AWS CH-501 Bedienungsanleitung
American Weigh Scales, Inc.
CH-501
CH-2000 User Manual
CH-Series
Digital Pocket Scale
CH-Series
MODE TARE ON/OFF
American Weigh CH-Series
Thank you for purchasing the American Weigh
CH-Series digital scale. Please read all operating
instructions carefully before use. This electronic scale
is a precision instrument. With normal care and proper
treatment, it will provide years of reliable service.
Never load the scale with more than the maximum
capacity. Overloading will permanently damage it!
Avoid any exposure to extreme heat or cold. Your
scale works better when operated at normal room
temperature. Always allow the scale to acclimatize to
normal room temperature for at least one hour before
use.
Give your scale sufcient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto tray top. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
I. OPERATION
Place Scale on a horizontal at surface.
1. Press [ON/OFF] key.
2. Wait until "0.0” is displayed.
3. Put the object(s) on the weighing platform.
4. Using the [MODE] key, you can switch between the
weighing units.
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place the "tare item" on the platform.
3. Press [TARE] and wait until "0.0" is displayed.
4. Add the "net-weight-item".
III. CALIBRATION
Calibration is NOT required before rst use. Only
calibrate if scale is not weighing properly.
**Make sure you use the correct calibration weight for
your scale or the calibration will not be accurate**
CH-501: 500g calibration weight
CH-2000: 2000g calibration weight
1. Turn OFF the scale.
2. Press and hold the [MODE] key, then tap the
[ON/OFF]. Now release both keys.
3. The display will show "000000" followed by "E-#",
where # is the required calibration weight (in grams).
4. Place the required standard calibration weight (not
included) onto the platform.
5. The display will show "Good" then shut down.
Calibration is complete!
IV. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display] Elimination of errors
[OUE2] Recalibrate the scale as shown above.
[H] You are overloading the scale. Remove the
excessive load immediately!
[-E] Readjust or replace batteries.
[888888] Use the scale in a more stable position
Model CH-501 CH-2000
Capacity 500g / 250ct / 321.51dwt /
17.64oz / 16.08ozt / 7716gn 2000g / 1286dwt / 70.56oz / ozt
Resolution 0.01g / 0.05ct / 0.01dwt/
0.001oz / 0.001ozt / 0.1gn 0.1g / 0.1dwt / 0.01oz / 0.01ozt
Display 6 - Digit Backlit LCD
Calibration Weight
(not Included) 500g 2000g
Platform Dimensions
(inches) 3.75 x 2.75
Scale Dimensions
(inches) 3.5 x 4.5 x 0.75
Power 4 x AAA Batteries (included)
Gross Weight 0.60 lb
Specications
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere AWS Skala Handbücher
AWS
AWS CM-500 Bedienungsanleitung
AWS
AWS 2K-BOWL Bedienungsanleitung
AWS
AWS CP-300 Bedienungsanleitung
AWS
AWS EDGE Bedienungsanleitung
AWS
AWS ME-5KG Bedienungsanleitung
AWS
AWS 330ECO Bedienungsanleitung
AWS
AWS SR-1 Bedienungsanleitung
AWS
AWS ScaleMate SM-200 Bedienungsanleitung
AWS
AWS QS-500 Bedienungsanleitung
AWS
AWS AT-500 Bedienungsanleitung
AWS
AWS KG-Series Bedienungsanleitung
AWS
AWS MDI-20 Bedienungsanleitung
AWS
AWS MC series Bedienungsanleitung
AWS
AWS CP3-100 Bedienungsanleitung
AWS
AWS MiniCD MCD-100 Bedienungsanleitung
AWS
AWS DigiPEN-500 Bedienungsanleitung
AWS
AWS 330LPW Montageanleitung
AWS
AWS AMW-505 Bedienungsanleitung
AWS
AWS Gemini-20 Bedienungsanleitung
AWS
AWS MERCURY MRC-200 Bedienungsanleitung
