AWS EDGE-5K Bedienungsanleitung

EDGE-5K (5000g x 1g)

User Manual

EDGE

EDGE-5K

Thank you for purchasing the American Weigh EDGE-

5K digital kitchen scale. Please read all operating instructions

carefully before use. Scales are precision measuring devices

and should always be handled with proper care. To ensure

years of reliable service, keep these simple tips in mind:

• Do not exceed the scale’s maximum capacity. This scale

has integrated overload protection, but any overload

protection has its limits.

• Avoid weighing in extreme heat or cold. Scales perform

best at normal room temperature.

• This scale has been calibrated at the factory. Only

advanced users should attempt recalibration using the

speciedcalibrationmasses.

• Store your scale in a clean, dry location. Dust, dirt, and

moisture can accumulate on the weighing sensors and

electronics causing inaccuracy or malfunction.

• Keep the area around and under the scale clean. Loose

debris under the scale can push against the base causing

inaccuracy.

• Avoid using your scale in close proximity to strong radio

wave emitting devices such as cordless phones.

• Alwaysweighonaatandlevelsurface,freefrom

vibrations and drafts. The corner of a room is usually the

most stable.

• Gently apply all items to be weighed. Do not drop items

onto the weighing platform. Overload protection does not

protect the sensor from shock loading.

• Avoid dropping your scale. The warranty does not cover

damage due to rough treatment or overload.

• Checkthebatteriesrstifyouarehavinganytroublewith

your scale. This simple step can remedy most scale issues.

I. Part List

1. Scale

2. CR2032 Battery

II. Display Overview

III. Key Description

1. Unit Key - Changes the displayed unit of measure

2. ON/OFF/Tare Key - Tap to turn on or re-zero the scale (if

already on). Hold to turn the scale off.

IV. Battery Installation

1. Beforeusingthescaleforthersttime,checkthebattery

compartment and remove any plastic insulation strips or

packaging that may be in place to prevent battery drainage

during shipping/storage.

2. If you are replacing the batteries, make sure the positive

side faces out:

1. 2.

Max 5kg x 1g Max 11lb x 0.1oz

UNIT

Low Battery

Indicator Weighing Unit

Weight Value

Negative Weight

Indicator

Tare Indicator

EDGE-5K

V. Scale Operation

1. Placethescaleonaat,levelsurface.

2. Tap the key to turn the scale on.

3. Once the scale displays zero, you are ready to weigh.

4. Place items to be weighed on the center of the scale

platform.

5. Whenyouarenishedweighing,youcanturnthescaleoff

by holding the key for 2 seconds.

VI. Using the Tare Feature

You can use this scale’s tare feature to subtract the weight of an

empty container or vessel to weigh only the contents. NOTE: The

weight of the container will subtract from the available capacity.

1. Place the empty container or vessel on the weighing

platform.

2. Press the key once. The display will then reset

to zero. If the container is removed, its weight will be

displayed as a negative number.

3. Youmaynowllthecontainerwiththequantitytobe

weighed. The display will show just the weight of the

contents.

4. To return to normal weight display (gross weight), remove

any items from the weighing platform and press the

key again to re-zero the scale.

VII. Changing the Unit of Measure

1. Press the UNIT key to change the scale’s displayed unit of

measure.

2. If the scale is turned off then back on, it will default to the

last unit used.

• EDGE-5K Units: g (gram) lb:oz (pound:ounce) ml

(milliliter) .oz.(uidounce-US)

VIII. Calibration Adjustment (Advanced Users Only)

Calibration is performed at the factory. Only advanced users

should attempt calibration if the scale is not weighing properly.

1. Turn the scale on and wait for zero to be displayed.

2. Tap the key four times, holding the key on the last

tap. A random number will be displayed.

3. With no weight on the scale, tap the key again to set

the zero point. After a couple of seconds the display will

show “ZERO” followed by “0000” (±2).

4. Place a 2000g calibration weight on the center of the

platform. After a couple of seconds the display will show

“CAL1” followed by another random number (ISN).

5. Now place a total of 5000g on the center of the scale

platform. The display will show “CAL2” then “5000g”.

Calibration is complete!

EDGE-5K

IX. Error Codes

1. Symbol - Batteries are low. Replace the batteries.

2. EEEE- Maximum capacity exceeded. This scale cannot be

used to give measurements over 11lbs (5kg).

X. Specications

EDGE-5K

Max. Capacity 5000g/5000ml/169.oz/11lb

Readability 1g/1ml/0.1.oz/0.1oz

Calibration Weights 2000g, 5000g (not included)

Power 1 x CR2032 Lithium Battery (included)

Auto-Off Time 180SecondsofNon-Use

Dimensions 9.2 x 5.4 x 0.5”

Display Size 1.0 x 2.3”

Warranty 10 Year Limited Warranty

American Weigh Scales, Inc.

Norcross,GA30092,U.S.A

MadeinChinatoourexactspecicationsandqualitycontrol.

Inhaltsverzeichnis

Andere AWS Skala Handbücher

Beliebte Skala Handbücher anderer Marken

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung

Fidelity Electronics

Fidelity Electronics G2e Bedienungsanleitung