Aztech ASX6600 Gebrauchsanweisung

HPE FlexNetwork 5120 SI Switch Series

IP Multicast

Configuration Guide

Part number: 5998-8495

Software version: Release 1516

Document version: 6W100-20151125

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard

Enterprise products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett

Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or

copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software

Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s

standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard

Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise

website.

Acknowledgments

Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the

United States and other countries.

Microsoft® and Windows® are trademarks of the Microsoft group of companies.

Adobe® andAcrobat® are trademarks ofAdobe Systems Incorporated.

Java and Oracle are registered trademarks of Oracle and/or its affiliates.

UNIX® is a registered trademark of The Open Group.

Contents

Multicast overview···························································································1

Introduction to multicast·····································································································································1

Information transmission techniques··········································································································1

Multicast features·······································································································································3

Common notations in multicast··················································································································4

Advantages and applications of multicast··································································································4

Multicast models ················································································································································4

Multicast architecture·········································································································································5

Multicast addresses ···································································································································5

Multicast protocols ·····································································································································9

Multicast packet forwarding mechanism··········································································································11

IGMP snooping configuration········································································12

IGMP snooping overview·································································································································12

Principle of IGMP snooping······················································································································12

Basic concepts in IGMP snooping ···········································································································13

How IGMP snooping works······················································································································14

IGMP snooping proxying··························································································································15

Protocols and standards ··························································································································16

IGMP snooping configuration task list··············································································································17

Configuring basic functions of IGMP snooping································································································18

Configuration prerequisites······················································································································18

Enabling IGMP snooping ·························································································································18

Configuring the version of IGMP snooping ······························································································18

Configuring static multicast MAC address entries····················································································19

Configuring IGMP snooping port functions ······································································································20

Configuration prerequisites······················································································································20

Configuring aging timers for dynamic ports······························································································20

Configuring static ports ····························································································································21

Configuring simulated joining···················································································································21

Configuring fast leave processing············································································································22

Disabling a port or a group of ports from changing into dynamic router ports ·········································23

Configuring IGMP snooping querier·················································································································23

Configuration prerequisites······················································································································23

Enabling IGMP snooping querier·············································································································24

Configuring IGMP queries and responses·······························································································24

Configuring source IP address of IGMP queries······················································································25

Configuring IGMP snooping proxying ··············································································································26

Configuration prerequisites······················································································································26

Enabling IGMP snooping proxying···········································································································26

Configuring a source IP address for the IGMP messages sent by the proxy···········································26

Configuring an IGMP snooping policy··············································································································26

Configuring a multicast group filter···········································································································27

Configuring multicast source port filtering································································································27

Configuring the function of dropping unknown multicast data··································································28

Configuring IGMP report suppression······································································································28

Configuring maximum multicast groups that a port can join ····································································29

Configuring multicast group replacement·································································································29

Configuring 802.1p precedence for IGMP messages··············································································30

Displaying and maintaining IGMP snooping ····································································································31

IGMP snooping configuration examples ··········································································································31

Group policy and simulated joining configuration example······································································31

Static port configuration example·············································································································34

IGMP snooping querier configuration example························································································37

IGMP snooping proxying configuration example······················································································39

Troubleshooting IGMP snooping configuration································································································41

Switch fails in layer 2 multicast forwarding·······························································································41

Configured multicast group policy fails to take effect···············································································42

Multicast VLAN configuration········································································43

Introduction to multicast VLAN·························································································································43

Multicast VLAN configuration task list··············································································································44

Configuring multicast VLAN·····························································································································44

Configuration prerequisites······················································································································45

Configuring user port attributes················································································································45

Configuring multicast VLAN ports············································································································45

Displaying and maintaining multicast VLAN ····································································································46

Multicast VLAN configuration examples ··········································································································46

MLD snooping configuration·········································································50

MLD snooping overview···································································································································50

Introduction to MLD snooping··················································································································50

Basic concepts in MLD snooping·············································································································51

How MLD snooping works ·······················································································································52

MLD snooping proxying ···························································································································53

