AXIOMTEK GOT-812 Series Bedienungsanleitung

GOT-812 Series

12.1" XGA/SVGA TFT IP66-rating Touch

Panel Computer

User’s Manual

Disclaimers

This manual has been carefully checked and believed to contain

accurate information. AXIOMTEK Co., Ltd. assumes no responsibility

for any infringements of patents or any third party’s rights, and any

liability arising from such use.

AXIOMTEK does not warrant or assume any legal liability or

responsibility for the accuracy, completeness or usefulness of any

information in this document. AXIOMTEK does not make any

commitment to update the information in this manual.

AXIOMTEK reserves the right to change or revise this document

and/or product at any time without notice.

No part of this document may be reproduced, stored in a retrieval

system, or transmitted, in any form or by any means, electronic,

mechanical, photocopying, recording, or otherwise, without the prior

written permission of AXIOMTEK Co., Ltd.

May 2011, Version A4

Printed in Taiwan

iii

Safety Approvals

CE Marking

IEC60945

FCC Class A

FCC Compliance

This equipment has been tested in compliance with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are meant to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following methods:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment to another outlet of a circuit that

doesn’t connect with the receiver.

4. Consult the dealer or an experienced radio/TV technician for

help.

Shielded interface cables must be used in order to comply with the

emission limits.

NOTE The GOT-812 series is compliant by IEC60945, it

configures with GOT-812, +12VDC power adapter, COM

and USB by Keyboad and Mouse.

Safety Precautions

Before getting started, please read the following important safety

precautions.

1. The GOT-812 Series does not come equipped with an

operating system. An operating system must be loaded first

before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any static-

shielded devices. Most electronic components are sensitive

to static electrical charge.

3. Disconnect the power cord from the GOT-812 Series before

any installation. Be sure both the system and external

devices are turned OFF. A sudden surge of power could ruin

sensitive components that the GOT-812 Series must be

properly grounded.

4. The brightness of the flat panel display will be getting weaker

as a result of frequent usage. However, the operating period

varies depending on the application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The GOT-812 Series may come

with or w/o a touchscreen. Although the touchscreen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touchscreen, you must

follow the same procedure and not spray any cleaner on the

flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or

internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or vibration.

When assembling the GOT-812 Series, make sure it is

securely installed.

8. Do not open the system’s back cover. If opening the cover

for maintenance is a must, only a trained technician is

allowed to do so. Integrated circuits on computer boards are

sensitive to static electricity. To avoid damaging chips from

electrostatic discharge, observe the following precautions:

zBefore handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static

electricity on your body.

zWhen handling boards and components, wear a wrist-

grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel®and Atom™are registered trademarks of Intel Corporation.

MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft

Corporation.

VIA is a trademark of VIA Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

Other brand names and trademarks are the properties and registered

brands of their respective owners.

Table of Contents

Disclaimers........................................................................ii

Safety Approvals .............................................................iii

Safety Precautions ..........................................................iv

CHAPTER 1 INTRODUCTION......................................... 1

1.1General Description..........................................1

1.2Specifications ...................................................2

1.2.1Main CPU Board........................................................ 2

1.2.2I/O System ................................................................. 3

1.2.3System Specification................................................ 3

1.3Dimensions .......................................................5

1.4I/O Outlets..........................................................7

1.5Package List......................................................8

CHAPTER 2 System Configurations ................................ 9

2.1I/O Pin Assignment...........................................9

2.1.1Serial Port Interface.................................................. 9

2.1.2Ethernet ................................................................... 11

2.2Water-proof Cables.........................................12

2.3Mounting Method............................................15

2.3.2VESA-ARM Mounting ............................................. 15

2.3.3Suspension Mounting ............................................ 16

2.4Keyboard Kit ...................................................19

CHAPTER 3 AMI BIOS SETUP UTILITY ..................... 22

3.1Starting............................................................22

3.2Navigation Keys..............................................22

3.3Main Menu.......................................................23

3.4Advanced Menu..............................................24

3.5PCI PnP Menu .................................................38

3.6Boot Menu.......................................................41

3.7Security Menu .................................................46

3.8Chipset Menu..................................................48

3.9Exit Menu.........................................................53

CHAPTER 4 DRIVERS INSTALLATION..................... 55

vii

4.1System.............................................................55

4.2Touch Screen..................................................56

4.2.1Specification ...................................................56

4.2.2Driver Installation- Windows XP ........................... 56

4.3Embedded O.S................................................60

4.3.1Windows XP Embedded......................................... 60

viii

MEMO

GOT-812 Series User’s Manual

Introduction 1

CHAPTER 1

INTRODUCTION

This chapter contains general information and detailed specifications

of the GOT-812 Series. Chapter 1 includes the following sections:

General Description

Specification

Dimensions

I/O Outlets

Package List

1.1 General Description

The GOT-812 Series is a fan-less and compact-size touch panel

computer, equipped with a 12.1” High brightness TFT LCD display

and low power consumption Intel○RAtomTM N270 1.6GHz processor

with FSB 533MHz. The GOT-812 Series supports Windows®XP,

Windows®7, Windows®CE.NET and Windows®XP embedded. The

panel computer is able to install a CompactFlash™and provided a

Mini card slot for extension such as WIFI. Its excellent ID and friendly

user interface make it a professional yet easy-to-use panel computer.

The GOT-812 Series is an ideal for space-limited applications in

factory automation, machine maker operating systems, building

automation, and more.

zGOT-812 Series: 12.1” TFT XGA/SVGA Fanless Touch

Panel Computer

¾Reliable and Stable Design

GOT-812 Series User’s Manual

Introduction

The GOT-812 Series adopts a fanless cooling system and a

CompactFlash™, which makes it suitable for vibration

environments, example for Marine and Crane.

¾Embedded O.S. Supported

The GOT-812 Series not only supports Windows®XP and

Windows®7, but also supports embedded OS, such as

Windows®CE.NET, and Windows®XP embedded. For storage

device, the GOT-815 Series supports CompactFlash™and 2.5”

SSD device.

¾Industrial-grade Product Design

The GOT-812 Series has an incredible design to be used in

different industrial environments.

zThe whole enclasure meets the IP66 standard.

zFor connecting other devices, the GOT-812 Series also features

several interfaces: USB, Ethernet, and RS-232/422/485.

1.2 Specifications

1.2.1 Main CPU Board

zCPU

Intel○RAtomTM N270 1.6GHz processor with FSB 533MHz

onboard

zSystem Chipset

945GSE + ICH7M

zBIOS

America Megatrends BIOS

zSystem Memory

One 200-pin DDR2 SO-DIMM socket

Inhaltsverzeichnis

Andere AXIOMTEK Touchscreen Handbücher

AXIOMTEK

AXIOMTEK GOT3187W-834-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT817L-511 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3157W-834-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK MPC103-845 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT-3106TL-830 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3187WL-834 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT318W-521-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK P1177E-842 Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883 Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT5840T-832 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT710S-837-R-E3845-24-110VDC Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3156T-832 Bedienungsanleitung

AXIOMTEK

AXIOMTEK PANEL1127-671 Bedienungsanleitung

AXIOMTEK

AXIOMTEK MPC175-873 Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321A-ELK-WCD Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT710-837 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT5840T-834 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT815-834 Bedienungsanleitung

AXIOMTEK

AXIOMTEK IFO2225-873 Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3126T-832 Bedienungsanleitung

AXIOMTEK

AXIOMTEK MPC170-831-DC Bedienungsanleitung

AXIOMTEK

AXIOMTEK IFO2175-850-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-502-PCT/FR Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung