AVer VC520 Pro Bedienungsanleitung



VC520 Pro Conference Camera

Quick Installation Guide

Package Contents

Camera Unit Speakerphone Unit Remote Controller Power Adapter

Power Cord*

USB 3.0 Cable Camera Cable

(10 m)

Speakerphone

Cable (10 m)

3.5 mm Audio

Cable (0.9m)

L-Mount

Bracket





Screws for

Mount Drilling Paper Quick Guide Warranty Card AAA Batteries





*The power cord will vary depending on the standard power outlet of the country where it is sold.

More Help

For FAQs, technical support, software and user manual download, please visit:

http://www.averusa.com.

Overview

2 3 4 5 6 7 8



1 Status LED 5 RS232 in/out port

2 IR sensor 6 Ethernet port

3 Speakerphone port

(Blue cable)

7 DC 12V power jack

4 USB3.1 Type B port 8 Kensington Lock

91011 12 13



9 Speakerphone port

(For extended speakerphone

and microphone connection/

Red cable)

Line out port

Camera port

(Blue cable)

Kensington Lock

10 Phone in port



Installation

1. Connect the camera to power outlet.

Power cord

Power adapter

2. Connect the camera to the

speakerphone using the included

compatible cable.

[Note]

Both speakerphone and camera port are

marked in blue.

The back cover of the speakerphone will

need to be removed to connect the

speakerphone cable.

Speakerphone

cable

3. Connect other necessary cables.

[Note]

USB and RS232 cable need to secure the

cable with attached screw.

Make sure the cable is well connected to

the connector on the camera before

securing the cable.



4. Connect the camera to the computer.

[Note] Use the USB 3.0 cable that is included

in package.

USB cable

Remote Controller

Camera Select

Camera Directional

Control

OSD Menu**

SmartFrame

Zoom In/Out

Preset

Call/Answer*

Brightness -

Enter**

Mute/Un-mute

VolumeUp/Down

PresetHotKey

PresetPosition

HangUp*

Brightness+

*Function requires AVer PTZApp

**Not supported for VC520 Pro

Camera Select: If you only have one camera and don’t need to adjust custom settings, the

default is camera 1. If you press camera 2 or 3 on the remote control, you will find your remote

can’t control your camera. In this case, please press camera 1 on your remote again.

SmartFrame: Press for 1 second to switch the SmartFrame function between auto and manual

Press and hold the number button “ ” to turn on or off the WDR function.

AAA Batteries (required)



Wall Mount Installation

1. Use the drilling paper included in the package to drill the holes in the wall where the user wants

to mount the camera.

2. Use the screw to secure the

L-mount bracket on the wall.

3. Then, assemble the

L-mount bracket with screws (included in package).

4. After assembling the L-mount bracket, secure the lower part of L-mount bracket on the wall.

5. Pass the cables through the hole on the L-mount bracket and connect the cables to

corresponding connection ports.

6. Use the screws (included in package) to secure the cameras on the L-mount bracket.

1 2 3

4 5



Making a Video Call

A computer is required to use this device.

Step 1: Open your video collaboration application such as Zoom, Microsoft®Teams, Skype for

Business, Skype, Google Hangouts, Intel® Unite™, RingCentral, BlueJeans, V-Cube, LiveOn,

CyberLink U Meeting®, TrueConf, Adobe Connect, Cisco WebEx®, Fuze, GoToMeeting™, Microsoft®

Lync™, Vidyo, vMix, WebRTC, Wirecast, XSplit.

Step 2: Set the VC520 Pro as your primary camera device in your application (Please consult your

application setup guide for details).

Step 3: Ready to make a video call.

[Note] VC520 Pro is a plug-n-play conference camera. The system requires no special drivers. For

advanced setting and firmware update, please download AVer PTZApp.

Setup the Camera through the Web Browser

VC520 Pro has an Ethernet port for IP streaming and allows administrators to remotely control and set

up the camera via an internet access. Moreover, VC520 Pro also supports RTSP and RTMP functions.

For further details, please refer to user’s manual or contact our technical support.

1. Make sure the VC520 Pro has an internet access connection.

2. Open the browser and enter the IP address of the camera.

[Note] The browser supports:

Chrome: version 76.x or above Firefox: version 69 or above IE: Doesn’t support

The camera default IP address is 192.168.1.168. User can use “AVer IP Finder” app to find the

camera (Please refer to “Using AVer IP Finder to Find the Camera” section).

3. When login screen is shown, enter the password (default password is aver4321).

4. The web main screen is displayed.



Using AVer IP Finder to find the Camera

To find the IP address of your cameras, you can use the AVer IP Finder application. Follow the below

steps to find the IP address of camera.

Download the IP Finder from https://www.averusa.com/business/support/.

1. Run the IP Finder.

2. Click “Search”, and all available devices will be listed on the screen.

3. Select a camera from the list. The corresponding fields of IP address will display.

4. To change the IP address of camera, select “DHCP” or “Static IP”.

The DHCP should get the IP address from local dynamic IP sever. The static IP, user can enter the

specific IP address. Click “Apply” to apply the setting to the camera. The login password is

required (default password is aver4321; same as web access password).

5. Click “Search” button to re-scan the camera.

6. Double-click on the IP address of camera from the list can connect to camera through the browser.

[Note] If IP Finder cannot find the camera, please check following:

Please make sure the Ethernet connection of camera is well connected.

The camera and PC (IP Finder) are in the same LAN segment.



Install AVer PTZApp

In AVer PTZApp, user can configure the parameters of the camera.

Please go to http://www.aver.com/download-center to download the AVer PTZApp. After downloading,

double-click on the file and follow the on-screen instructions to complete the installation.

Use AVer PTZApp

1. After installing the AVer PTZApp, double-click on the

AVer PTZApp icon to run the application.

2. During your video call, you can use the AVer

PTZApp to pan, tilt and zoom the camera in/out and

enable/disable the backlight feature, set up camera

Home or Sleep mode preset points. For more

details, please refer to the user manual.

3. Tracking mode: It is a SmartFrame function which

can auto detect faces of people to find the best view

for all meeting participants. Users can change

SmartFrame function status in AVer PTZApp. In

AVer PTZApp, select “Settings” > “Tracking mode”

> “Auto frame/Manual frame/off”.

Also, pressing on the remote for 1 second

can switch the SmartFrame function between auto

and manual; a message (as figure shown) will

display on the screen to indicate in auto or manual

status.

[Note] While in conferencing meeting, participants

must face the camera for face detection

(SmartFrame).

4. Flip: If the camera is installed in the upside down

position, please enable the "Flip" function in the

AVer PTZApp, and the screen will display normally.



5. Hotkey Control: Enable hotkey control to use keyboard control camera’s movement and

backlight. The default is off.



A hotkey tip will display when mouse is moved to

the PTZ control button in PTZ mode.

If the hotkey function is enabled after installing the

PTZApp, PTZApp auto launch next time the PC

reboots. Therefore, the customer can use all the

hotkey commands when PTZApp is auto running in

system tray.

6. Speakerphone: setup speakerphone function

parameters.

- Nosie suppression: Reduce ambient noise.

- Automatically gain control: Enable/disable the

auto gain control.

- Echo cancellation: Enable/disable echo

situation.

- Keyboard noise suppression: Enable/disable

keyboard noise reduction.

- Phone in jack

Phone in: When the mobile phone is

connecting to Phone in port, please select

“Phone in” option.



3.5 mm microphone only: The speakerphone will transfer the soundthat it receives

from the external microphone (connected on phone in port) to far site.

3.5 mm microphone mix in: The speakerphone will transfer the sound that it receives

from the external microphone (connected on phone in port) and speakerphone to far site.

- Expansion mic mute

All: To mute all connected speakerphones.

Individual: To individually mute a speakerphone and not the extended speakerphones.



Contact Information

AVer Information Inc.

668 Mission Ct.

Fremont, CA 94539

www.averusa.com

Toll-free: 1(877)528-7824

Local: 1(408)263-3828

support.usa@aver.com

Federal Communication Commission Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference

when the equipment is operate din a commercial environment. This equipment generates, uses, and can radiate

radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:

This is a class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

CAUTION

- Risk of explosion if battery is replaced by an incorrect type.

- Dispose of used batteries in a safe and proper manner.

Andere Handbücher für VC520 Pro

Inhaltsverzeichnis

Andere AVer IP-Kamera Handbücher

AVer

AVer VC520 Bedienungsanleitung

AVer

AVer VB342 Pro Bedienungsanleitung

AVer

AVer IP Camera Bedienungsanleitung

AVer

AVer VB342+ Bedienungsanleitung

AVer

AVer ED5000 Bedienungsanleitung

AVer

AVer CC30 Bedienungsanleitung

AVer

AVer VC520 Pro Bedienungsanleitung

AVer

AVer FV2028-T Bedienungsanleitung

AVer

AVer FB1026 Bedienungsanleitung

AVer

AVer CC30 Bedienungsanleitung

AVer

AVer PTC115 Bedienungsanleitung

AVer

AVer SF2121-BHR-30 Bedienungsanleitung

AVer

AVer CAM540 Bedienungsanleitung

AVer

AVer CAM520 Pro Bedienungsanleitung

AVer

AVer CAM520 Pro Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

AVer

AVer COM520PRA Bedienungsanleitung

AVer

AVer VB342+ Bedienungsanleitung

AVer

AVer DL10 Bedienungsanleitung

AVer

AVer VB342+ Bedienungsanleitung

AVer

AVer SF2012H series Gebrauchsanweisung

AVer

AVer CAM570 Bedienungsanleitung

AVer

AVer 61U3600000AC Bedienungsanleitung

AVer

AVer VB350 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung

Digitus

Digitus DN-16085-1 Bedienungsanleitung