Protocols and standards ··························································································································54

MLD snooping configuration task list ···············································································································54

Configuring basic functions of MLD snooping··································································································56

Configuration prerequisites······················································································································56

Enabling MLD snooping···························································································································56

Configuring the version of MLD snooping································································································56

Configuring IPv6 static multicast MAC address entries ···········································································57

Configuring MLD snooping port functions········································································································58

Configuration prerequisites······················································································································58

Configuring aging timers for dynamic ports······························································································58

Configuring static ports ····························································································································59

Configuring simulated joining···················································································································59

Configuring fast leave processing············································································································60

Disabling a port or a group of ports from changing into dynamic router ports ·········································61

Configuring MLD snooping querier ··················································································································61

Configuration prerequisites······················································································································61

Enabling MLD snooping querier···············································································································62

Configuring MLD queries and responses·································································································62

Configuring source IPv6 addresses of MLD queries················································································63

Configuring MLD snooping proxying················································································································64

Configuration prerequisites······················································································································64

Enabling MLD snooping proxying ············································································································64

Configuring a source IPv6 address for the MLD messages sent by the proxy ········································64

Configuring an MLD snooping policy ···············································································································65

Configuration prerequisites······················································································································65

Configuring an IPv6 multicast group filter ································································································65

Configuring IPv6 multicast source port filtering························································································66

Configuring dropping unknown IPv6 multicast data·················································································66

Configuring MLD report suppression ·······································································································67

Configuring maximum multicast groups that a port can join ····································································67

Configuring IPv6 multicast group replacement ························································································68

Configuring 802.1p precedence for MLD messages················································································68

Displaying and maintaining MLD snooping······································································································69

MLD snooping configuration examples············································································································70

IPv6 group policy and simulated joining configuration example·······························································70

Static port configuration example·············································································································72

MLD snooping querier configuration example··························································································75

MLD snooping proxying configuration example·······················································································77

Troubleshooting MLD snooping·······················································································································80

Switch fails in layer 2 multicast forwarding·······························································································80

Configured IPv6 multicast group policy fails to take effect·······································································80

iii

IPv6 multicast VLAN configuration································································82

Introduction to IPv6 multicast VLAN ················································································································82

IPv6 multicast VLAN configuration task list······································································································83

Configuring IPv6 multicast VLAN·····················································································································83

Configuration prerequisites······················································································································84

Configuring user port attributes················································································································84

Configuring IPv6 multicast VLAN ports····································································································84

Displaying and maintaining IPv6 multicast VLAN ····························································································85

IPv6 multicast VLAN configuration examples ··································································································85

Document conventions and icons·································································89

Conventions·····················································································································································89

Network topology icons····································································································································90

Support and other resources ········································································91

Accessing Hewlett Packard Enterprise Support ······························································································91

Accessing updates···········································································································································91

Websites ··················································································································································92

Customer self repair·································································································································92

Remote support········································································································································92

Documentation feedback ·························································································································92

Index·············································································································93

Multicast overview

NOTE:

This document focuses on the IP multicast technology and device operations. Unless otherwise

stated, the term multicast in this document refers to IP multicast.

Introduction to multicast

As a technique that coexists with unicast and broadcast, the multicast technique effectively

addresses the issue of point-to-multipoint data transmission. By enabling high-efficiency

point-to-multipoint data transmission over a network, multicast greatly saves network bandwidth and

reduces network load.

The multicast technology enables a network operator to easily provide new value-added services,

such as live webcasting, web TV, distance learning, telemedicine, web radio, real-time video

conferencing, and other bandwidth-critical and time-critical information services.

Information transmission techniques

Unicast

In unicast transmission, the information source must send a separate copy of information to each

host that needs the information.

Figure 1 Unicast transmission

In Figure 1, assume that Host B, Host D and Host E need the information. A separate transmission

channel must be established from the information source to each of these hosts.

In unicast transmission, the traffic transmitted over the network is proportional to the number of hosts

that need the information. If a large number of hosts need the information, the information source

must send a copy of the same information to each of these hosts. Sending many copies can place a

tremendous pressure on the information source and the network bandwidth.

Unicast is not suitable for batch transmission of information.

Broadcast

In broadcast transmission, the information source sends information to all hosts on the subnet, even

if some hosts do not need the information.

Figure 2 Broadcast transmission

In Figure 2, assume that only Host B, Host D, and Host E need the information. If the information is

broadcast to the subnet, HostA and Host C also receive it. In addition to information security issues,

broadcasting to hosts that do not need the information causes traffic flooding on the same subnet.

Broadcast is disadvantageous in transmitting data to specific hosts. Moreover, broadcast

transmission is a significant waste of network resources.

Multicast

Unicast and broadcast techniques cannot provide point-to-multipoint data transmissions with the

minimum network consumption. Multicast transmission can solve this problem. When some hosts on

the network need multicast information, the information sender, or multicast source, sends only one

copy of the information. Multicast distribution trees are built through multicast routing protocols, and

the information is replicated only on nodes where the trees branch.

Figure 3 Multicast transmission

In Figure 3, Host B, Host D and Host E are receivers of the information. They must join the multicast

group. The routers on the network duplicate and forward the information based on the distribution of

the group members. Finally, the information is correctly delivered to Host B, Host D, and Host E.

To summarize, multicast has the following advantages:

•Because multicast traffic flows to the farthest-possible node from the source before it is

replicated and distributed, an increase in the number of hosts will not increase the load of the

source and will not remarkably add to the usage of network resources.

•Because multicast data is sent only to the receivers that need it, multicast uses network

bandwidth reasonably and enhances network security. In addition, data broadcast is confined to

the same subnet, but multicast is not.

Multicast features

Multicast transmission has the following features:

•A multicast group is a multicast receiver set identified by an IP multicast address. Hosts join a

multicast group to become members of the multicast group, before they can receive the

multicast data addressed to that multicast group. Typically, a multicast source does not need to

join a multicast group.

•An information sender is called a "multicast source". A multicast source can send data to

multiple multicast groups at the same time, and multiple multicast sources can send data to the

same multicast group at the same time.

•All hosts that have joined amulticast group become members of the multicast group. The group

memberships are dynamic. Hosts can join or leave multicast groups at any time. Multicast

groups are not subject to geographic restrictions.

•Routers or Layer 3 switches that support Layer 3 multicast are called "multicast routers" or

"Layer 3 multicast devices". In addition to providing the multicast routing function, a multicast

router can manage multicast group memberships on stub subnets with attached group

members. A multicast router itself can be a multicast group member.

For a better understanding of the multicast concept, you can compare multicast transmission with

the transmission of TV programs.

Table 1 Comparing TV transmission and multicast transmission

TV transmission Multicast transmission

A TV station transmits a TV program through a

channel. A multicast source sends multicast data to a multicast

group.

A user tunes the TV set to the channel. A receiver joins the multicast group.

The user starts to watch the TV program

transmitted by the TV station via the channel. The receiver starts to receive the multicast data that the

source is sending to the multicast group.

The user turns off the TV set or tunes to another

channel. The receiver leaves the multicast group or joins another

group.

Common notations in multicast

The following notations are commonly used in multicast transmission:

•(*, G)—Indicates a rendezvous point tree (RPT), or a multicast packet that any multicast source

sends to multicast group G. Here the asterisk represents any multicast source, and "G"

represents a specific multicast group.

•(S, G)—Indicates a shortest path tree (SPT), or a multicast packet that multicast source S

sends to multicast group G. Here, "S" represents a specific multicast source, and "G"

represents a specific multicast group.

Advantages and applications of multicast

Advantages of multicast

The multicast technique has the following advantages:

•Enhanced efficiency—Reduces the CPU load of information source servers and network

devices.

•Optimal performance—Reduces redundant traffic.

•Distributed application—Enables point-to-multipoint applications at the price of minimum

network resources.

