Bayby BBM 7001 Bedienungsanleitung

EN / Digital Audio Baby Monitor ■User's manual

BBM 7001

Digital Audio Baby Monitor

Table of Contents

Introduction .....................................................................3

Safety instructions and important notes ................................................3

Description of the accessories .......................................................6

Description of the baby unit .........................................................7

Description of the parent unit ........................................................7

Installation location of the baby unit and parent unit .......................................8

Power source ....................................................................8

Using the baby monitor ............................................................9

General information about using the baby monitor .......................................10

Troubleshooting .................................................................10

Cleaning and maintenance .........................................................10

Technical speciﬁcations ...........................................................11

Explanation of symbols used on the product, its accessories and packaging ...................11

Instructions and information about the handling of used packaging ..........................12

Digital Audio Baby Monitor EN

Introduction

■Thank you for selecting the Bayby BBM7001 Digital Audio Baby Monitor. This digital baby monitor

is agreat child care accessory that enables you to hear your baby when you are not in the same

room. Nevertheless, it is important to understand that it cannot serve as asubstitute for responsible

adult supervision.

■The sound detected by the baby unit is transmitted to the parent unit. FHSS digital wireless technology

is utilised for transmitting the audio signal. This guarantees very high quality audio transmission up

to arange of 300metres.

■The encrypted wireless transmission and automatic available channel selection features guarantee

privacy and the peace of mind that you will hear only your child.

■The baby monitor features aVOX function that enables avoice activated transmission mode. The

baby monitor will thus always start transmitting when it detects any voice or noise. When no sound

is being transmitted, the baby monitor will automatically switch to the ECO mode. This reduces the

transmission power to ensure power efﬁcient operation.

■You will be informed about an exceeded signal range, loss of signal or interference by means of an

acoustic alarm and the respective LED indicator light.

■Volume is adjustable. Furthermore, the parent unit is also equipped with an LED noise level indicator.

■Both units have alow battery level indicator.

■The parent unit and the baby unit are powered using the supplied power adapters or AAA batteries

(3x1.5V for each unit).

Safety instructions and important notes

■Before ﬁrst use, thoroughly read the user'smanual. Keep this

user'smanual for future use.

■This baby monitor meets all relevant standards and its use is safe

when all the instructions contained in this manual are followed.

■The baby monitor serves to monitor your child when you are not

in the same room and cannot supervise it directly. Nevertheless,

it is important to keep in mind that your child'ssafety comes ﬁrst

and therefore this baby monitor cannot serve as asubstitute for

supervision by aresponsible adult.

■This baby monitor is intended for home (private) use only. It is not

intended for commercial purposes.

■After unpacking the baby monitor and its accessories from the

packaging material, place the plastic bags in asafe location out

of children'sreach. In the presence of children, plastic bags may

present asuffocation hazard.

■Only use the baby monitor with the original adapters that came

with it.

Digital Audio Baby Monitor

■Never use the baby monitor with accessories that are not ap-

proved by the manufacturer.

■Before connecting the power adapter to apower socket, make

sure the voltage stated on its rating label corresponds to the volt-

age in the power socket. Position the power cord of the power

adapter so that it will not be tripped over.

■The baby monitor may only be operated by adults.

■Children must not play with the baby monitor. Keep the baby

monitor, power adapters and batteries out of children'sreach.

■Before ﬁrst using the baby monitor, acquaint yourself with its

functions and before every use, make sure that both the baby

and parent unit are in working order.

■Ensure that the baby monitor and the power adapter do not come

into contact with hot surfaces or sharp objects.

■Do not place the baby monitor in the vicinity of water containers

or appliances that are sources of heat.

■Do not cover the baby monitor and do not place any items on it.

■Do not use the baby monitor in an excessively dusty or humid

environment. Do not subject it to extreme temperature changes

and electromagnetic ﬁelds.

■Do not submerge the baby monitor and its accessories in water

or rinse it under running water.

■Always disconnect the baby monitor from the power socket when

not using it and before cleaning it.

■For powering both of the units from an internal power source, only

use type AAA batteries (3×1.5Vper each unit). Attention - the

baby monitor is not to be used as abattery charger.

■Do not disconnect the power adapter from the power socket by

pulling on the power cord. This could damage the power adapter

or the power socket. Disconnect the power adapter from the

power socket by pulling on the plug.

Digital Audio Baby Monitor EN

■When not using the baby monitor for an extended period of time,

remove the batteries from both the units.

■Keep the batteries out of children'sreach as they may present

ahazard to achild. In the event that achild swallows abattery,

immediately seek medical help.

■Do not attempt to short circuit or break the battery or throw it into

aﬁre. Do subject the battery to direct sunlight, ﬁre, etc.

■Do not make any alterations to the baby monitor that would

change its electrical or mechanical properties.

■The baby monitor must not be operated with auxiliary ampliﬁers

of high-frequency power or directional antennas.

■Do not use the baby monitor if it is in any way damaged or if the

power adapter is damaged.

■Do not attempt to repair the baby monitor yourself. Have all re-

pairs or adjustments performed at an authorised service centre.

■By tampering with the product you risk voiding your legal rights

arising from unsatisfactory performance or quality warranty.

■We recommend saving the original box, packaging material,

receipt and responsibility statement of the vendor or warranty

card for the duration of warranty. It is appropriate to transport

the baby monitor in its original box.

Digital Audio Baby Monitor

Description of the accessories

1Baby unit

2Parent unit

3Power adapter (2 pcs)

4Power cord (2 pcs)

The adapters are identical.

Digital Audio Baby Monitor EN

Description of the baby unit

1Antenna

2Power and low battery level indicator

3Microphone

4Volume control dial

5On/Off/Pair switch

6Belt clip

7Hanging notch

8Battery compartment

9Power adapter socket (not shown) that is

located on the side of the baby unit

Description of the parent unit

1Antenna

2LED volume indicator

3Power and low battery level indicator

4Speaker

5Volume control dial

6On/Off/Pair switch

7Belt clip

8Hanging notch

9Battery compartment

0Power adapter socket (not shown) that is

located on the side of the baby unit

Digital Audio Baby Monitor

Installation location of the baby unit and parent unit

1. Baby unit

■Locate the baby unit A1within reach of apower socket on an even, dry and stable surface in the room

where you want to monitor your child. We recommend an elevated location (e.g. chest of drawers or

ashelf) at asufﬁcient distance away from equipment and devices that could cause signal interference.

■The baby unit A1should be located at least 1m away from your child to minimise the effects of

electro-smog.

Never locate the baby unit A1or the power adapter A3, A4in the baby'sbed or within your

child'sreach.

2. Parent unit

■Put the parent unit A2in the room where you will be located. When the parent unit A2is to be

powered from the grid, locate it within reach of apower socket.

Power source

1. Baby unit

■External power source and its use

– For powering the baby unit A1, use only the original power adapter A3model number

RY050100EU-B including the power cord A4.

– Insert the plug of the power cord A4into the socket B9that is located on the side of the baby

unit A1. Insert the plug of the power adapter A3into apower socket.

2. Parent unit

■External power source and its use

– For powering the parent unit A2, use only the original power adapter A3model number

RY050100EU-B including the power cord A4.

– Insert the plug of the power cord A4into the socket C0that is located on the side of the

parent unit A2. Insert the plug of the power adapter A3into apower socket.

Info:

The supplied power adapters A3and cords A4are identical and interchangeable between both

units. Both units A1, A2may also be powered via the A4cord from an external USB interface

(e.g. computer, powerbank, etc.). In this case, always check that there are no batteries inserted in

the units A1, A2.

Attention:

Before connecting the power adapter A3to apower socket, make sure the voltage stated on its

rating label corresponds to the voltage in the power socket.

Digital Audio Baby Monitor EN

3. Internal power source and its use

– Battery operation minimises electro-smog which arises due to the effect of alternating electric

and magnetic ﬁelds.

Note:

– In the event that you are planning not to use the baby monitor for an extended period of time,

take the batteries out of the units A1and A2and store them out of children'sreach.

– For powering the baby unit and the parent unit from an internal power source, use standard

single-use AAA batteries (3x1.5V1.5Vper each unit).

– The baby monitor is not abattery charger.

– From the rear side of the baby unit and the parent unit A1andA2, release the bottom parts

of the belt clips B6aC7by pulling downwards. Open the battery compartment cover B8

andC9by pulling. Insert 3xAAA batteries into the battery compartment B8, C9. When

inserting the batteries, make sure that you maintain the correct polarity, which is marked in the

battery compartment B8, C9. Close the battery cover B8, C9. Attach the belt clip B6

andC7to its initial position by pulling the side part upwards.

If you decide to power the units A1or A2using power adapters and batteries are still inserted

inside, then ﬁrst remove these batteries from both units.

Using the baby monitor

1. Turning the baby unit and the parent unit on and off

■Turn on the baby unit and the parent unit A1, A2by setting the switch B5, C6to the "ON" posi-

tion and the indicator light B2,C3will be lit green.

■Turn off the baby unit and the parent unit A1, A2by setting the switch B5, C6to the "OFF"

position and the indicator light B2,C3will turn off.

■When you have ﬁnished using the baby unit and the parent unit A1, A2, always turn it off and

disconnect the power adapter A3from the power socket.

2. Pairing the units

The baby unit A1is paired with the parent unit A2in advance. Under normal circumstances, it is

not necessary to pair the units. However, in the event that the connection is lost, then it is necessary

to pair the units again in order for the baby monitor to function. Set switch B5, C6to the "PAIR" po-

sition. Power indicators B2, C3will ﬂash, and the pairing process is ﬁnished when abeep is made.

3. Volume setting

The volume of both units can be adjusted by turning the volume control dials B4, C5up and down.

The sound detected by the baby unit A1is transmitted to the parent unit A2. LED indicator lights

C2will inform you about audio transmission. This will be particularly useful when the parent unit

A2is set to alow volume.

4. Low battery power indicator

The low battery power indicator B2, C3will start ﬂashing rapidly when battery capacity falls below

acertain level. The unit will shut off when the battery capacity falls below 3.0V.

Digital Audio Baby Monitor

5. Notiﬁcation that the unit is outside the signal range (only on the parent unit).

In the event that the units are outside the communications range or one of the units has alow bat-

tery power level or is turned off, the parent unit will start beeping and the volume indicator C2will

simultaneously start to ﬂash.

General information about using the baby monitor

■Before using the baby monitor for monitoring your child, always check that both the baby and parent

unit A1andA2are in working order, that there is aconnection between the units and that audio

is being transmitted. The connection between the units is indicated by the Connection/On LED

indicator light B2, C3.

■To increase the signal range, place the baby unit A1in an elevated location as close as possible to

the door or window.

■Other radio waves may interfere with the signal transmission. For this reason, do not place the baby

monitor in the vicinity of appliances such as e.g. amicrowave oven or WLAN devices, etc.

■The following factors may interfere with the signal or reduce its range:

– one of the units is covered,

– obstacles in the signal transmission direction such as furniture, walls, trees, etc.

– weather events such as fog, rain, etc.

Troubleshooting

■No connection

– The unit or both units are turned off. Check that the switch B5, C6is in the "ON" position.

– Check whether the batteries are inserted, e.g. if the unit or both the units are powered from

the mains.

– The batteries may have alow capacity, replace them.

■Sound is not being transmitted.

– Check that you do not have the sound on the baby unit set too low or turned off. Increase the

volume by turning the volume dial B4on the baby unit to ahigher level.

– Check that you do not have the sound on the parent unit set too low or turned off. Increase the

volume by turning the volume dial C5on the parent unit to ahigher level.

– The units are outside the signal range or have lost their connection. Try bringing the units closer

together or pairing them if necessary. Remove any obstacles preventing signal transmission

such as microwave ovens, furniture, etc.

■Signal interference

– The units are located too close to each other. Keep the units at least 1metre apart.

– The volume control dial on the parent unit is set too high. Turn down the volume on the parent

unit.

– Check the polarity of the batteries or replace them.

Cleaning and maintenance

■Before cleaning the baby monitor, disconnect it from the power socket.

■To clean the parent unit and the baby unit and the power adapters, use aclean, dry cloth.

■For cleaning, do not use abrasive cleaning products, solvents, thinners, etc. Never submerge the

baby monitor or its power adapters in water or rinse under running water.

Inhaltsverzeichnis

Andere Bayby Babyphone Handbücher

Bayby

Bayby BBM 7010 Bedienungsanleitung

Bayby

Bayby BBM 7011 Bedienungsanleitung

Bayby

Bayby BBM 7005 Bedienungsanleitung

Bayby

Bayby BBM 7000 Bedienungsanleitung

Bayby

Bayby BBM 7030 Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Philips

Philips SCD 469 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

Philips

Philips AVENT SCD841 Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Philips

Philips SBC SC364 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Summer

Summer Day & Night 28470A Bedienungsanleitung