AWS SR-1KG Bedienungsanleitung

American Weigh Scales

SR-1KG (1kg x 0.001g)

SR-5 (5kg x 0.005g)

SR-20 (20kg x 0.01kg)

User Manual

SR-Series

SR-Series Manual

Thank you for purchasing the American Weigh

SR-Series digital hanging scale. Please read all operating

instructions carefully before use. Scales are precision

measuring devices and should always be handled with

proper care. To ensure years of reliable service, keep these

simple tips in mind:

• Do not exceed the scale’s maximum capacity.

Overloading your scale can permanently damage it!

• Avoid exposure to extreme heat or cold. Scales

perform best at normal room temperature. If

temperatures have changed dramatically, calibration

and adjustment may be necessary.

• Allow your scale to warm up for 30-60 seconds before

performing calibration and adjustment (if available).

• Store your scale in a clean, dry location. Dust, dirt,

and moisture can accumulate on the weighing

sensors and electronics causing inaccuracy or

malfunction.

• Avoid using your scale in close proximity to strong

radio wave emitting devices such as computers, cash

registers, and cordless phones.

• Gently apply all items to be weighed. Do not shock

load items onto the weighing hook.

• Avoid dropping your scale. The warranty does not

cover damage due to rough treatment or overload.

• Checkthebatteriesrstifyouarehavinganytrouble

with your scale. This simple step can remedy most

scale issues.

• Do not disassemble your scale. This product contains

no user serviceable parts.

I. Part List

1. Scale

2. AAA Batteries (x2)

II. Key Description

III. Basic & Advanced Mode

This scale features two operating modes: Basic and

Advanced.Tochangetheoperatingmode,ipthetoggle

switch inside the battery compartment up or down:

1. Basic Mode - Weight locks on the display when

stable (except SR-1KG). Scale turns off after 60

seconds of inactivity.

2. Advanced Mode - Weight does not lock when stable.

Scale will remain on until powered off manually.

IV. Battery Installation

1. Beforeusingthescaleforthersttime,check

the battery compartment and remove any plastic

ON/OFF

TARE Key

Basic /

Advanced

Mode

Switch

Down

Inside Battery

Compartment

HOLD

SR-Series Manual

insulation strips or packaging that may be in place to

prevent battery drainage during shipping/storage.

2. If you are replacing the batteries, make sure the

positive and negative contacts are properly aligned.

V. Operation

1. Press the key.

2. Wait for the scale to stabilize ( will be displayed in

the bottom left corner of the LCD). Place the item to

be weighed on the weighing hook.

3. When the weight is stable, the red light will turn on,

and HOLD will be displayed below the weight. (SR-5

and SR-20 only)

4. Remove the object(s) from the hook and tap the

key to re-zero the scale.

5. To turn the scale off, press and hold the key.

VI. Changing the Unit of Measure

This scale can read in KG or LB (G/OZ for SR-1). To change

the weighing mode, follow these instructions:

1. Press the key to turn the scale on then release.

While the scale shows 8888 press and hold the

key until the current weighing unit is displayed.

2. Now tap the key to toggle between the available

weighing units.

3. After a couple of seconds of no activity the scale will

enter normal weighing mode with the selected unit.

• SR-1KG Units: g (gram) oz (ounce)

• SR-5, SR-20 Units: lb (pound) kg (kilogram)

VII. Using the Tare Feature

You can use this scale’s tare feature to subtract the weight

of an empty container or vessel for net weight determination.

NOTE: The weight of the container will subtract from the

available capacity.

1. Turn on the scale as described in Section IV.

2. Attach your tare item / empty container using the

hook and wait for it to stabilize.

3. Tap the button. “0.0” will be displayed.

4. You can now add items to the container to obtain

just the weight of the contents.

5. When the container is removed the weight will be

held on the display. Press again to zero the scale.

VIII. Adjustment (Calibration)

Adjustment is performed professionally at the factory.

Only advanced users should perform calibration using the

required weight if the scale is not weighing properly:

Model Acceptable

Tolerance (±)

Calibration

Weight

Recommended

Accuracy Class

SR-1KG 2g 1kg OIML M1

SR-5 0.015kg 5kg OIML M1

SR-20 0.03kg 10kg OIML M1

SR-Series Manual

2. Press the key to turn the scale on.

3. Once the LCD shows “8888” tap the keyve

times until a random code displays.

4. Press again.Thedisplaywillash“CAL”followed

by the required calibration weight (see chart).

5. Add the required weight to the hook. The display will

show pass and return to normal weighing mode.

6. Remove the weight and press and hold the key to

turn the scale off. Calibration is complete!

IX. Troubleshooting

• Problem: Scale will not turn on

• Solution: Check the batteries

• Problem: Display will not stabilize

• Solution: Make sure the weight is stable on the

hook and not shaking or swinging

• Problem: Displayed weight is inaccurate

• Solution: Perform a calibration adjustment

X. Error Codes

1. OUTZ - Zero setting has shifted. Perform calibration

adjustment. If the problem persists, the load cell may

be permanently damaged due to overloading.

2. EEEEE - Maximum capacity exceeded. Remove the

extra weight to avoid damaging the load cell.

3. LLLLL - Load cell has been overloaded.

4. UNST - The scale is unstable. Use the scale in a

more stable position

XI. Specications

SR-1KG

Max. Capacity 1000g / 35.30oz

Readability 1g / 0.05oz

Min. Capacity 3g / 0.10oz

Power 2 x AAA Alkaline Batteries

Dimensions 4.0 x 2.3 x 0.7

Hook Dimensions Gap: 0.5in / Throat: 0.5in

Warranty 10 Year Limited Warranty

SR-5 SR-20

Max. Capacity 5kg / 11lb 20kg / 44lb

Readability 0.005kg / 0.01lb 0.01kg / 0.02lb

Min. Capacity 0.015kg / 0.03lb 0.03kg / 0.06lb

Power 2 x AAA Alkaline Batteries

Dimensions 4.0 x 2.3 x 0.7

Hook Dimensions Gap: 0.5in / Throat: 0.5in

Warranty 10 Year Limited Warranty

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AWS Skala Handbücher

AWS

AWS PNX-203 Bedienungsanleitung

AWS

AWS 330SW Bedienungsanleitung

AWS

AWS TL-330 (330lb x 0.2lb) Bedienungsanleitung

AWS

AWS MB-100 Bedienungsanleitung

AWS

AWS AMW-505 Bedienungsanleitung

AWS

AWS AMW-DISC-55 Bedienungsanleitung

AWS

AWS KG-Series Bedienungsanleitung

AWS

AWS PV-650 Bedienungsanleitung

AWS

AWS PP-50 Bedienungsanleitung

AWS

AWS VANILLA-5K Bedienungsanleitung

AWS

AWS HB-6 Bedienungsanleitung

AWS

AWS AMW-Card120 Bedienungsanleitung

AWS

AWS VP-100 Bedienungsanleitung

AWS

AWS BLADE V2 BL2-50 Bedienungsanleitung

AWS

AWS AMW-13 Bedienungsanleitung

AWS

AWS HX-502 Bedienungsanleitung

AWS

AWS AMW-50 Bedienungsanleitung

AWS

AWS Gemini-20 Bedienungsanleitung

AWS

AWS CH-501 Bedienungsanleitung

AWS

AWS MDI-20 Bedienungsanleitung

AWS

AWS AMW-TC200 Bedienungsanleitung

AWS

AWS PC Series Bedienungsanleitung

AWS

AWS KG-10 Bedienungsanleitung

AWS

AWS CM-500 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung

Fidelity Electronics

Fidelity Electronics G2e Bedienungsanleitung