AWS xp150 Bedienungsanleitung
American Weigh Scales, Inc.
User Manual
xp
150
Digital Pocket Scale
xp
150
xp150 Manual
Thank you for purchasing the American Weigh
xp
150
digital scale. Please read all operating instructions
carefully before use. This electronic scale is a
precision instrument. With normal care and proper
treatment, it will provide years of reliable service.
Never load the scale with more than the maximum
capacity. Overloading will permanently damage it!
Avoid any exposure to extreme heat or cold. Your
scale works better when operated at normal room
temperature. Always allow the scale to acclimate to
normal room temperature for at least one hour before
use.
Give your scale suf cient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto tray top. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
This scale has been calibrated before shipment, how-
ever accuracy may be affected by variations of gravity,
shipment, handling, and changes in temperature.
OPERATION
1. Place the scale on a at surface and press the
ON/OFF key ( )
2. Wait until the scale displays “0.0”.
3. Place the item(s) to be weighed on the platform
4. Press the Unit Selection Key ( ) to switch
between weighing units.
TARE WEIGHING
1. Turn the scale on as described above.
2. Place the “tare item” onto the platform.
3. Press the TARE key ( ) and the scale display
will reset to zero.
4. Add the “net-weight-item”.
CALIBRATION
1. With the scale ON, press and hold the Calibration
Key ( ) until the display shows “CAL”.
2. The display will ash “0.0”. Press the Calibration
Key again.
3. The display will now ash “100.0”. Place a 100g
calibration weight onto the platform and press the
Calibration Key one last time.
4. The scale will display “PASS” then return to normal
weighing. Calibration is complete. You may remove
the weight and turn off the scale
1. With the scale ON, press and hold the Calibration
Key ( ) until the display shows “CAL”.
1. With the scale ON, press and hold the Calibration
Key ( ) until the display shows “CAL”.
Key ( ) until the display shows “CAL”.
Key ( ) until the display shows “CAL”.
Key ( ) until the display shows “CAL”.
1. Place the scale on a at surface and press the
ON/OFF key ( )
1. Place the scale on a at surface and press the
ON/OFF key ( )
ON/OFF key ( )
4. Press the Unit Selection Key ( ) to switch
4. Press the Unit Selection Key ( ) to switch
4. Press the Unit Selection Key ( ) to switch
3. Press the TARE key ( ) and the scale display
3. Press the TARE key ( ) and the scale display
3. Press the TARE key ( ) and the scale display
IV. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display]
Elimination of errors
Nothing, Battery-Symbol, [lo] or [88888]
Change the batteries.
[OUE2]
Recalibrate the scale as shown above.
[EEEEE]
You are overloading the scale. Remove the
excessive load immediately!
[LLLLL]
The delicate weighing load cells have
been damaged by misusing the scale
(i.e. it was shocked, dropped or
overloaded). You can try recalibrating the
scale. If the load cell has not been
damaged too much it will work
again after recalibration.
[UNST]
Use the scale in a more stable position
Speci cations
Model
xp150
Capacity
150g / 5.3oz
Resolution
0.1g / 0.01oz
Weighing Units
grams (g), ounces (oz)
Display
4 - Digit Backlit LCD
Calibration Weight
(not Included)
100g
Platform Dimensions
(inches)
2.4 x 3
Scale Dimensions
(inches)
4.75 x 3.25 x 0.9
Power
2 x AAA (included)
Weight
0.26 lb
Inhaltsverzeichnis
Andere AWS Skala Handbücher
AWS
AWS 330LPW Bedienungsanleitung
AWS
AWS VANILLA-5K Bedienungsanleitung
AWS
AWS MSC-200 Bedienungsanleitung
AWS
AWS ECOWEIGH Series Bedienungsanleitung
AWS
AWS SC-501 Bedienungsanleitung
AWS
AWS Gemini-20 Bedienungsanleitung
AWS
AWS CP3-100 Bedienungsanleitung
AWS
AWS AMW-500i Bedienungsanleitung
AWS
AWS JB-500 Bedienungsanleitung
AWS
AWS BT2-201 Bedienungsanleitung
AWS
AWS Digital Kitchen Scale Bedienungsanleitung
AWS
AWS MSC-100 Bedienungsanleitung
AWS
AWS LS-110 Bedienungsanleitung
AWS
AWS 330ECO Bedienungsanleitung
AWS
AWS CG-Series Bedienungsanleitung
AWS
AWS LB-1000 Bedienungsanleitung
AWS
AWS AMW-150M Bedienungsanleitung
AWS
AWS CARD-V2 Bedienungsanleitung
AWS
AWS HX-502 Bedienungsanleitung
AWS
AWS HB-6 Bedienungsanleitung
