Aztech ADSL 4 Port Ethernet Router Produktinformationsblatt

ADSL 4 Port Ethernet Router

Easy Start

Version 1.0

• Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage.

• This product is for use only in UL Listed computers.

Contents

Introduction .......................................................2

Minimum System Requirements ...........................2

ADSL Router Package ......................................... 2

ADSL Router Overview ........................................3

Typical ADSL Router Connections .........................4

Step 1: Connecting the ADSL Router to Your

Computer/Notebook ................................5

Step 2: Configuring Your Ethernet Network Card ... 9

Step 3: Configuring Your Internet Browser ............11

Step 4: Connecting to the Internet ....................... 12

Appendix A - Configuring Your ADSL Router for a New

Connection Profile...............................................13

Easy StartEasy Start

Easy Start

Introduction

Thank you on your purchase of the ADSL 4 Port Ethernet Router! The ADSL Router provides

you with the high speed multi-user broadband access via ADSL.

The ADSL Router can be connected to any computer(s)/notebook(s) with a 10/100 Base-

T Ethernet Network card. Its Auto MDIX Ethernet Ports allow both Straight and Cross

Ethernet Network cables to be used.

This documentation assumes that your computer/notebook already has an Ethernet Network

card installed.

Minimum System Requirements

• Pentium®MMX 233MHz with Ethernet Network card (installed with TCP/IP Protocol)

• Operating system support: OS independent (also depending on the Ethernet Card's

manufacturer's driver support for the Computer/Notebook)

Windows® configurations discussed: Windows® 98 / Windows® 98 Second Edition

/ Windows® Me / Windows® XP / Windows® 2000

• Web Browser support:

Microsoft Internet®Explorer™ 4.0 (or later versions)

Netscape® Navigator 4.7 (or later versions)

ADSL Router Package

oTelephone cable (RJ-11) 1

mEasy Start

1 The telephone extension cable used for this Router is a UL Listed Communication Circuit Accessory, minimum 26AWG.

2 Different countries are bundled with different types of power adapter. The above illustration is only a representative.

3 Depending on your country of purchase, your package may or may not come with a POTS Splitter. The POTS Splitter is required

if you are connecting a Telephone Set to the ADSL Router. Please refer to Step 1.2 - Connecting to the ADSL Line for details. POTS-

Splitter can also be purchased from your dealer.





POTS Splitter

(optional) 3

lADSL 4-Port

Ethernet Router

qRouter Documentation CD

nCAT-5 UTP Straight

Ethernet Network cable (RJ-45)

p



Power adapter (DC 5V) 2

Easy StartEasy Start

Easy Start

ADSL Router Overview

lPower LED

Lights up when Power switch (at

the rear) is pressed ON.

m10/100 LINK/ACT (1 to 4)

Lights up when the Ethernet link

is established.

lSwitch

To power on or off the ADSL Router.

(O- OFF position; I- ON position)

mDC5V

To connect to the Power Adapter that

comes with your package.

n10/100 BASE TX SWITCH (1 to 4)

10 / 100 Base-TX Ethernet jack (RJ-

45) to connect to your Ethernet card or

Ethernet Switch/Hub.

oReset

To reset your ADSL Router to factory default settings. All customised settings that

you have saved will be lost! Refer to the footer4on how to activate the reset function.

pADSL

Telephone jack (RJ-11) to connect to the ADSL Line.

4To activate the reset function:

- Ensure that the ADSL Router is powered on.

- Use a pencil tip or a paper clip to depress the reset button for about 5 seconds and release. DO

NOT POWER OFF OR RESTART THE ADSL ROUTER FOR THE NEXT 20 SECONDS! This is to allow

sufficient time for the Router to complete the reset function. The factory default settings will be

restored.

noplm

mln

Flickers at a slower interval when there is data transfer at 10 Mbps.

Flickers at a faster interval when there is data transfer at 100 Mbps.

nADSL

Lights up when the ADSL Line is established.

Flickers at a slower interval when ADSL Router is trying to establish an ADSL

connection with your ADSL Service Provider.

Flickers at a faster interval when there is data transfer.

Easy StartEasy Start

Easy Start

Typical ADSL Router Connections

Up to 4 PCs Connections

For More than 4 PCs Connections

To connect to more than 4 computers/notebooks, you may further expand one of the Ethernet

Ports via an Ethernet Hub/Switch. For details on how to connect to the Ethernet Switch/

Hub, please refer to the documentation that comes with the unit.

to Computers/Notebooks with

Ethernet Network Cards

Computers or Notebooks with

Ethernet Network Cards

Ethernet

Switches/Hubs

to Computers/Notebooks with

Ethernet Network Cards

Computers or Notebooks with

Ethernet Network Cards

ADSL Router

Easy StartEasy Start

Easy Start

Step 1: Connecting the ADSL Router to Your

Computer/Notebook

Power off your Computer/Notebook or/and any connected devices before

connecting to the ADSL Router!

Step 1.1 Connecting to the Power Outlet

Connect the other end of the

Power Adapter to the Power

Outlet.

Back view of the

ADSL Router

Step 1.2 Connecting to the ADSL Line

To connect the ADSL Router to the ADSL line, carried out Step 1.2(a).

To connect the ADSL Router to the ADSL line and a Telephone Set, carried out Step 1.2(b).

(a) To connect to the ADSL line

Back view of the

ADSL Router

Telephone Wall

Socket

Telephone cable

Easy StartEasy Start

Easy Start

(b) To connect to the ADSL line and a Telephone Set

Telephone cable

Back view of the

ADSL Router

Telephone Wall

Socket

The POTS Splitter (with built-in Micro-Filter) is a device that allows you to connect

both your ADSL Router and Telephone Set to the same Telephone Wall Socket. This

device will help to eliminate background noise on the telephone line, ensuring the

best possible phone performance. (When purchasing POTS Splitter from your

dealer, ensure that it has a built-in Micro-Filter).

Telephone Set

POTS Splitter

Connect the Telephone set to the

jack labelled TEL or PHONE and

the telephone cable to the jack

labelled LINE.

If you have Telephone set(s)/Facsimile

machine connected to other Telephone

Wall Socket(s), you will need to plug

in a Micro-Filter to each of the

Telephone Wall Socket before

connecting to the Telephone set as

illustrated.

Micro-Filter helps to eliminate noise

on the telephone line when your ADSL

Router and Telephone set are both

sharing the same line.

(Micro-Filter can be purchased from

your dealer).

Easy StartEasy Start

Easy Start

Step 1.3 Connecting to the Ethernet

Connect your computer(s)/notebook(s) to the ADSL Router as illustrated. The following

illustration shows the connection of a single computer.

Back view of a computer

Ethernet Network cable

Ethernet Port

Back view of

the ADSL

Router

Ethernet

Network Card

(All the Ethernet

Ports on the ADSL

Router are Auto

MDIX. Both Straight

and Cross Ethernet

Network cables can

be used).

To connect the ADSL Router to your Computer/Notebook, you need to have an Ethernet Port present

on your Computer/Notebook.

(See the following note if you are not sure of how an Ethernet Port looks like).

Locating the Ethernet Port on your Computer/Notebook

The following are some tips to help you locate your Ethernet Port on your

Computer/Notebook. Alternatively, you may refer to the documentation that

comes with your Computer/Notebook.

Most Computers/Notebooks have labels describing the Ports. For Ethernet Port,

you will see either ETHERNET,ETH or RJ45 labelled near the Port.

If your Computer/Notebook does not have such descriptions, try the following.

-Picture A gives the illustration of an Ethernet Port. All Ethernet Ports have 8

conductors on it. Do not mistaken with the LINE Port (Picture B) that has only

6 conductors.

- An Ethernet Port is slightly bigger than a LINE Port.

A. ETHERNET: B. LINE:

Easy StartEasy Start

Easy Start

Step 1.4 Checking Your Connections

Please check your connections before proceeding.

Step 1.5 Powering Up

-Power on the Power Outlet that the ADSL Router is connected to.

-Power on your Computer(s)/Notebook(s).

Proceed to Step 2.

LINE

ETHERNET

DC 5V

To your Power Outlet

To the Ethernet Port on your

Computer(s)/Notebook(s)

To your Telephone Wall

Socket (ADSL line)

Easy StartEasy Start

Easy Start

2.1 For Windows®98 / Windows®Me

iii Click on the IP Address tab.

Click the option Obtain an IP address

automatically and click OK to save

the settings.

Ensure that your ADSL Router is powered

on. Restart your system.

Proceed to Step 3.

iFrom your Windows desktop, right-click on the Network Neighborhood icon. Select

Properties.

ii From the Configuration tab, select TCP/IP-> xxx where xxx refers to the model of your

Ethernet Network Card that is connected to the ADSL Router.

Click Properties.

Step 2: Configuring Your Ethernet Network Card

This documentation assumes that your computer/notebook is already installed with an

Ethernet Network card.

For multiple users connection, please ensure that all your computers/notebooks are configured

with the following settings.

(This screen shot uses 3Com EtherLink

Ethernet card model as an example).

Easy StartEasy Start

Easy Start

ii Ensure that the field Connect Using indicates the model of your Ethernet Network Card

that is connected to your ADSL Router.

(This is important especially if you have more than one Local Area Connection icons displayed

at the Network and Dial-up Connections / Network Connections window. Ensure that you have

selected the correct one.)

Select Internet Protocol (TCP/IP) and click Properties.

iii Select the option Obtain an IP

address automatically and click OK.

Click OK again to close.

Proceed to Step 3.

2.2 For Windows®2000 / Windows®XP

iWindows® 2000:

a) From your Windows desktop, right-click on the icon My Network Places and

select Properties.

b) At the Network and Dial-up Connections window, right-click on the Local Area

Connection icon and select Properties.

Windows® XP:

(Instructions are based on default Start menu option)

a) From your Windows desktop, click Start >All Programs > Accessories >

Communications > Network Connections.

b) Right-click on the Local Area Connection icon that reflects the model of your

Ethernet Network Card that is connected to the ADSL Router and click

Properties.

(This screen shot uses 3Com EtherLink

Ethernet card model as an example).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Aztech Netzwerk-Router Handbücher

Aztech

Aztech DSL605E Gebrauchsanweisung

Aztech

Aztech WL830RT4 Gebrauchsanweisung

Aztech

Aztech HW831 Bedienungsanleitung

Aztech

Aztech ADSL2+ Ethernet Router Bedienungsanleitung

Aztech

Aztech DSL5029EN(1T1R) Gebrauchsanweisung

Aztech

Aztech WMB260AC Bedienungsanleitung

Aztech

Aztech DSL600EWR Produktinformationsblatt

Aztech

Aztech DSL TurboRouter 258E Bedienungsanleitung

Aztech

Aztech na8300 Produktinformationsblatt

Aztech

Aztech WMB260AC Bedienungsanleitung

Aztech

Aztech DSL600E Produktinformationsblatt

Aztech

Aztech DSL8800GR Gebrauchsanweisung

Aztech

Aztech WL730RT4 Bedienungsanleitung

Aztech

Aztech HW550-3G Merkblatt

Aztech

Aztech DSL5005EN Gebrauchsanweisung

Aztech

Aztech MWR638 Bedienungsanleitung

Aztech

Aztech DSL605ER Gebrauchsanweisung

Aztech

Aztech SDSL Bridge & Router Bedienungsanleitung

Aztech

Aztech Ethernet USB Combo Router Bedienungsanleitung

Aztech

Aztech 4-Port Wireless G Router Bedienungsanleitung

Aztech

Aztech DSL906 1DA Series Produktinformationsblatt

Aztech

Aztech DSL5008EN Gebrauchsanweisung

Aztech

Aztech DSL9100R Bedienungsanleitung

Aztech

Aztech HW550-RT4 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise