Bannon 57502 Bedienungsanleitung

READ & SAVE THESE INSTRUCTIONS

175-Lb. Drywall and Panel Hoist

Owner’s Manual

WARNING: Read carefully and understand all ASSEMBLY AND OPERATION

INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

precautions may result in serious personal injury.

Item #57502

Page 2 of 24

Thank you very much for choosing a Bannon™product!

For future reference, please complete the owner’s record below:

Serial Number/Lot Date Code: ________________________________

Purchase Date: ____________________________________________

Save the receipt, warranty, and this manual. It is important that you read

the entire manual to become familiar with this product before you begin

using it.

This drywall and panel hoist is designed for certain applications only.

Northern Tool and Equipment is not responsible for issues arising from

modification or improper use of this product such as an application for

which it was not designed. We strongly recommend that this product not

be modified and/or used for any application other than that for which it

was designed.

For technical questions, please call 1-800-222-5381.

Page 3 of 24

Table of Contents

Intended Use..........................................................................................................................................4

Packaging Contents..............................................................................................................................4

Technical Specifications......................................................................................................................4

Important Safety Information...............................................................................................................4

Specific Operation Warnings...............................................................................................................6

Main Parts of Panel Lifter.....................................................................................................................7

Assembly Instructions..........................................................................................................................8

Before Each Use..................................................................................................................................11

Operating Instructions........................................................................................................................11

After Each Use.....................................................................................................................................19

Maintenance ........................................................................................................................................19

Troubleshooting..................................................................................................................................20

Parts Diagram......................................................................................................................................21

Parts List..............................................................................................................................................21

Replacement Parts..............................................................................................................................22

Limited Warranty.................................................................................................................................23

Page 4 of 24

Intended Use

The Bannon 175-Lb. Drywall and Panel Hoist can lift plasterboard in every position: horizontal (ceiling

installation), angled (sloping ceiling installation), and vertical (wall installation). It’s the only panel and

drywall hoist that can be operated manually and automatically with power drill assistance. Its rack and

pinion system allows you to lift plasterboards with less effort than others panel and drywall hoists. It

has an innovative braking system with handles (main brake and safety brake) to lower the panel

quickly with control.

Packaging Contents

Arm (2)

Support base for power drill (1)

13/4" screw (2)

Arm pipe (2)

Wooden platform (1)

2 1/4" screw (6)

Top rack (1)

Side foot (2)

2 5/8" screw (1)

Main body (1)

Integrated extension (1)

Middle foot (1)

Balance bar with 2 wheels (1)

3 1/8" screw (2)

Nut (11)

Technical Specifications

Property

Specification

Maximum loading weight

175 lb.

Maximum board dimensions

4’ x 14’

Minimum board dimensions

0.49’ x 1.97’

Maximum height with extension part

14’

Maximum height without extension part

11.48’

Minimum height

5.28’

Maximum vertical lifting height with 8.2 Ft height board

20.51’

Board loading height (without extension)

2.76’

Minimum width in moving/storage position

243/4"

Total gross weight

117 lb.

Important Safety Information

⚠WARNING

Read and understand all instructions. Failure to follow all instructions may result in serious injury

or property damage.

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or

situations that could occur. Exercise common sense and caution when using this tool. Always be

aware of the environment and ensure that the tool is used in a safe and responsible manner.

Do not allow persons to operate or assemble the product until they have read this manual and

have developed a thorough understanding of how it works.

Do not modify this product in any way. Unauthorized modification may impair the function and/or

Page 5 of 24

safety and could affect the life of the product. There are specific applications for which the product

was designed.

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger

industrial equipment. There are certain applications for which this equipment was designed. This

product will be safer and do a better job at the capacity for which it was intended. DO NOT use

this equipment for a purpose for which it was not intended.

Industrial or commercial applications must follow OSHA requirements.

⚠WARNING

WORK AREA SAFETY

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.

Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas

may put you dangerously close to cutting tools and rotating parts.

Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence

of flammable liquids, gases, or dust. The product can create sparks, which may ignite the

flammable liquids, gases, or dust.

Do not allow the product to come into contact with an electrical source. The tool is not insulated

and contact will cause electrical shock.

Keep children and bystanders away from the work area while operating the tool. Do not allow

children to handle the product.

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your

work area. Some of these hazards may be hidden from your view and may cause personal injury

and/or property damage if contacted.

⚠WARNING

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use

the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of

inattention while operating the tool may result in serious personal injury.

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving

parts. Air vents on the tool often cover moving parts and should be avoided.

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety

goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in

dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems,

and hearing protection when appropriate. This applies to all persons in the work area.

Do not overreach. Keep proper footing and balance at all times.

Remove keys or wrenches before connecting the tool to an air supply, power supply, or turning on

the tool. A wrench or key that is left attached to a rotating part of the tool may cause personal

injury.

Page 6 of 24

Secure the work with clamps or a vise instead of your hand when practical. This safety precaution

allows for proper tool operation using both hands.

⚠CAUTION

HOIST USE AND CARE

Do not force the hoist. Products are safer and do a better job when used in the manner for which

they are designed. Plan your work, and use the correct product for the job.

Check for damaged parts before each use. Carefully check that the product will operate properly

and perform its intended function. Replace damaged or worn parts immediately. Never operate the

product with a damaged part.

Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with

the power switch is dangerous and must be repaired by an authorized service representative

before using.

Disconnect the power/air supply from the product and place the switch in the locked or off position

before making any adjustments, changing accessories, or storing the tool. Such preventive safety

measures reduce the risk of starting the tool accidentally.

Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.

Inspect the tool for good working condition prior to storage and before re-use.

Use only accessories that are recommended by the manufacturer for use with your product.

Accessories that may be suitable for one product may create a risk of injury when used with

another tool. Never use an accessory that has a lower operating speed or operating pressure than

the tool itself.

Keep guards in place and in working order. Never operate the product without the guards in place.

Specific Operation Warnings

⚠WARNING

To avoid injury, slide bar lock must be fully engaged if winch assembly is extended.

Wear ANSI Z87.1 compliant safety goggles, hard hat, heavy duty gloves, and steel toed boots

during setup and use.

Do not exceed the rated load capacity.

Do not use to transport people or pets.

Secure load before raising or lowering load.

Only use the hoist to raise and lower one panel at a time.

Never load a drywall panel or operate the hoist if the lock pins are not engaged at one of the three

positions.

Use ONLY for lifting a drywall panel.

To avoid serious injury, watch for overhead obstructions when raising panel.

Page 7 of 24

Be sure the winch components are clean and dry before operation.

Inspect the tool for wear or damage. Pay special attention to any wear or damage to the wire rope.

Carefully inspect the hoist before operating.

Do not grease or oil the rack, pinion, or the gear.

The top rack must be in low position while changing the feet position.

Do not use the hoist as a working platform. Use a stepladder or a working platform to screw the

board onto the ceiling.

Do not obstruct the wheels while operating. It may cause the device to malfunction.

Do not put your hand through the steering wheel while the top rack is lowering. It may cause hand

or finger injuries.

Do not remove the hoist’s safety labels.

Do not modify the hoist.

Use the hoist on a firm and stable surface which can support the weight of the tool and

plasterboard.

Lock the 2-wheel brakes while lifting a board.

In order to avoid collision with the top rack during its descent, use the main brake to regulate the

speed. In case of a main brake default, release immediately the safety brake lever in order to stop

the descent right away.

Main Parts of Panel Lifter

Reference

Subassembly

Arm

Arm pipe

Top rack

Main body

Page 8 of 24

Reference

Subassembly

Integrated extension

Support base for power drill

Wooden platform

Side foot

Middle foot

Balance bar with wheels

13/4’’ screw

21/4’’ screw

25/8’’ screw

31/8’’ screw

Nut

Assembly Instructions

1. Attach the balance bar with wheels (10) to the main body (4) with the two 31/8" screws (14) and

nuts (15). Use a 1/2" flat wrench and a 1/4" hex wrench.

2. Attach the side (8) and middle feet (9) to the main body (4) with the six 21/4" screws (12) and

nuts (15). Use a 1/2" flat wrench and a 1/4" hex wrench.

Position the side feet with the brake (8) on the same side as the security and main brake levers. The

middle foot (9) is the shortest foot. The middle foot nuts have to be firmly tightened because the foot

doesn’t rotate like the side feet (8).

3. Open the 2 side feet (8) and insert the removable pin in the base frame hole following the

selected configuration :

Page 9 of 24

- HORIZONTAL CEILING SETTING AND SLOPING CEILING :

- VERTICAL SETTING :

Page 10 of 24

- STORAGE/MOVING POSITION :

The top rack (3) must be in low position while changing the feet position.

4. Insert the 3.28 Ft extension (5) in the frame and lock it in the selected hole with the removable

pin. The extension has 3 different height positions: 11.48 Ft –13.12 Ft and 14.76 Ft.

5. Insert the top rack (3) in the extension base and attach it with the 25/8" screw (13) and nut (15).

Inhaltsverzeichnis

Andere Bannon Baumaschinen Handbücher

Bannon

Bannon 57023 Bedienungsanleitung

Beliebte Baumaschinen Handbücher anderer Marken

SASFORKS

SASFORKS EXTREME Bedienungsanleitung

Hailo

Hailo H-50 Bedienungsanleitung

Graco

Graco LineLazer ES 1000 Gebrauchs- und Pflegehandbuch

Greenlee

Greenlee 555RSC Bedienungsanleitung

Manitowoc

Manitowoc Grove CD3340B Bedienungsanleitung

Lux Tools

Lux Tools A-FMR-20 Set Bedienungsanleitung

SIP

SIP 03683 Bedienungsanleitung

Volvo

Volvo L30G Bedienungsanleitung

Grizzly

Grizzly G8712 Bedienungsanleitung

Modulift

Modulift CMOD 12 Bedienungsanleitung

Case

Case DV201 Bedienungsanleitung

Sealey

Sealey SC10.V2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT05 Bedienungsanleitung

HYVA

HYVA AMCO VEBA 81 Series Bedienungsanleitung

Atlas Copco

Atlas Copco Dynapac V5100TV Bedienungsanleitung

Toro

Toro 323 Bedienungsanleitung

Manitowoc

Manitowoc National Crane 1400A Bedienungsanleitung

SGS

SGS EC1500 Bedienungsanleitung