Bang & Olufsen BEOLAB 28 Bedienungsanleitung

BEOLAB 28

User Guide

Betjeningsvejledning

Bedienungsanleitung

Guía del usuario

Mode d’emploi

Guida utente

ユーザーガイド

사용 설명서

Gebruikershandleiding

Guia do utilizador

Руководство пользователя

Användarhandbok

用户指南

使用者指南

BEOLAB 28

Get started.

ENGLISH

INTRODUCTION

This guide contains additional

information about the daily use of

your Bang & Olufsen product and

connected products and describes the

features and functions of your Beolab

28 in more detail.

Your Beolab 28 can be used as a

stereo music system as well as a pair

of stereo speakers for your Bang &

Olufsen television.

We recommend that your retailer

deliver, install and set up your Beolab

28, especially if they are wall mounted.

Your Bang & Olufsen retailer is your

ﬁrst stop for all your service queries.

To ﬁnd your nearest retailer, see

www.bang-olufsen.com

To set up your product, download the Bang & Olufsen App from the Google Play

Store or Apple App Store.

From this app you can set up your product and get the full Bang & Olufsen

experience. Unlock the full product experience of audio personalisation, product

support and new features at your ﬁngertips.

When you ﬁrst start the Bang & Olufsen App, you will be asked to create a user

account.

To set up your speaker, click to add a new product. If you already have an account

this can be found under settings.

DOWNLOAD THE BANG & OLUFSEN APP

BEOLAB 28

REMEMBER WHEN SETTING UP

Make sure the products are assembled and set up correctly and according to the

assembly instructions.

You can set up a stereo pair in the Bang & Olufsen App. When you set up your

second Beolab 28 you will be asked if you want to set them up as a stereo pair.

This is something you can also always do later under Sound settings on the product

page of your Beolab 28 in the Bang & Olufsen App.

During ﬁrst time setup, make sure the product is connected to a network and

software is updated prior to connecting them with a Bang & Olufsen television. This

is all done through the Bang & Olufsen App.

When setting up your Beolab 28 as a stereo pair, make sure that all input cables are

connected to the same speaker, which should be set up as the primary speaker of

the pair.

DAILY USE

The touch surface on top of your Beolab 28 will light up when you approach, ready

for you to control your music.

Tap to play or pause

Swipe in a circle near the edge to control volume

Tap on the arrows to switch tracks

Tap the Bluetooth button to switch it on or o

Note: In a stereo pair, the Bluetooth and microphone buttons are disabled on the

secondary speaker. To operate these functions, use the buttons on the primary

speaker.

BEOLAB 28

FAVOURITES

Beolab 28 has four favourite buttons, where you can save your favourite listening

experiences.

Radio

On your product page in the Bang & Olufsen App, go to Radio and then Search to

pick a station.

Tap the More icon to assign it to a favourite.

Press the favourite button the next time you want to hear the station quickly.

Spotify Connect

Use Spotify Connect on the Spotify music streaming app to connect to your Beolab

28.

Play a favourite radio station or playlist, like “Jazz” or your “Discover Weekly” to the

speaker via Spotify Connect and long press your chosen favourite button to assign

it.

Access your favourite again anytime with a short press of the button.

CONNECT YOUR MUSIC

Connect your favourite music app to your Beolab 28 by using Apple AirPlay 2,

Chromecast or Bluetooth and play wirelessly.

Use Airplay 2 or Chromecast to seamlessly connect your dierent wireless speakers

into one system, allowing you to control speakers in tandem or individually.

Long press the Bluetooth icon to enable or cancel Bluetooth pairing.

SOURCES

You have multiple options for playing music on your Beolab 28 through the

following sources:

Bang & Olufsen Radio

Stations available through the B&O

App and Favourites.

AirPlay 2 & Chromecast

Streaming and multiroom capabilities.

Spotify Connect

Streaming and Favourites.

Bluetooth 5.0

Streaming available out of the box

even if the product is not connected to

internet.

Line-in/Optical

Connect 3rd party audio products.

Powerlink

B&O TV/Audio system.

Wireless Powerlink

B&O TV/Audio system.

BEOLAB 28

BEAM WIDTH CONTROL

With Beolab 28 you can change the width of the sound for optimised sound for

dierent experiences.

When the curtains are pulled back, the speaker is playing in WIDE mode.

WIDE mode is for more “Social” or passive listening situations. This will ensure that

there is a more equal distribution of the direct sound across a wider listening area

in the room.

When the curtains are closer together, the speaker is in NARROW mode.

NARROW mode is for the “Sweet spot” or active listening and delivers precise

stereo imaging for active listening. It is able to reduce the amount of energy in the

reﬂections o the side walls of the listening room.

LISTENING MODES

Listening Modes consists of a wide range of controls that allows you to adjust

the sound to your personal preference or to optimize for the current listening

experience. Listening modes can be selected and customised in the Bang & Olufsen

App on your Beolab 28 product page.

Listening Modes on Beolab 28 are equivalent to Speaker Presets on a Bang &

Olufsen television.

You can save your own personally adjusted settings as Listening Modes, so they can

easily be accessed again, or use the predeﬁned settings designed for Beolab 28:

Optimal, Speech and Social.

For each Listening Mode you are able to deﬁne the following control parameters:

Beosonic

Advanced digital sound algorithms developed by our acoustics team allows you to

explore dierent audio spaces by simply moving the circle around.

Beam Width Control

Adjust whether the Beam Width in a Listening Mode is set as WIDE or NARROW.

Active Room Compensation

Active Room Compensation gives you an optimal tuning of your Beolab 28

according to the room it is placed in. You are able to select whether this tuning

ﬁlter is turned on or o to a given Listening Mode.

Speaker Preset

Speaker Presets are used when Beolab 28 is connected to a Bang & Olufsen

television, to set up speaker groups.

Select the Speaker Preset number as the identiﬁcation number for adding the

speaker groups in the television menu, which you can conﬁgure in the menu under

Listening Mode – Advanced.

Each preset is uniquely identiﬁed by a numerical ID in the range (0-99). This

number is sent from the television through Powerlink or Wireless Powerlink data

when a Speaker Group is selected.

Speaker preset number is the Listening mode identiﬁcation number and it is

selected in the Speaker Group in the television menu.

WIDE NARROW

BEOLAB 28

CONNECTING TO A BANG & OLUFSEN TELEVISION

You can use your Beolab 28’s as a stereo pair together with a Bang & Olufsen

television, either through Power Link cables or wirelessly through Wireless Power

Link.

During the ﬁrst-time setup in the Bang & Olufsen app, you will have the option of

selecting which type of connection you will use between your Beolab 28’s and your

television.

When Power Link is selected, it is permanently enabled and you can always connect

cables to your television.

By selecting Wireless Power Link, the wireless pairing will be open for 15 minutes.

This selection can always be changed or restarted in Product settings menu in the

Bang & Olufsen App.

Find the relevant instructions for how to set them up with your television, in the

guide for your Bang & Olufsen television model.

Once connected to the television, the user interface on top of the speakers will be

disabled, except for the status LED in the middle.

The speakers will behave as a secondary system and are controlled and operated

through the television.

Depending on the type of television, dierent cables and adaptors are needed.

Cables and adaptors are available from your Bang & Olufsen retailer.

If you want to connect two speakers to one PL socket on the Soundcenter or

television, it is not possible to loop the cable between the speakers, an extra Power

Link splitter is needed, contact your Bang & Olufsen retailer for more information.

BEOLAB 28

Nice to know. NETWORK CONNECTIONS

You have dierent options for connecting your Beolab 28’s to a network.

You can connect them wirelessly through Wi-Fi, which can be set up in the Bang &

Olufsen App.

You can connect each speaker separately by cabled LAN connection.

You can connect the primary speaker to a LAN output and daisy-chain the

secondary speaker to the primary speaker.

AUDIO QUALITY FOR STEREO PAIRED SPEAKERS

When your speakers are paired together you can select the quality of the audio

streaming between them in the Bang & Olufsen App.

The default mode is High Quality Compression to reduce the probability of

dropouts when the network is congested. In installations with a wider-bandwidth

network connection, it is possible to adjust the signal to an uncompressed audio

signal, providing the highest possible audio performance.

CONNECTIONS

You can ﬁnd the connection panel under the fabric cover on the speaker. You will

need to remove the curtains and the inner fabric covers to access the connection

well.

Wired connections:

Power Link

3,5mm minijack / optical input

Ethernet x 2

USB-C (for service)

USB-A (for service)

Wireless connections:

Wireless Power Link

WiSA

Apple AirPlay 2

Google Chromecast

Bluetooth 5.0

Wi-Fi b/g/a/n/ac (Wi-Fi 5)

BEOLAB 28

LIGHT INDICATOR

The light indicator shows the status of the product. Please select a colour below.

ACTION INDICATION

White

Solid Connected to network, ready for use

Flashing slowly Starting up

Flashing quickly Room compensation in progress

Blue

Solid (5 sec) Connected/ Bluetooth paired

Pulsing Open for pairing

Red

Solid Static error, please call service

Flashing Transient error, e.g. overheating

Amber

Solid No network connection, connection lost

Flashing Ready for network setup

Pulse Connecting to network

Green

Pulsing Software update in progress

Magenta

Solid (5 sec) Connected/ Stereo Paired

Pulsing Pairing Wireless Power Link

BEOLAB 28

ACCESS POINT (AP) RESET

You can connect your Beolab 28 to a new wireless network or reset the connection,

by holding the next and previous buttons on the top plate at the same time for 3

seconds. You will hear a sound prompt and the status indicator will turn amber.

In the product settings of the Bang & Olufsen app, select Re-Setup to connect the

speaker to Wi-Fi.

FACTORY RESET

You can restore factory settings by pressing and holding the next and previous

buttons on the top plate at the same time for 8 seconds.

Your speaker will begin the reset process and after approximately one minute, your

Beolab 28 will be ready for ﬁrst-time set-up again.

CURTAINS

The curtains move as your Beolab 28 turns on or o as well as shows the beam

width.

You can exchange the curtains, if you would at some point like to change the

appearance of your Beolab 28.

Be aware, that if you manually move the curtains of your Beolab 28 there is a

possibility that they will detach from the brackets in either the bottom or the top.

If the curtains are not mounted correctly there is a risk they can fall o during

movement and will be damaged.

If you move the curtains manually, make sure that they are still properly attached to

the top and bottom, you will hear a “click” sound as they snap into place.

Find instructions for how to assemble and detach your curtains here.

Andere Handbücher für BEOLAB 28

Inhaltsverzeichnis

Andere Bang & Olufsen Sprecher Handbücher

Bang & Olufsen

Bang & Olufsen Beolit 15 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoSound 3 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 17 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beolit 17 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 20 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 9 6217 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 5 6881 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beolab 8 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 9 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beolit 12 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoPlay A9 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beosound Emerge Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beovox RL Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoSound 2 3rd Generation Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beosound A5 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab Penta Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 19 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEOLAB 6002 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoLab 6000 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Balance Beosound Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beosound A1 2nd Gen Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beolit 15 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BOHBLR Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Celestial BOC100 Series Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung