autonics krn100 series Bedienungsanleitung

Autonics

Autonics MT4W Series Bedienungsanleitung

Autonics

Autonics PSM Series Gebrauchs- und Pflegehandbuch

Autonics

Autonics krn100 series Bedienungsanleitung

Autonics

Autonics M4V Series Bedienungsanleitung

Autonics

Autonics KN-1000B Series Bedienungsanleitung

Autonics

Autonics KRN1000 Series Bedienungsanleitung

Autonics

Autonics PSAN Series Bedienungsanleitung

Autonics

Autonics KRN1000 Series Bedienungsanleitung

Autonics

Autonics MP5S Series Bedienungsanleitung

Autonics

Autonics M4N Series Bedienungsanleitung

Autonics

Autonics M4M Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung