Barco F90 series Bedienungsanleitung

F90-series Quick Start Guide

Printed on FSC certied paper (www.fsc.org)

General

601-0383-01

LED status light

Adjustable feet.

Projector lens.

Lens holder.

IR receiver: For receiving remote control signals

LCD touchscreen panel.

Keypad: Used for local operations on the projector.

Connector panel: Control and communication interfaces for the projector.

Front USB and Triggerboard.

LED Status LightLED Status Light

Projector Main Components and interfaceProjector Main Components and interface

WARNING!

Class 1 Laser RG2 Product.

For North America, Class 3R up to TR 2.33

This Projector may become RG3.

Refer to user manual before operating

Do not stare into beam. This projector

has class 4 laser cluster. Do not attempt

to disassemble or modify this projector.

Red light indicates a failure.

Contact service representative.

F90-series Quick Start Guide

General

DMX: DMX512 Input

RS-232: 9- pin DB9 Connector

Sync: BNC Sync Port IN/OUT; Bidir mini-DIN

Trigger: 12VDC - 0,5A (6W)

DL-DVI-D: Dual DVI-I 1.0 (DVI_D Functionallity)

HDMI: Standard HDMI 2.0

HDBaseT: Standard RJ45 8P8C Connector

SDI: SDI connector with Barcolink Support

RC: XLR connector for wired remote

USB: Usb 2.0 type A, 4 pin

LAN: Standard RJ45 connector

DP: Standard Display port

123 4

9 8

KeypadKeypad

Control & communication connectionsControl & communication connections

LCD Screen. Displays the current projector status and source connections.

Navigation Panel. Navigation arrows (up, down, left, right). Conﬁrm selection. ()

Turn On Screen Display (OSD) menu ON / OFF.

Power On/Standby

Undo action / Back to previous screen

Deactivate the OSD. Only critical warnings will be displayed.

Select input source. Menu appear on OSD or in LCD display. Use Navigation Panel to select and conﬁrm

Open / Close lens shutter.

Activate test pattern. Menu appear on OSD or in LCD display. Use Navigation Panel to select and conﬁrm.

Activate Lens Function. Use navigation keys to manage and conﬁrm actions.

F90-series Quick Start Guide

110-240V

Connect power

Press Power On Button

Installation ConditionsInstallation Conditions

Ventilation RequirementsVentilation Requirements

General

Content is distorted or color is not correctContent is distorted or color is not correct

Power up procedure

Review source information in the Status menu (LCD

screen or OSD) and verify that the source signal is

compatible.

Check length of source cables; try shorter cables.

Use test images to verify that the correct aspect ratio is

selected.

Reset color and display settings to factory settings.

Restart the projector. Let the unit cool down for at least

1 minute prior to restarting.

Power down procedure

1000 mm

500 mm

Ambient operating conditions:

Altitude 0 - 500 m: Altitude 0 - 500m:

Temperature: 10 - 40°C Temperature: 40 - 45°C

Humidity: 10-80% RH Humidity: 10-65% RH

Altitude 500 - 1500 m:

Temperature: 10 - 40°C

Humidity: 10-80% RH

Power requirements: 110 - 240 V, 50 - 60 Hz

Dimensions excl. lens: 737 x 577 x 296 mm (WxLxH)

Weight excl. lens: 44,5 kg

Warm exhaust!

Do not place

heat-sensitive

objects in this area.

CAUTION!

Plug in mains power cord

Press the power button

Press Power Button for 3 seconds.

Remove main power cord from the projector

Failure Indications - what to do

110-240V

Pull out Connector

Press Power Button for 3 sec

ZOOM

FCS

FOCUS

FCS

SHUTTER

LENS SHIFT

RGB

OSD

LCD

PAT

PATTERN

INPUT

DEFAULT

DEFLT

ADDRESS

ADR MCR

BACK

MACRO

LASER

Light On/Off

Lens Shift

Shift lens position

Activate main menu

R1-R4

Not in use

Shutter OP + CL

Open + Close Mech. Shutter

Power

Toggle power.

Conﬁrm power off.

Input

Select input source

Address

Not in use

Remote Control

REMOTE CONTROL WARNING

Laser radiation class II product.

Wavelength 670nm; maximum output 1mW.

Remote control complies with applicable

requirements of 21 CFR 1040.10 and 1040.11.

Remote control complies with applicable

requirements of EN/IEC 60825-1/2007

Altitude 1500 - 3000 m:

Temperature: 10 - 35°C

Humidity: 10-80% RH

F90-series Quick Start Guide

Maintenance

Installing lens

Go to www.barco.com and select your product. All available

software and hardware downloads are ﬁled under the Technical

Downloads tab.

Download and unzip the ﬁrmware .zip ﬁle. Extract and save the

<version>.fw ﬁle to a USB stick with FAT-ﬁle system. Use the

eject function on your PC to safely remove the device.

Insert the USB stick into the projector’s USB port.

Follow instructions on the LCD display.

CAUTION !

Do NOT turn off, power down, or remove mains power supply

to the projector when an upgrade is in progress.

NOTE !

Once initiated, the upgrade procedure can take up to 20

minutes to complete.

Software upgradeSoftware upgrade

When handling lens in or out, always close shutter, see keypad explanation. Press Shutter keypad, and verify that the shutter keypad turn in to red

illumination. This indicate that the shutter is off. When lens is installed, open shutter by pressing the shutter key. Shutter open state is veriﬁed

when the shutter key illuminates white.

Verify that the lens release lever is in it’s default position, at the far left of the slide, as illustrated

Remove the protective cap at the lens bayonet end

Align the lens so that the red marking on the bayonet end is facing upwards, and towards the red marking on the top of the projector cabinet.

Install the lens bayonet into the lens mount, and then slide it to the right. Check that the lever is ﬁrmly at the far right end of the slide before

removing your hand from the lens..

Push the lens release lever in, and slide to the far left position

Pull the lens straight out of the lens mount.

NOTE!! To prevent damage to the lens, and dust contamination in the projector light processor, always replace the lens bayonet cap, lens front cap

and projector lens cap immediately after removing the lens.

Lens Removal

When removing the lens, always close the shutter, see keypad explanation. Press Shutter

keypad, and verify that the shutter keypad turn in to red illumintation. This indicate that

the shutter is off. When lens is installed, open shutter by pressing the shutter key. Shutter

open state is veriﬁed when the shutter key illuminates white.

Andere Handbücher für F90 series

Inhaltsverzeichnis

Andere Barco Projektor Handbücher

Barco

Barco fD70-DL Bedienungsanleitung

Barco

Barco CV series Bedienungsanleitung

Barco

Barco F10 AS3D Bedienungsanleitung

Barco

Barco CineVERSUM 110 Merkblatt

Barco

Barco R5975039 Bedienungsanleitung

Barco

Barco R9040380 Bedienungsanleitung

Barco

Barco FLM series Benutzerhandbuch

Barco

Barco VISION 3200LC Bedienungsanleitung

Barco

Barco BarcoReality SIM6 Ultra R9040150 Bedienungsanleitung

Barco

Barco HDX 4K Bedienungsanleitung

Barco

Barco SLM R12 Plus Bedienungsanleitung

Barco

Barco HDF W series Bedienungsanleitung

Barco

Barco Prometheus III Bedienungsanleitung

Barco

Barco FS33 IR WUXGA Bedienungsanleitung

Barco

Barco BARCODATA 2100 Bedienungsanleitung

Barco

Barco BarcoData 1209S Bedienungsanleitung

Barco

Barco HDX--W14 Bedienungsanleitung

Barco

Barco SIM 5R Bedienungsanleitung

Barco

Barco BARCOREALITY 8200TCR+ Bedienungsanleitung

Barco

Barco RLM-W12 Bedienungsanleitung

Barco

Barco REALITY 8200 TCR+ Bedienungsanleitung

Barco

Barco iD H250 Bedienungsanleitung

Barco

Barco Galaxy NH-12 Bedienungsanleitung

Barco

Barco OV-D2 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung