Autopilot ColorMFA Bedienungsanleitung

ColorMFA

2020

OPERATION MANUAL

firmware v2.9.4_b31

www.colormfa.ru

ColorMFA Manual, firmware v2.9.4_b31



Main Screen ..................................................................................................................................................................................................................2

Top display area

..........................................................................................................................................................................................2

Middle display area

..................................................................................................................................................................................... 2

Messages display area

...............................................................................................................................................................................4

Bottom display area

.................................................................................................................................................................................... 4

Navigation info

............................................................................................................................................................................................5

Hot keys and buttons

.................................................................................................................................................................................6

Main menu.....................................................................................................................................................................................................................6

Menu structure

............................................................................................................................................................................................ 7

Measure

.........................................................................................................................................................................................................8

Trip data 1

............................................................................................................................................................................................... 8

Trip data 2

............................................................................................................................................................................................... 8

Summary

................................................................................................................................................................................................. 8

Extended info

......................................................................................................................................................................................... 9

Oil level

.................................................................................................................................................................................................... 9

Torque

.................................................................................................................................................................................................... 10

Acceleration

.......................................................................................................................................................................................... 11

Graphs

.................................................................................................................................................................................................... 11

Gauges

................................................................................................................................................................................................... 12

Settings

Speed Limiter

....................................................................................................................................................................................... 13

ECO mode

.............................................................................................................................................................................................. 13

Trip Computer

...................................................................................................................................................................................... 14

Calibration

............................................................................................................................................................................................ 14

Battery voltage

.................................................................................................................................................................. 14

Speed Source

...................................................................................................................................................................... 14

Speed

..................................................................................................................................................................................... 15

Consumption

....................................................................................................................................................................... 15

Boost range

......................................................................................................................................................................... 15

Gear ratios

........................................................................................................................................................................... 16

Gearbox mode

..................................................................................................................................................................................... 16

Gearing assist.

..................................................................................................................................................................................... 16

Navigation

............................................................................................................................................................................................. 17

Design

Background

......................................................................................................................................................................... 17

Main color

............................................................................................................................................................................ 17

Main screen

......................................................................................................................................................................... 18

Effects

................................................................................................................................................................................... 18

Start Logo

............................................................................................................................................................................ 19

Poweroff

............................................................................................................................................................................... 19

Backlight

.............................................................................................................................................................................. 20

Car image

............................................................................................................................................................................. 20

Coffee break

......................................................................................................................................................................................... 21

Others

Diagnostic

................................................................................................................................................................................................... 22

> Selected ECU

.................................................................................................................................................................................... 22

Meas.Blocks

.......................................................................................................................................................................................... 23

Read Faults

........................................................................................................................................................................................... 24

Clear faults

............................................................................................................................................................................................ 25

Messages

System

Language

............................................................................................................................................................................................... 25

Units

TPMS

CAN-monitor

........................................................................................................................................................................................ 27

MotorInfo

.............................................................................................................................................................................................. 27

Firmware

............................................................................................................................................................................................... 27

Service

Reset

Settings

.................................................................................................................................................................................................. 28

Indication of open doors.......................................................................................................................................................................................... 29

Messages (Errors and Warnings)........................................................................................................................................................................... 29

Launch control............................................................................................................................................................................................................ 30

ColorMFA Manual, firmware v2.9.4_b31



Main Screen

Main screen visually divided into 4 areas:

- Top display area: for indication of OEM Radio system information or two

custom chosen parameters.

- Middle display area: for indication of main car parameters or navigation info.

- Message display area: for indication of current messages (Errors and Warn-

ings) or «OK» in case everything is fine.

- Bottom display area: Gear box status (Selected gear, shift light or mode) in

center and custom chosen parameters on the left and on the right.

Main screen controlled by OEM wiper stalk buttons: “Up”, “Down” and “Reset”. Using but-

tons “Up”, “Down” changes parameters in Middle display area, press “Reset” button to show Main

menu or switch to Navigation info screen (see clause Navigation info)

Top display area

In the top display area, it is possible to show data from OEM radio system / phone (when

connected via CAN bus only) or two additional parameters at the user's choice (selecting param-

eters

Menu -> Settings -> Design -> Main screen

)

Middle display area

It is possible to show the following data in the middle display area which can be cycled

through:

ColorMFA Manual, firmware v2.9.4_b31





Travelled time

Travelled time in current trip. Timer starts when ignition is turned on on. Automat-

ically reset to zero when ignition is off for more than 1 hour.



Average speed.

Average speed in current trip. Automatically reset to zero when ignition is off for

more than 1 hour.



Current speed.

Current speed indication could be in two font size: Big digits or the same as other

parameters (you can choose font size of current speed in Settings).



Current consumption.

Automatically reset to zero in case of ignition off more than 1 hour.



Average consumption.

When current speed is less than 5 km/h data is shown in liters per hour (l/h).

When current speed is more than 5 km/h data is shown in liters per 100 km

(l/100km).

(Shown units depends on Settings).



Torque

Show torque which is calculated by Engine ECU.



Battery voltage.



Engine oil level



Engine oil temperature



Air intake temperature.



Engine coolant temperature.



Boost pressure (for turbo-engines).

Boost pressure indication requires additional wiring!



DTE (Distance to Empty)

Calculated distance which could be covered on remaining fuel in the tank.



Remaining fuel in the tank.



Travelled distance.

Automatically reset to zero when ignition is off for more than 1 hour.



Outside Temperature

You can choose displayed/hidden for any of above parameters in Settings (

Menu -> Set-

tings-> Trip computer

If the car has cruise control, then when activated, the middle display area indicates the

cruise mode and the specified speed (Set speed). The cruise icon is displayed in green when

active or in gray if the cruise is temporarily deactivated (standby).

ColorMFA Manual, firmware v2.9.4_b31



Messages display area

If there are errors or warnings diagnosed by ColorMFA in the car, the icons are displayed

in the message display area reminding the user of present faults or warnings. By default, the

icons flash, so that the user pays attention to presence of errors or warnings. Blinking can be

switched off in the settings (

Menu -> Settings -> Other).

In the absence of any errors and no warnings there is "OK" displayed in this area.

Bottom display area

In the center of the bottom display area, the current transmission gear or the operating

mode of the gearbox is displayed. Indications of proper gear number is available for manual

gearbox when the transmission ratio values are correctly specified in the settings (

Menu -> Set-

tings -> Calibration -> Gear ratios

) and for the automatic gearbox. For the automatic gearbox,

you can select the display mode (

Menu -> Settings -> Gearing assist.

If the automatic transmission has faults (errors), the data is highlighted in red and

flashes to attract attention.

Parameters on the left and on the right side of this area can be configured in

Menu ->

Settings -> Design -> Main screen

For cars equipped with a gearbox with a low range option, the low range and emergency

/ warning mode is displayed. Turning on the lowered range gearing is indicated by an ordinary

inscription. In case of a malfunction or an unacceptable mode of operation, the inscription blinks.

ColorMFA Manual, firmware v2.9.4_b31



Navigation info

If you have data from a regular navigation system, the green "NAVI" appears on the main

screen in the upper right corner of the middle area.

To enter the navigation display mode, press the "Reset" button and hold it for about 2

seconds. Returning from the navigation display back to the normal mode is also carried out by

holding the "Reset" button. When in the navigation display mode, if the standard navigation stops

displaying the data on the screen, the transition back to the normal mode is carried out automat-

ically. If, at the same time, the navigation resumes the data transfer, then the return to the

navigation display mode will also happen automatically.

The navigation info display can be enabled or disabled in the menu (Menu->Settings-

>Navigation). It is also possible to enable the mode in which the navigation data will be displayed

automatically (immediately) as soon as navigation info is available, without additional holding of

the "Reset" button.

Depending on the instrument panel in which the ColorMFA is installed, it is possible to

display navigational data in both monochrome mode (installation in a factory monochrome dash-

board) and in color mode (installation in a factory color instrument panel).

ColorMFA Manual, firmware v2.9.4_b31



Hot keys and buttons

On the Main Screen you can you use the following control buttons inputs:

- Short press «Up»: Cycle the parameters in middle display area to right.

- Short press «Down»: Cycle the parameters in middle display area to left.

- Short press «Reset»: Enter to Main Menu

- Long press (hold) «Reset»: Switch to Navigation screen (if navigation data is available)

- Long press (hold) «Down»: Disable/Enable ColorMFA screen (turns LCD off so center of

instrument cluster is completely black)

- Long press (hold) «Up»: fast mode to backlight change (works in manual backlight mode

only Menu->Settings->Design->Backlight).

In this mode, backlight can be changed by «Up»and «Down»buttons to adjust value. This

mode is disabled automatically after no button press for 3 seconds.

Main menu

To enter to Main Menu, short press the "Reset" button.

Navigation through the menu is carried out using the "Up" and

"Down" buttons, selecting the menu item or changing / applying the pa-

rameter is done by pressing the "Reset" button. The current menu item is

highlighted in red (or main color selected in settings).

Some of menu items may be missing depending on the vehicle

and the ColorMFA firmware version.

ColorMFA Manual, firmware v2.9.4_b31



Menu structure

Measure

Trip data 1

Trip data 2

Summary

Extended info

Oil level

Torque

Acceleration

Graphs

Gauges

Back

Settings

Speed limiter

ECO mode

Trip computer

Calibration

Battery voltage

Speed Source

Speed

Consumption

Boost range

Gear ratios

Back

Gearbox mode

Gearing assist.

Navigation

Design

Background

Main color

Main screen

Effects

Start logo

Poweroff

Backlight

Car image

Back

Coffee break

Other

Back

Diagnostic

> Selected ECU

ECU List

Meas.Blocks

Read faults

Clear faults

Back

Messages

System

Language

Units

CAN-monitor

Screensaver

MotorInfo

Firmware

Back

Service

Reset

Settings

Back

Exit

ColorMFA Manual, firmware v2.9.4_b31



Measure

Trip data 1

Trip data 2

Summary

The current travel data of trip computer is indicated in «

Trip data 1

». Values automatically

reset to zero when ignition is off (including car is in safe mode) for more than 1 hour. You can

manually reset the data by selecting «

Clear

». «

Trip data 1

»indicates the average values gath-

ered during the total of the current trip but no previous trips.

There’s accumulated travel data of the trip computer indicated in «

Trip data 2

». These

values will not automatically reset to zero. You can manually reset the data by selecting «

Clear

».

Values will reset to zero in the event of a data overflow. «

Trip data 2

»indicates the average

values gathered from last 5 trips.

The

"Summary"

screen displays a summary of the data with key data/parameters like

RPM, temperatures, battery voltage, etc. The

"Statistics"

screen displays data based on «

Trip

data 1

»and «

Trip data 2

».

ColorMFA Manual, firmware v2.9.4_b31



Extended info

There is extended information from engine ECU indicated in the

screen. This screen is available for vehicles with modified (tuned) firm-

ware of the engine ECU only.

Oil level

If the vehicle equipped with oil level sensor (in engine pan), current

and calculated level data are displayed.

The left scale displays the current instantaneous oil level in the en-

gine pan. The value measured by the sensor at the current time is dis-

played. On some types of engines, the minimum permissible level is also

displayed in the form of a yellow line.

The right scale shows the calculated oil level as if you are looking

at the dipstick. From the value "MIN" to "MAX". Each time the hood is

opened, the calculated value is reset. To resume the data display you

need to drive about 50 km.

Inhaltsverzeichnis

Andere Autopilot Autozubehör Handbücher

Autopilot

Autopilot K15 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung