AXIOMTEK PANEL5155-807 Bedienungsanleitung

PANEL5155-807

Open Frame 15” TFT Touch

Panel Computer

User’s Manual

Disclaimers

The information in this manual has been carefully checked and is believed to

be accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any

infringements of patents or other rights of third parties, which may result from

its use.

AXIOMTEK assumes no responsibility for any inaccuracies that may be

contained in this document. AXIOMTEK makes no commitment to update or

to keep current the information contained in this manual.

AXIOMTEK reserves the right to make improvements to this document and/or

product at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written permission of

AXIOMTEK Co., Ltd.

March 2007, Version A4

Printed in Taiwan

iii

Safety Approvals

CE Marking

FCC Class A

FCC Compliance

This equipment has been tested and complies with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measurers:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables must be used in order to comply with

emission limits.ou

Safety Precautions

Before getting started, read the following important cautions.

1. The PANEL5155-807 does not come equipped with an

operating system. An operating system must be loaded first

before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist strap

and place all electronic components in any static-shielded

devices. Most electronic components are sensitive to static

electrical charge.

3. Disconnect the power cord from the PANEL5155-807 before

making any installation. Be sure both the system and the

external devices are turned OFF. Sudden surge of power

could ruin sensitive components. Make sure the

PANEL5155-807 is properly grounded.

4. The brightness of the flat panel display decreases with usage.

However, hours of use vary depending on the application

environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The PANEL5155-807 may come with

or w/o a touch screen. Although the touch screen is chemical

resistant, it is recommended that you spray the liquid cleaner

on a cloth first before wiping the screen. In case your system

comes without the touch screen, you must follow the same

procedure and not spray any cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touch screen.

Scratches on the touch screen may cause malfunction or

internal failure to the touch screen.

7. The flat panel display is not susceptible to shock or vibration.

When assembling the PANEL5155-807, make sure it is

securely installed.

5. Do not open the system’s back cover. If opening the cover for

maintenance is a must, only a trained technician is allowed to do

so. Integrated circuits on computer boards are sensitive to static

electricity. To avoid damaging chips from electrostatic discharge,

observe the following precautions:

9Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few seconds.

This will help to discharge any static electricity on your body.

9When handling boards and components, wear a

wrist-grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

MS-DOS, Microsoft C and Quick BASIC are trademarks of

Microsoft Corporation.

VIA is a trademark of VIA Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

Other brand names and trademarks are the properties of their

respective owners.

This page does not contain any information.

Table of Contents vii

Table of Contents

Disclaimers........................................................................ii

Safety Approvals................................................................iii

FCC Compliance ..............................................................iii

Safety Precautions .............................................................iv

C h a p t e r 1 .....................................................................1

Introduction..........................................................................1

1.1 General Description ............................................1

1.2 Specifications......................................................1

1.2.1 Main CPU board..................................................1

1.2.2 I/O System ...........................................................2

1.2.3 System Specification ..........................................3

1.3 Dimensions ..........................................................3

1.4 Rear View and I/O Outlets ..................................5

1.4.1 Rear View ............................................................5

1.4.2 I/O Outlet.............................................................6

1.5 Package list..........................................................7

C h a p t e r 2 .....................................................................8

Hardware Installation.........................................................8

2.1 CPU and DRAM Installation ...............................8

2.2 HDD Installation.................................................11

2.3 Serial Port Interface ..........................................12

2.4 VGA.....................................................................12

2.5 Ethernet..............................................................12

2.6 Mountings: VESA/ Wall/ Panel mount.............13

2.6.1 VESA ARM..........................................................13

2.6.2 Wall Mount.........................................................14

2.6.3 Panel-Mount Kit Assembly...............................15

C h a p t e r 3 ...................................................................16

Driver Installation.............................................................16

3.1 System................................................................16

Table of Contents

viii

3.2 P5155-807S Touch Screen ...............................17

3.2.1 Specification .....................................................17

3.2.2 Driver Installation- Windows2000/XP..............18

3.3 P5155-807R Touch Screen...............................21

3.3.1 Specification .....................................................21

3.3.2 Driver Installation- Windows2000/XP..............22

3.3.3 Driver Installation- DOS ....................................24

C h a p t e r 4 ...................................................................28

Embedded O.S. Installation.............................................28

4.1 Windows XP Embedded ...................................28

4.1.1 Calibration Touch Screen for P5155-807S......29

4.1.2 Calibration Touch Screen for P5155-807R......29

4.2 Windows CE.NET 5.0 ........................................30

4.2.1 Calibration Touch Screen for P5155-807S......30

4.2.2 Calibration Touch Screen for P5155-807R......30

A p p e n d i x A ..............................................................31

SBC86807 BIOS Setup.......................................................31

A.1 BIOS Introduction..................................................31

A.2 BIOS Setup.............................................................31

A.2.1 Standard CMOS Setup .....................................33

A.2.2 Advanced BIOS Features.................................36

A.2.3 Advanced Chipset Features ...........................40

A.2.4 Integrated Peripherals .....................................42

A.2.5 Power Management Setup..............................45

A.2.6 PNP/PCI Configuration.....................................48

A.2.7 PC Health Status................................................49

A.2.8 Frequency/Voltage Control............................50

A.2.9 Load Fail-Safe Defaults ....................................51

A.2.10 Load Optimized Defaults .................................52

A.2.11 Set Supervisor/User Password .........................53

A.2.12 Save & Exit Setup ..............................................54

A.2.13 Exit Without Saving ...........................................55

Appendix B.........................................................................56

Table of Contents ix

Power Supply Specification ............................................56

B.1 Power Supply: FSP180-50PLA1 (180W, AC

110~230V Input)...............................................................56

B.1.1 ELECTRICAL REQUIREMENTS ...................................56

B.1.2 EFFICIENCY..............................................................59

B.1.3 ENVIRONMENTAL REQUIREMENTS..........................59

B.1.4 MTBF .........................................................................59

B.1.5 SAFETY......................................................................59

B.2 Power Supply: FSP200-62DL (200W, DC 18~36V

Input)…………………………………………………………60

B.2.1 ELECTRICAL REQUIREMENTS ...................................60

B.2.2 EFFICIENCY..............................................................63

B.2.3 ENVIRONMENTAL REQUIREMENTS..........................63

B.2.4 MTBF .........................................................................63

B.2.5 SAFETY......................................................................63

PANEL5155-807 User’s Manual

Introduction 1

C h a p t e r 1

Introduction

This chapter contains the general information and the detail

specifications of the PANEL5155-807. Chapter 1 includes the

following sections:

General Description

System Specification

Dimensions

Back View & I/O Outlets

Package List

1.1 General Description

The PANEL5155-807 is an Open Frame TFT Touch Panel PC which

equipped with superior Pentium®M/Celeron®M processors and 15"

XGA LCD display. The paradigmatic industrial panel computer,

P5155-807, is a complete full-function and extreme cost-effective

industrial HMI controller.

This ideal industrial-grade panel computer PANEL5155-807 can be

applied to the several of industrial or commercial projects, such as

transportation, factory automation, HMI machine controller, Point Of

Sales, KIOSK and more. Moreover, PANEL5155-807 provides highly

reliable and highly flexible industrial-grade products in all-in-one

solutions.

1.2 Specifications

1.2.1 Main CPU board

CPU: Socket 479 for Intel®Pentium®M and Intel®Celeron®

M Processors.

System Chipset: Intel®852GM+ICH*4

BIOS: Phoenix-Award BIOS, Y2K compliant

4Mbit Flash, DMI, Plug and Play

SmartView for multiple LCD type selection, display

mode option and application extension features

Inhaltsverzeichnis

Andere AXIOMTEK Touchscreen Handbücher

AXIOMTEK

AXIOMTEK GOT-3156TL-830 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P1177E-500 Bedienungsanleitung

AXIOMTEK

AXIOMTEK PANEL1127-671 Bedienungsanleitung

AXIOMTEK

AXIOMTEK PANEL5150-675 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT-3106TL-830 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT5840T-834 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT315WL-845-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK P1177S-871 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT315W-521-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT812W-511 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT815-834 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT5152T-832 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT315A-ELK-WCD Bedienungsanleitung

AXIOMTEK

AXIOMTEK P1127E-500 Bedienungsanleitung

AXIOMTEK

AXIOMTEK MPC225-873 Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT715S-RA-M Bedienungsanleitung

AXIOMTEK

AXIOMTEK ITC150WM Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3187W-834-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT-812 Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK PANEL1173-841 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3217W-845-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT-3150T Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT115-319 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT-3126TL-830 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung