AXIOMTEK PANEL5150-675 Bedienungsanleitung

PANEL5150-675

All-in-One

15.0” Super Slim

PANEL PC

User’s Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be

accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any infringements of

patents or other rights of third parties, which may result from its use.

AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in

this document. AXIOMTEK makes no commitment to update or to keep current the

information contained in this manual.

AXIOMTEK reserves the right to make improvements to this document and/or

product at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of AXIOMTEK Co.,

Ltd.

April 2005, Version A2

Printed in Taiwan

iii

Safety Approvals

 CEMarking

 FCCClassA

FCC Compliance

This equipment has been tested and complies with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measurers:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply with

emission limits.ou

Safety Precautions

Before getting started, read the following important cautions.

1. The PANEL5150-675 does not come equipped with an

operating system. An operating system must be loaded

first before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any

static-shielded devices. Most electronic components are

sensitive to static electrical charge.

3. Disconnect the power cord from the PANEL5150-675

before making any installation. Be sure both the system

and the external devices are turned OFF. Sudden surge

of power could ruin sensitive components. Make sure the

PANEL5150-675 is properly grounded.

4. The brightness of the flat panel display decreases with

usage. However, hours of use vary depending on the

application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The PANEL5150-675 may come

with or w/o a touchscreen. Although the touchscreen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touchscreen, you

must follow the same procedure and not spray any

cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or

internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or

vibration. When assembling the PANEL5150-675, make

sure it is securely installed.

8. Do not open the system’s back cover. If opening the

cover for maintenance is a must, only a trained

technician is allowed to do so. Integrated circuits on

computer boards are sensitive to static electricity. To

avoid damaging chips from electrostatic discharge,

observe the following precautions:

 Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity on

your body.

 When handling boards and components, wear a

wrist-grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

MS-DOS, Microsoft C and QuickBASIC are trademarks of

Microsoft Corporation.

VIA is a trademark of VIA Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics

Corporation.

Other brand names and trademarks are the properties of

their respective owners.

Table of Contents

TUC h a p t e r 1 IntroductionUT ...............................................1

TU1.1UT TUGeneral DescriptionUT ..............................................1

TU1.2UT TUSpecificationsUT ........................................................2

TU1.2.1UT TUCore System for PANEL5150-675 SBC83675-based

systemUT ................................................................................2

TU1.2.2UT TUI/O SystemUT .............................................................2

TU1.2.3UT TUBuilt-in PeripheralsUT ................................................3

TU1.2.4UT TUSystem SpecificationUT ............................................4

TU1.3UT TUDimensionsUT ............................................................5

TU1.4UT TUI/O OutletsUT ..............................................................7

TU1.4UT TUI/O OutletsUT ..............................................................8

TU1.5UT TUUtilities SupportedUT ................................................9

TUC h a p t e r 2 System InstallationUT ................................10

TU2.1UT TUCPU, HDD, and DRAM InstallationUT ....................12

TU2.2 FDD InstallationUT ......................................................15

TU2.3UT TUCD-ROM InstallationUT ...........................................18

TU2.3.1UT TUPackageUT ..............................................................18

TU2.4UT TU3 x Serial PortsUT ....................................................22

TU2.5UT TUParallel PortUT .........................................................23

TU2.6UT TUVGAUT ......................................................................23

TU2.7UT TUEthernetUT ................................................................23

TU2.8UT TUDigital I/OsUT ...........................................................25

TU2.9UT TUKeyboardUT..............................................................25

TU2.10UT TURiser Card AssemblyUT..........................................26

TU2.11UT TUPS/2 MouseUT ..........................................................27

TUC h a p t e r 3 Driver InstallationUT..................................28

TU3.1UT TUSystemUT .................................................................28

TU3.2UT TUTouch ScreenUT ......................................................29

TU3.2.1UT TUSpecificationUT .......................................................29

TU3.2.2 UT TUDriver Installation- Windows

98/2000/XP/CE.NET/XP-EmbeddedUT .................................30

Table of Contents vii

TU3.2.3UT TUDriver Installation- DOSUT ......................................32

TU3.2.4UT TUDriver Installation- LinuxUT.....................................34

TUA p p e n d i x A SBC83675 BIOS SetupUT .....................37

TUA.1UT TUBIOS IntroductionUT ...............................................37

TUA.2UT TUBIOS SetupUT ..........................................................37

TUA.2.1UT TUStandard CMOS SetupUT .......................................39

TUA.2.2UT TUAdvanced BIOS FeaturesUT ..................................44

TUA.2.3UT TUAdvanced Chipset FeaturesUT .............................51

TUA.2.4UT TUIntegrated PeripheralsUT .......................................56

TUA.2.5UT TUPower Management SetupUT ...............................61

TUA.2.6UT TUPNP/PCI ConfigurationUT .......................................65

TUA.2.7UT TUPC Health StatusUT..................................................67

TUA.2.8UT TUFrequency/Voltage ControlUT ..............................68

TUA.2.9UT TULoad Fail-Safe DefaultsUT ......................................69

TUA.2.10UT TUSet Supervisor/User PasswordUT ...........................70

TUA.2.11UT TUSave & Exit SetupUT ................................................72

TUA.2.12UT TUExit Without SavingUT .............................................73

TUA p p e n d i x B Power Supply SpcificationsUT ............75

TUB.1UT TUAT 100W Power SupplyUT ......................................75

TUB.1.1UT TUOutput SpecificationsUT.........................................75

TUB.1.2UT TUInput SpecificationsUT ............................................75

TUB.1.3UT TUGeneral SpecificationsUT ......................................76

TUB.1.4UT TUEnvironmental SpecificationsUT ............................76

TUB.1.5UT TUInternational StandardsUT .....................................76

TUSafety StandardsUT ................................................................76

TUEMI StandardsUT .....................................................................76

TUEMS StandardsUT ....................................................................76

TUB.2UT TUOptional DC Power SuppliesUT .............................77

TUB.2.1UT TU+18~56V 100W DC Power SupplyUT ......................77

PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual

Introduction 1

C h a p t e r 1

Introduction

This chapter contains the general information and the detail

specifications of the PANEL5150-675. Chapter 1 includes the

following sections:



General Description

 System Specification



Dimensions



I/O Outlets

 Utilities Supported

1.1 General Description

The PANEL5150-675 super slim industrial PANEL PC is mainly

designed for industrial automation and some space-constricted

embedded applications. For some space-concerned industries, a

traditional PC with a separate main system, display monitor and

keyboard is too complex for system integration.

Ruggedly designed Industrial Panel PC, the PANEL5150-675, is an

all-in-one system which is 100% IBM PC/AT compatible. It includes

integrated 15.0” TFT LCD, touch screen, super I/Os, Ethernet, and

packs special industrial features like watchdog timer, CMOS double

backup. The industrial-graded PANEL5150-675 can be easily applied

to any embedded applications. It allows the system to continuously

operate in any hostile industrial environments where stability and

reliability is a must. Common applications of the PANEL5150-675

include tooling machine, POI terminal, stand-alone KIOSK, medical

instrument, mobile communication device and banking system - to

name just a few.

the ultimate one-step solution for your space-limited applications.

PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual

Introduction

1.2 Specifications

1.2.1 Core System for PANEL5150-675

SBC83675-based system

 CPU: Intel Celeron 533MHz ~ 1.3G MHz;

Intel Pentium III 550 ~ 1.4G MHz

VIA Cyrix-III/C3 Family at 100/133MHz FSB

 System Chipset: VIA VT8606(Twist-T) + VT82C686B

 BIOS: Phoenix-Award BIOS, 4Mbit with RPL/PXE LAN boot

ROM, SmartView and customer BIOS backup.

 System Memory: One 168-pin DIMM Socket

Maximum of 512MB SDRAM

ECC/parity

 L2 Cache: Integrated in CPU

 Bus Clock: 66/100/133 MHz

 Watchdog Timer: Generates a system reset or NMI by

jumper selectable; software

programmable Time interval; 64 levels,

0.5~8 / 5~80 / 50~800 / 100~1600 seconds

1.2.2 I/O System

 Standard I/O:

 4 x serial ports with power;

3 x RS-232, 1 x

RS-232/422/485 jumper

selectable

 1 x parallel port,

SPP/EPP/ECP

 1 x Keyboard Interface

 1 x PS/2 Mouse Interface

 2 x USB Ports 1.1 compliant



Digital I/O: Input x 4, Output x 4

 Ethernet:

- Realtek RTL 8100C PCI Bus 10/100M Base-T

- Wake-On-LAN

- RJ-45 interface equipped

Inhaltsverzeichnis

Andere AXIOMTEK Touchscreen Handbücher

AXIOMTEK

AXIOMTEK GOT315WL-845-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT317-502-FR Bedienungsanleitung

AXIOMTEK

AXIOMTEK MPC170-831-DC Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT115-319 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT815W-511 Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883 Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT-3100T Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT-3156TL-830 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3217W-845-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3846T-832 Bedienungsanleitung

AXIOMTEK

AXIOMTEK IFO2175-850-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK MPC240 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3187WL-834 Bedienungsanleitung

AXIOMTEK

AXIOMTEK MPC153W-834 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-502-PCT/FR Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3217WL-845-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK MPC103-845 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT5840T-834 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321A-ELK-WCD Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT815-834 Bedienungsanleitung

AXIOMTEK

AXIOMTEK ITC150WM Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT-5571TL-621 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

AXIOMTEK

AXIOMTEK IFO2225-873 Series Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung