Avocent DSR 1021 Bedienungsanleitung

The Power of Being There®

Quick Installation Guide

DSR®Switch

DSR 1021/1022 Switches

The following instructions will help you

install and use your DSR switch.

Should you require further assistance, please

contact Avocent Technical Support.

To Contact Avocent Technical Support: Visit www.avocent.com 590-428-501B

To connect a DSR switch

Connecting power to the DSR switch

Turn off all servers that will be part of your

DSR switching system. Locate the power

cord that came with the DSR switch. Plug

one end into the power socket on the rear

of the DSR switch. Plug the other end into

an appropriate AC wall outlet.

Connecting the local port

Plug your VGA monitor, PS/2 keyboard and

mouse cables into the appropriately labeled

DSR ports.

Connecting a DSRIQ module to the

DSR switch

Choose an available port on the rear of your

DSR switch. Plug one end of a CAT 5 cable

(4-pair, up to 50 meters) into a numbered port

and plug the other end into the RJ-45 connector

of a DSRIQ module.

Connecting a server to the

DSRIQ module

Plug the DSRIQ module into the

appropriate ports on the back of a

server. Repeat this procedure for all

servers that are to be connected to the

DSR switch.

Connecting network and

remote users

Plug a CAT 5 cable from your Ethernet

network into the LAN connector on the back

of your DSR switch. Network users will

access the DSR switch through this port.

NOTE: The network setting can be

conﬁgured via the local port using the

OSCAR®graphical user interface.

(Continued on reverse side)

Ethernet

Telephone

Network

Modem

Local

Connection

Server

PM IPDU

Server

RJ-45

Adaptor

The Power of Being There®

Quick Installation Guide

DSR®Switch

DSR 1021/1022 Switches

The following instructions will help you

install and use your DSR switch.

Should you require further assistance, please

contact Avocent Technical Support.

To Contact Avocent Technical Support: Visit www.avocent.com 590-428-501B

To connect a DSR switch

(continued from reverse side)

Connecting an external modem

(optional)

The DSR switch may also be accessed

using an ITU V.92, V.90 or V.34-compatible

modem. Plug one end of a 9-pin serial

cable into the MODEM connector on the

back of your DSR switch. Plug the other

end into the appropriate port on the back of

the modem.

NOTE: Using a modem connection instead

of a LAN connection will limit the

performance capability of your DSR switch.

Connecting the PM IPDU to the

DSR switch (optional)

Plug one end of the RJ-45 cable supplied

with the PM Intelligent Power Distribution Unit

(IPDU) into the SPC connector on the DSR

switch. Using the supplied RJ-45 adaptor,

plug the other end of the cable into the PM

IPDU. Plug the power cords from the target

devices into the PM IPDU. Plug the PM IPDU

into an appropriate AC wall outlet.

Turning on targets and the switch

Turn on each target device and then turn on

the DSR switch.

For additional information

For further instructions on DSR switch

connection, software setup and security

conﬁguration, please refer to the installer/user

Ethernet

Telephone

Network

Modem

Local

Connection

Server

PM IPDU

Server

RJ-45

Adaptor

guide included with the switch.

Visit www.avocent.com for the latest

DSR software and ﬁrmware updates.

Andere Handbücher für DSR 1021

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Avocent Schalten Handbücher

Avocent

Avocent AMX5000 Bedienungsanleitung

Avocent

Avocent ESP-4 MI Montage- und Wartungsanleitung

Avocent

Avocent 1000 Series Bedienungsanleitung

Avocent

Avocent AMX Switch Series Montage- und Wartungsanleitung

Avocent

Avocent DSR Series DSR1020 Bedienungsanleitung

Avocent

Avocent AMX5000 Bedienungsanleitung

Avocent

Avocent AutoView 2000 Montage- und Wartungsanleitung

Avocent

Avocent DSR Series DSR2161 Bedienungsanleitung

Avocent

Avocent ESP Multi-Interface Serial Hub SuperSerial Bedienungsanleitung

Avocent

Avocent SwitchView Bedienungsanleitung

Avocent

Avocent SwitchView SC540 Bedienungsanleitung

Avocent

Avocent DSR Series DSR2035 Bedienungsanleitung

Avocent

Avocent AutoView Wireless Montage- und Wartungsanleitung

Avocent

Avocent PS/2 KVM Bedienungsanleitung

Avocent

Avocent AutoView 3100 Montage- und Wartungsanleitung

Avocent

Avocent AutoView 416 Montage- und Wartungsanleitung

Avocent

Avocent SWITCHVIEW OSD - Bedienungsanleitung

Avocent

Avocent ESP Serial Hub Montage- und Wartungsanleitung

Avocent

Avocent DSR Series DSR1010 Handbuch

Avocent

Avocent SwitchView SwitchView IC Bedienungsanleitung

Avocent

Avocent MPU1016-001 Montage- und Wartungsanleitung

Avocent

Avocent SwitchView DVI DH Series Bedienungsanleitung

Avocent

Avocent AutoView 1415 Bedienungsanleitung

Avocent

Avocent SwitchView Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung