Barco MDCG-5121 Bedienungsanleitung
Coronis 5MP
User Guide
MDCG-5121
B4100592/03
05/08/2014
Barco nv
President Kennedypark 35, 8500 Kortrijk, Belgium
Phone: +32 56.23.32.11
Fax: +32 56.26.22.62
Support: www.barco.com/esupport
Visit us at the web: www.barco.com
PrintedinBelgium
1. Welcome!
1. WELCOME!
1.1 About the product
Overview
The high-grade Coronis 5MP display system offers unsurpassed film-like images with ultra-high resolution,
luminance and contrast . The 21.3” LCD provides unequaled image quality without pixelization, a wide
viewing angle and perfect geometry.
Building on proven technology, Coronis 5MP provides ultimate precision and performance while main-
taining the highest brightness and contrast. The advanced 10-bit architecture ensures accurate image
representations with 1024 simultaneous shades of gray out of a palette of 4096.
CAUTION:Read all the important safety information before installing and operating your
Coronis 5MP. Please refer to the dedicated chapter in this user guide.
1.2 What’s in the box
Overview
Your Coronis 5MP comes with:
• the display
• a system tilt and swivel foot
• this Coronis 5MP user guide
• a system CD
• a DisplayPort cable
•aDVIcable
•anUSBcable
•anACpowercord
• an external power supply
If you ordered a Barco display controller, it’s also in the box together with its accessories. A dedicated
user guide is available on the system CD.
Keep your original packaging. It is designed for this display and is the ideal protection
during transport and storage.
B4100592 CORONIS 5MP 05/08/2014 1
1. Welcome!
2B4100592 CORONIS 5MP 05/08/2014
2. Parts, controls and connectors
2. PARTS, CONTROLS AND
CONNECTORS
2.1 Display front view
Overview
7
1 2 3 4 5 6
Image 2-1
Front view
1I-Luminate/Left key 2Right key
3Menu key 4Power on/off key
5Ambient light sensor 6Power LEDs
7Side downstream USB 2 & 3
B4100592 CORONIS 5MP 05/08/2014 3
2. Parts, controls and connectors
2.2 Display rear view
Connector compartment cover closed
12 3
4
Image 2-2
Rear view cover closed
1Connector compartment cover 2Display release button for portrait position
3Mounting anchor 4Display release button for landscape position
Connector compartment cover open
5
6
7
8
9
10
11
Image 2-3
Rear view cover open
524 Vdc power input 6+5 Vdc, 0.5 A power output
7Display Port video input 8DVI video input
9Ethernet connection (see note below) 10 USB upstream
11 USB downstream 1
4B4100592 CORONIS 5MP 05/08/2014
2. Parts, controls and connectors
The Ethernet connection is used for maintenance purposes and is not supported for
user application.
2.3 Foot
Single foot
1
2
Image 2-4
1Tilt & Swivel neck cover 2Cable duct covers
Dual foot
1
2
3
4
2
Image 2-5
Dual tilt and swivel foot
1Cable cover 2Left & right arm cover
3Foot lock clip (behind cable cover) 4Display positioning sliders
B4100592 CORONIS 5MP 05/08/2014 5
2. Parts, controls and connectors
6B4100592 CORONIS 5MP 05/08/2014
3. Display installation
3. DISPLAY INSTALLATION
Prior to installing your Coronis 5MP and connecting all necessary cables, make sure to
have a suitable display controller physically installed in your computer. If you are using
a Barco display controller, please consult the user guide delivered with it to do this.
3.1 Mounting the displays
WARNING:Do not change the display orientation by turning the panel when it is
mounted on its stand.
To change from landscape to portrait or the other way around, remove the panel from
its stand and use the appropriate mounting hooks as described above.
Using the single tilt & swivel foot (portrait orientation)
1. Unpack the single tilt & swivel foot and place it on a solid surface.
2. Unpack the display.
2
1
3
3. Hook the top gaps in the rear of the panel over the top anchors of the stand attachment plate (1).
4. Push the bottom of the panel firmly towards the stand so that the bottom anchors clip in the bottom
gaps (2).
5. Check that the panel is firmly attached to the stand.
6. Tilt and swivel the panel to the desired position and angle.
B4100592 CORONIS 5MP 05/08/2014 7
3. Display installation
Using the single tilt & swivel foot (landscape orientation)
1. Follow the same steps as for the portrait installation but hold the display in landscape position to hook
the panel on the foot.
1
2
3
To release the panel from the display foot:
1. Push the push-button (3) at the rear of the panel.
8B4100592 CORONIS 5MP 05/08/2014
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Barco Monitor Handbücher
Barco
Barco MDSC-1119-2124 Technisches Handbuch
Barco
Barco MDSC-2224 Montageanleitung
Barco
Barco MDRC-2124 Bedienungsanleitung
Barco
Barco MDSC-2232 Series Bedienungsanleitung
Barco
Barco MiSPHERE Bedienungsanleitung
Barco
Barco OverView OL510 Bedienungsanleitung
Barco
Barco OPScenter microVTS Bedienungsanleitung
Barco
Barco SLite 10 XP Handbuch
Barco
Barco RDDS Bedienungsanleitung
Barco
Barco MDRC-1219 HB Bedienungsanleitung
Barco
Barco ADP361 Bedienungsanleitung
Barco
Barco MDSC-8255 MNA Bedienungsanleitung
Barco
Barco Coronis Fusion 4MP Bedienungsanleitung
Barco
Barco MDRC-1119 TS Betriebsanleitung
Barco
Barco MFCD 3220 D Bedienungsanleitung
Barco
Barco X 1.2 Benutzerhandbuch
Barco
Barco MFCD 1218 Bedienungsanleitung
Barco
Barco R9850100 Bedienungsanleitung
Barco
Barco Coronis Fusion 4MP Bedienungsanleitung
Barco
Barco NX--4 Montageanleitung
