Autoslide MultiDrive Bedienungsanleitung
MultiDriveTM
Installation instructions
© 2018 Autoslide Pty Ltd 2
Contents
The MultiDrive 3
Repairs and returns 3
Questions and comments 3
Warranty 3
About the MultiDrive 5
What’s included 6
Door requirements 8
Sliding door friction 8
Space under the transom 8
Coating the cover 9
Installation instructions 10
1. Cut parts to size 10
2. Attach parts to the base 12
3. Attach the base to the door 22
4. Attach the brackets and cover 24
5. Install the mode pad 27
Programming the controller 30
1. Learn wireless inputs 30
2. Set DIP switches 31
3. Set the controller for pets 32
4. MultiDrive mode settings 32
© 2018 Autoslide Pty Ltd MultiDrive 3
The MultiDrive
This document explains how to assemble the MultiDrive automatic door opening
system. It is important to follow these instructions closely.
Repairs and returns
Contact us by either:
Email: [email protected]
Web: www.autoslide.com
Phone:
–(833) 337-5433 (USA)
–1 300 288 675 (Australia)
Questions and comments
If you have questions about installation, programming, or operation
of your MultiDrive or about any parts or accessories, email us at
Warranty
The MultiDrive is produced by Autoslide Pty Limited and is subject
to the following warranty and conditions of operation. The product
is warranted against failure due to faulty material or workmanship
for a period of 24 months from date of purchase. This warranty will
cover the repair or replacement of any defective parts at an
authorized Autoslide Pty Limited facility and is subject to the
following conditions, provided that:
•the MultiDrive is fitted to a sliding door strictly following the
supplied instructions, and
•the sliding door slides within the friction limits specified in the
instructions, and
•the MultiDrive is for residential and light traffic commercial
applications (ie. doctor’s office, hotel room, etc.), and
•the warranty is limited to an amount totaling no more than the
unit cost price.
This warranty shall be null and void and to no effect if:
•the MultiDrive is abused or in any way used outside the limits
of the specification and design, or
•the electric wiring has been interfered with and is not wired in
accordance with the original factory settings, or
•defects are not caused by normal wear and tear, or
•the purchaser in any way alters the MultiDrive, or adds or
removes parts or materials of the MultiDrive, or
© 2018 Autoslide Pty Ltd MultiDrive 4
•the purchaser fails to notify Autoslide Pty Limited immediately
if there is a failure of any component.
Conditions:
•Delivery costs of all warranty items will be covered by
Autoslide Pty Limited for the first 90 days from purchase. After
90 days, delivery costs of warranty items will be at the
purchaser’s expense.
•The purchaser will be responsible for inspecting the MultiDrive
package to ensure that the package is complete and not
damaged and that all parts are present.
•The buyer shall immediately notify Autoslide Pty Limited in
writing or by phone about any defect in the goods.
•In the event a MultiDrive unit is returned to Autoslide Pty
Limited for a warranty claim, the MultiDrive unit must be
received free from damage.
•The purchaser expressly acknowledges and agrees that
Autoslide Pty Limited is not liable for any advice given by its
agents in relation to the suitability of the product or its
application to certain doors and such advice is relied upon at
the purchaser’s risk.
•The buyer shall not carry out any remedial work on the alleged
defective goods without first obtaining the written consent and
instruction from Autoslide Pty Limited.
•The warranty on any battery is subject to the warranty provided
by the original manufacturer of the battery. Two year
© 2018 Autoslide Pty Ltd MultiDrive 5
About the MultiDrive
The MultiDrive is an automatic door opening system for
residential and light-use commercial sliding doors.
Once installed, the MultiDrive mechanism is hidden discretely
behind an aluminum cover which blends in with the sliding door
frame. This cover comes in a mill finish and will need to be powder
coated to match the door and/or frame.
The MultiDrive can be retro-fitted to any framed sliding door,
including bi-parting doors (Figure 1) and non-bi-parting doors
(Figure 2).
Figure 1: Bi-parting doors with the MultiDrive.
a) b)
c) d)
Figure 2: Non-bi-parting doors with the MultiDrive: a) single left-
sliding door, b) telescopic left-sliding door, c) single right-sliding
door, and d) telescopic right-sliding door.
Warnings
•Any manual lock on the sliding door should be removed or
deactivated, otherwise the MultiDrive may be damaged if
activated while the lock is closed.
•The MultiDrive should not be used in high-traffic
environments such as large office building entrances or big-
box stores.
•The MultiDrive may be used in light commercial
environments. Speak with an authorized Autoslide Pty
representative about your application prior to purchase.
© 2018 Autoslide Pty Ltd MultiDrive 6
What’s included
Base
x 1
Cover
x 1
AC adapter
x 1
Controller
x 1
Motor
x 1
Belt
x 1
Top bracket
x 1
© 2018 Autoslide Pty Ltd MultiDrive 7
Bottom
bracket
x 1
Cover clip
x 2
Belt
tensioner
x 1
End cap
x 2
Cable cover
x 3
Mode pad
x 1
Screw
Packet
x 1
Tool Packet
x 1
Wall Button
X 2
© 2018 Autoslide Pty Ltd MultiDrive 8
Door requirements
Sliding door friction
The MultiDrive should only be installed on a door that slides
smoothly. If the door system does not, it is recommended to have
the door system maintenance prior to the installation of the
MultiDrive System.
The sliding friction should be low enough that the door opens and
closes with a force less than 35 pound-force plus (155 newtons)
at a steady sliding speed of about 4”/second (100 mm/second).
Use a digital scale with a hook to measure the force to open and
close the door. If the force is greater than 35 pound-force, speak
with an authorized Autoslide Pty representative on how to proceed.
Space under the transom
The MultiDrive system sits directly below the head space of a
sliding door and requires a vertical space of 3.15”(80 mm) –see
Figure 3.
The MultiDrive may also be mounted in a flush mount, if the
situation arises.
Figure 3: Cross-section of a sliding door (1) with the MultiDrive below
the transom (2). The MultiDrive requires a 3.15-inch (80-mm)
clearance below the transom.
1
2
3.15”
(80 mm)
© 2018 Autoslide Pty Ltd MultiDrive 9
Coating the cover
The MultiDrive includes a cover to conceal the motor and other
mechanisms.
The cover has an uncoated aluminum mill finish. To make the
cover match the sliding door, use a color sample from the door
and/or door trim to match the cover with the door system. The
painting of the cover should be powder coated for optimal durability
and finish.
Leave spare material to hold the ends of the cover during the
coating process.
© 2018 Autoslide Pty Ltd MultiDrive 10
Installation instructions
1. Cut parts to size
(a) Check the MultiDrive fits
a) b)
Figure 4 Examples of a) sufficient space for the Multidrive, b)
insufficient space.
Is there a 3.15-inch (80-mm) space below the transom?
•If yes, the MultiDive should fit. Go to the next step (b).
•If no, see below.
Steps
a) b)
Figure 5: .
3.15”
80 mm
✓
3.15”
80 mm
3.15”
(80 mm)
< 0.08”
(< 2 mm)
Inhaltsverzeichnis
Andere Autoslide Türöffnungssystem Handbücher
