Axminster Digital Height Gauge Bedienungsanleitung

210041

Digital Height Gauge

User Manual

www.axminster.co.uk

Index of Contents............................................................................................................................... 01

What’s in the Box………….………........……..…………...................................................................... 02

Illustration & Description.................................................................................................... 03-04-05-06

Maintenance....................................................................................................................................... 06

Index of Contents...

Page No.

Safety Protection Symbols

SAFETY!!

The symbols shown on the cover of this

manual advise that you wear the correct

safety protection when using this machine.

What’s in the Box...



FREEPHONE 0800 371822

Model Number: HD620

1 No. Digital Height Gauge

2 No. Spare battery

1 No. Instruction Manual

1 No. Guarantee Card

Having unpacked your digital height gauge; if you are not retaining the packaging to store

your height gauge, please dispose of the wrapping responsibly.

Congratulations on the purchase of your “Axminster Digital Height Gauge”

Digital Height

Gauge

Spare 3V Battery

Illustration & Description...

Analogue Scale

Markings

Alloy Block

Linear Scale

Digtal Readout

Function Buttons

Locking Screw

Battery

Compartment Pointer

Rare Earth Magnets

CR2032 3V Micro

Lithium Battery

Illustration & Description...

Please study the illustrations, so that you may understand the terminology we have used,

and better understand the operation of your Digital Height Gauge. Note the positions and

the functions of the various buttons on the Digital Readout, these will be more fully

explained a little later in the text:-

The gauge comprises a precision machined alloy block, into which the Linear Scale of the

Digital Readout (DRO) is bolted. This fixing is set very precisely at right angles to the base,

to ensure accurate measurement. The linear scale is also marked with Analogue Scales from

0-6” and from 0-150mm. These scales are read against the lower edge of the DRO.

There are three Rare Earth Magnets set into the base of the block, to enable/aid the gauge

to be held flat against a ferrous metal surface. Please Note. The magnets are not

sufficiently strong to support the whole weight of the gauge on a vertical surface; although

the base will remain in flat contact with the surface the gauge is liable to slip.

The digital readout is mounted on the linear scale and has an ‘L’ shaped pointer attached to

it; there is also a small Locking Screw with a serrated knob; that will clamp the DRO in

position if tightened (Do not over tighten). NOTE Please ensure the locking screw is

loosened before attempting to move the gauge.

The Battery Compartment is on the lower front face of the DRO and can be opened by a

‘press down’ and slide motion in the direction of the ‘arrow’ thumb grip. If you are replacing

the battery ensure that it is positioned with the + marking uppermost.

The ‘L’ shaped pointer is ground to a fine edge to enable the most accurate measurement; it

is also hardened so that the points can be used for scribing lines at the set height.

P.S. When scribing, please hold the pointer only, DO NOT apply pressure by gripping the

gauge proper

Picture shows the digital

height guage being used to

measure the depth of the

router cutter.

Pointer

Router Cutter

Illustration & Description...

www.axminster.co.uk

Function Buttons

a) Scale Change Button Marked in/mm/F

This button enables the scale to be altered from:-

i) metric mm’s to two places of decimal…………….. (mm)

ii) imperial to 3 ½ places of decimal (the ½ place will indicate 0.0005 if

measured) …………………..(in)

iii) imperial to 1/64” ………..(F)

b) ABS Button

This button enables the reading to be ‘split’ and totalised.

e.g.

1. Set the pointer to zero.

2. Move the pointer. DRO reads 25mm

3. Press the ABS button. DRO reads 000

4. Move the pointer. DRO reads 20mm

5. Press the ABS button DRO reads 45mm

6. Press the ABS button again DRO reads 000

7. Move the pointer. DRO reads 15mm

8. Press the ABS button. DRO reads 60mm

The illustration is given in mm’s, ABS works equally in imperial.

c) Hold Button

This button enables the reading to be ‘frozen’. The DRO will retain this reading, (as an ‘aide

memoire’?) until such time as the Hold button is pressed again. NOTE. The reading is not

held if the DRO switches off automatically.

d) ON/OFF Button

Self explanatory . In the event that you forget to ‘switch off’, the DRO is equipped with an

automatic function that will switch the device off after approximately 5mins if the gauge has

not been used during this period. Switching ‘On’ will return the gauge to its original settings.

(NOT c) The Hold Function. (See NOTE)

e) Zero Button

This button will set the DRO to 0000, at whatever position the pointer is, when the button is

pressed. The DRO will then read either positively (if the pointer is raised) or negatively

(if the pointer is lowered). NOTE Zero will remain at the position set, if automatic switch off

occurs and the DRO is turned on again.

Illustration & Description...

No Maintenance, keep clean and dry. Change battery if display is blank. Store away from

direct heat or sunlight.

Maintenance...

a)Scale Change Button

b) ABS Button

c) Hold Button

d)ON/OFF Button

e) Zero Button

Display in Metric mm’s to

two places of decimal (mm)

Display in Imperial to

3 1/2places of decimal (in)

Display in Imperial to 1/64" (F)

ABS symbol

210041

www.axminster.co.uk

Axminster Devon EX13 5PH UK

FREEPHONE 0800 371822

Digital Height Gaiuge

Inhaltsverzeichnis

Andere Axminster Werkzeuge Handbücher

Axminster

Axminster UJK Cabinet & Recess Hinge Jig Bedienungsanleitung

Axminster

Axminster Woodturner's Clubman & Goliath Chucks Bedienungsanleitung

Axminster

Axminster WS1000TA Bedienungsanleitung

Axminster

Axminster Collet Chuck System Set Bedienungsanleitung

Axminster

Axminster RTC7030 Bedienungsanleitung

Axminster

Axminster SIEG X1 Super Micro Mill Mk2 Bedienungsanleitung

Axminster

Axminster CrushGrind Shaft 195mm Bedienungsanleitung

Axminster

Axminster SIEG Super X2 Mill Bedienungsanleitung

Axminster

Axminster Pen Kit Bedienungsanleitung

Axminster

Axminster Empress Pen Kits Bedienungsanleitung

Axminster

Axminster Woodturning Deluxe Pen Press Bedienungsanleitung

Axminster

Axminster AW19FM Bedienungsanleitung

Axminster

Axminster 504633 Bedienungsanleitung

Axminster

Axminster Router Elevator Bedienungsanleitung

Axminster

Axminster CSC500C Bedienungsanleitung

Axminster

Axminster Pen Kit Bedienungsanleitung

Axminster

Axminster ujk 106843 Bedienungsanleitung

Axminster

Axminster PROFESSIONAL 103738 Bedienungsanleitung

Axminster

Axminster PROFESSIONAL AP50UE Bedienungsanleitung

Axminster

Axminster Trade Series Bedienungsanleitung

Axminster

Axminster AW19FM Bedienungsanleitung

Axminster

Axminster CSC500K Bedienungsanleitung

Axminster

Axminster Super Precision Woodturning Chuck Bedienungsanleitung

Axminster

Axminster Universal Sub Base Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung

Goobay

Goobay 97790 Bedienungsanleitung