Applications of multicast

The multicast technique has the following applications:

•Multimedia and streaming applications, such as web TV, web radio, and real-time video/audio

conferencing

•Communication for training and cooperative operations, such as distance learning and

telemedicine

•Data warehouse and financial applications, such as stock quotes

•Any other point-to-multipoint applications for data distribution

Multicast models

Multicast models—any-source multicast (ASM), source-filtered multicast (SFM), and source-specific

multicast (SSM)—determines how the receivers treat the multicast sources.

ASM model

In the ASM model, any sender can send information to a multicast group as a multicast source, and

numbers of receivers can join a multicast group, which is identified by a group address, and can

obtain multicast information addressed to that multicast group. In this model, receivers do not

determine the positions of the multicast sources in advance. However, they can join or leave the

multicast group at any time.

SFM model

The SFM model is derived from the ASM model. To a sender, the two models appear to have the

same multicast membership architecture.

The SFM model functionally extends the ASM model. In the SFM model, the upper layer software

checks the source address of received multicast packets and permits or denies multicast traffic from

specific sources. Therefore, receivers can receive the multicast data from only part of the multicast

sources. To a receiver, not all multicast sources are valid because they are filtered.

SSM model

Users might be interested in the multicast data from only certain multicast sources. The SSM model

provides a transmission service that enables users to specify the multicast sources that they are

interested in at the client side.

The main difference between the SSM model and the ASM model is that in the SSM model,

receivers have already determined the locations of the multicast sources by some other means. In

addition, the SSM model uses a multicast address range that is different from that of the ASM/SFM

model, and dedicated multicast forwarding paths are established between receivers and the

specified multicast sources.

Multicast architecture

IP multicast addresses the following questions:

•Multicast addressing—Where should the multicast source transmit information to?

•Host registration—What receivers exist on the network?

•Multicast source discovery—Where is the multicast source that will provide data to the

receivers?

•Multicast routing—How should information be transmitted to the receivers?

IP multicast is an end-to-end service. The multicast architecture involves the following parts:

1. Addressing mechanism—A multicast source sends information to a group of receivers through

a multicast address.

2. Host registration—Receiver hosts can join and leave multicast groups dynamically. This

mechanism is the basis for group membership management.

3. Multicast routing—A multicast distribution tree—a forwarding path tree for multicast data on the

network—is constructed for delivering multicast data from a multicast source to receivers.

4. Multicast applications—A software system that supports multicast applications, such as video

conferencing, must be installed on multicast sources and receiver hosts. The TCP/IP stack

must support reception and transmission of multicast data.

Multicast addresses

Network-layer multicast addresses—namely, multicast IP addresses—enable communication

between multicast sources and multicast group members. In addition, a technique must be available

to map multicast IP addresses to link-layer multicast MAC addresses.

Andere Handbücher für ASX6600

Inhaltsverzeichnis

Andere Aztech Mischer Handbücher

Aztech

Aztech ASX6600 Bedienungsanleitung

Beliebte Mischer Handbücher anderer Marken

Bosch

Bosch GRW 9 Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman WM45E Leitfaden

KitchenAid

KitchenAid KSM7581BZ0 Kurzanleitung

Jay-Lor

Jay-Lor 5050 Bedienungsanleitung

Sunbeam

Sunbeam FPSBSM210X Bedienungsanleitung

Thinky

Thinky ARE-250 Bedienungsanleitung

Midas

Midas XL4 Bedienungsanleitung

bianco

bianco PURO 4 Bedienungsanleitung

Paso

Paso DAG9200 Bedienungsanleitung

Sima

Sima SFX-9A Bedienungsanleitung

better chef

better chef IM-815WC Montageanleitung

ALLEN & HEATH

ALLEN & HEATH GR1 Bedienungsanleitung

Lacor

Lacor 69083 Technisches Datenblatt

Buffalo

Buffalo CP921 Bedienungsanleitung

Pentair

Pentair HYPRO Cleanload 3376-0870 Betriebsanleitung

Cuisinart

Cuisinart SM50WHE Bedienungsanleitung

Hobart

Hobart HCM-300 Bedienungsanleitung

Kenwood

Kenwood Chef KM400 series Bedienungsanleitung