Aztech 100U Produktinformationsblatt

 Windows® Me, 98/98SE and 2000 are registered trademarks of Microsoft Corp.

 All other company or product names are trademarks or registered trademarks or service marks of their

respective owners.

DSL Turbo 100 USB

ADSL Modem

DSL100U

Easy Start

Read Me First

Version 1.1

Contents...

SafetyGuidelines ..................5

Aboutthis Easy Start ..................5

PackageContents ..................5

RearPanelConnections ..................6

FrontPanelLED Indicators ..................7

InstallingtheUSBADSL Modem Drivers ..................7

RunningtheModem Setup Program ................13

EstablishingtheADSL Connection ................17

DSL Test ................18

ChangingtheConfigurationValues ................18

UninstallingtheModemDrivers ................19

Troubleshooting ................20

USB ADSL Modem Easy Start

Part 15 FCC Compliance Statement

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired

operation.

Operating Environment

For Home or Office Use

Notice

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation, if this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

Caution

To comply with the limits for the Class B digital device according to Part 15 of FCC Rules, this device must be installed

in computer equipment certified to comply with the Class B limits. All cables used to connect the computers and

peripherals must be shielded and grounded. Operation with non-certified/shielded cables may result in radio/TV

interference.

Modification

Any modification not expressly approved by the manufacturer of this device could void the users authority to

operate the device.

Party Responsible for Product Compliance:

Aztech Labs, Inc.

45645 Northport Loop East

Fremont, CA 94538, U.S.A.

USB ADSL Modem Easy Start

Part 68 FCC Compliance Statement

(FCC ID : 4J2SNG-47095-DL-N)

This equipment complies with Part 68 of the FCC Rules. On the equipment is a label that contains, among other

information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested,

this information must be provided to your telephone company.

Connection to the telephone network should be made by using standard modular telephone jack type RJ11.

The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all

of those devices ring when your telephone number is called. In most, but not all areas, the sum of the RENs of

all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may

connect to your line, as determined by the REN, you should contact your local telephone company to determine

the maximum REN for your calling area.

If your telephone equipment causes harm to the telephone network, the telephone company may discontinue your

service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you will be

notified as soon as possible. You will be informed of your right to file a complaint with the FCC.

Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect

the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity

to maintain uninterrupted telephone service.

In the event this equipment should fail to operate properly, disconnect the unit from the telephone line. Try using

another FCC approved telephone in the same telephone jack. If the trouble persists, call the telephone company

repair service bureau. If the trouble does not persist and appears to be with this unit, disconnect the unit from the

telephone line and discontinue use of the unit until it is repaired. Please note that the telephone company may

ask that you disconnect this equipment from the telephone network until the problem has been corrected or until

you're sure that the equipment is not malfunctioning.

This equipment may not be used on coin service provided by the telephone company. Connection to party lines

is subject to state tariffs.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other

electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin

at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent

and an identification of the business or other entity, or individual sending message and the telephone number of

the sending machine or such business, or entity, or individual.

This user information can be programmed in the communication software you are using with your equipment.

Repair or Service Information

In the event of the need for service or repair, carefully package the unit along with a note of the problem and send

it to the address below or the authorized service center nearest you. Be sure to include your address (not a P.O

Box), telephone number and best time to call.

Attn: Aztech Labs, Inc.

45645 Northport Loop East

Fremont, CA 94538, U.S.A.

USB ADSL Modem Easy Start

Industry Canada Information

NOTlCE: The Industry Canada label identifies certified equipment. This certification means the equipment meets

telecommunications network protective, operational and safety requirements as described in the appropriate

Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment

will operate to the users satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the

local telecommunications company. The equipment must also be installed using an acceptable method of connection.

The customer should be aware that compliance with the above conditions may not prevent degradation of service

in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs

or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications

company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone

lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly

important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric

inspection authority, or electrician, as appropriate.

NOTICE:

The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum

number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist

of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers

of all of the devices does not exceed 5.

USB ADSL Modem Easy Start

Package Contents

Please check that you have the following items in your package. If you found any missing

items, please contact your dealer immediately.

(The actual cables that come with your package may differ in appearance from country to

country)

Telephone

extension cable

this Easy Start

USB cable

Installation CD

Productwarranty doesnot applytodamage causedby lightning,power surgesorwrong voltage.

·¸

¹º

DSL100U

Safety Guidelines

•Keep the modem away from fluid, direct sunlight and excessive heat

•During times of lightning strike/thunderstorm, do not use the modem

•This product is for use only in UL Listed computers

•To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord

About this

Easy Start This booklet contains information on setting up your ADSL

modemDSL100U

Ittouchesonthe key installation procedures

to help you setup your modem in a breeze!

USB ADSL Modem Easy Start

Rear Panel Connections

With the "Hot Swap" feature in this modem, you can connect your modem to your computer

anytime, without having to power off your system!

The following illustration shows the connections for the modem.

ÊOne end of the USB cable ( ) is to be connected to theUSB Port on the

modem and the other end ( ) to the USB port of your computer.

ËOne end of the telephone extension cableis to be connected to the Line Jack on

the modem and the other end to a telephone wall socket.

ÌAtelephone set can be connected to theTel Jackon the modem. There is no need

to connect a micro-filter in-between as it is already built-in.

(This optional connection enables you to use your telephone and your modem

concurrently.)

Telephone

set

Telephone

wall socket

Telephone

extension

cable

ÊÌ

USB cable

USB port

USB Port TEL

jack

LINE

jack

USB ADSL Modem Easy Start

Power:

Lights up

when power is supplied via the USB port

ADSL Link:

Flashes during training. Lights up

when ADSL connection is

established

Front Panel LED Indicators

The LED indicators show the following status:

Power

ADSL Link

Installing the USB ADSL Modem Drivers

The drivers that are included with this modem are for the RFC 2364 (WAN) protocol.

Start Windows. Connect the USB cable between the USB port of your computer

and the USB port of your modem as illustrated in Rear Panel Connections.

Your would be prompted to install the drivers.

Place the Installation CD into your CD-ROM Drive.

Continue with the following steps depending on the Operating System that you

are running.

USB ADSL Modem Easy Start

Windows®Me

Ifyouhave left the defaultoptionas

Automatic search for a better

driver (Recommended) after the

Installation CD is placed into the CD-ROM

drive, Windows Me will auto-search for the

driver and you will be brought to Step 5.

Alternatively

, select theSpecify the location

of the driver (Advanced) option and then

click Next.

Click Specify a location

and then browse to your

CD-ROMdrive. ClickNext.

Windows will prompt that

the driver is found. Click

Next.

USB ADSL Modem Easy Start

ClickFinish.Installationof

the setup program will

commence. Refer to

Running the Modem

Setup Program section.

Windows®98SE/98

Click Next to

start the search

for drivers.

SelectSearch for the best

driver for your device

(Recommended) and click

Next.

USB ADSL Modem Easy Start

Select Specify a location,

andthen browse toyour CD-

ROM drive. Click Next.

Windowswillprompt that the

driver is found. Click Next.

Click Finish. Installation of

the setup program will

commence. Refer to

Running the Modem

Setup Program section.

Andere Handbücher für 100U

Inhaltsverzeichnis

Andere Aztech Modem Handbücher

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech MSP3880W Series Bedienungsanleitung

Aztech

Aztech DSL901E Bedienungsanleitung

Aztech

Aztech ADSL PCI Modem Produktinformationsblatt

Aztech

Aztech MR8800-U Bedienungsanleitung

Aztech

Aztech DSL700P Bedienungsanleitung

Aztech

Aztech DSL5028EN Gebrauchsanweisung

Aztech

Aztech 305E Bedienungsanleitung

Aztech

Aztech DSL305E Gebrauchsanweisung

Aztech

Aztech MSP2950-W Bedienungsanleitung

Aztech

Aztech 100U Produktinformationsblatt

Aztech

Aztech DSL600E(C) Bedienungsanleitung

Aztech

Aztech HW550-3G Gebrauchsanweisung

Aztech

Aztech MSP3880U Series Bedienungsanleitung

Aztech

Aztech MR2800-W Bedienungsanleitung

Aztech

Aztech 56K External Modem Produktinformationsblatt

Aztech

Aztech DSL500U Produktinformationsblatt

Aztech

Aztech MDP3880 Bedienungsanleitung

Aztech

Aztech ADSL USB Modem Gebrauchsanweisung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech DSL700P Bedienungsanleitung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech EM6800 Bedienungsanleitung

Aztech

Aztech MSP2950(W) Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung