Bayside MEGARA Bedienungsanleitung
v 1 . 0 ( 0 3 / 2 0 2 0 )
MEGARA
CEILING FAN
WITH IR REMOTE
INSTALLATION
OPERATION
MAINTENANCE
WARRANTY INFORMATION
CAUTION
READ INSTRUCTIONS CAREFULLY FOR SAFE
INSTALLATION AND FAN OPERATION.
Bayside Megara Fan Installation Instructions
2 | P a g e v 1 . 0 ( 0 3 / 2 0 2 0 )
THANK YOU FOR PURCHASING
Thank you for purchasing this quality product. To ensure correct function and safety, please read and
follow all instructions carefully before assembly, installation and use of this ceiling fan. Please keep all
instructions for future reference.
SAFETY PRECAUTIONS
1. This appliance can be used by children aged 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervisions.
2. Children should be supervised to ensure that they do not play with the appliance.
3. An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local
wiring rules.
4. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact your local government for information regarding the collection systems available. If
electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the
ground water and get into the food chain, damaging your health and well-being.
5. The structure to which the fan is to be mounted must be capable of supporting a weight of 30kg.
6. The fan is to be installed so that the blades are more than 2.3 m above the floor.
7. Must be assembled and installed by a licensed electrician.
8. WARNING: If unusual wobbling or oscillating movement is observed, immediately stop using the
ceiling fan and contact the manufacturer, its service agent or suitably qualified persons.
9. The replacement of parts of the safety suspension system device shall be performed by the
manufacturer, its service agent or suitably qualified persons.
10. The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a
sufficient strength to withstand 4 times the weight of the ceiling fan; that the mounting of the
suspension system shall be performed by the manufacturer, its service agent or suitably qualified
persons.
Bayside Megara Fan Installation Instructions
3 | P a g e v 1 . 0 ( 0 3 / 2 0 2 0 )
BEFORE INSTALLATION
Unpack the fan and carefully identify the parts. Please refer to Fig 1.
Lay out all the components on a smooth surface and make sure there are no components missing
before assembling. If parts are missing, return the complete product to the place of purchase for
inspection or replacement.
Check whether the ceiling fan has been damaged during transport. Do not operate/install any product
which appears damaged in any way. Return the complete product to the place of purchase for
inspection, repair or replacement.
1
Mounting bracket x 1
2
Fan assembly with canopy, Receiver, down rod, motor and light kit x 1
3
Blade x 3
4
Lamp shade x 1
5
Screw for mounting bracket x 2
6
Motor screw for blade x 6 (and 1 spare)
7
Balancing kit x 1 set
8
Remote control x 1 set
Fig. 1
Bayside Megara Fan Installation Instructions
4 | P a g e v 1 . 0 ( 0 3 / 2 0 2 0 )
INSTALLING THE MOUNTING BRACKET
The ceiling fan must be installed in a location so that the blades are a minimum 300mm spacing from
the tip of the blade to the nearest objects or walls.
Install the mounting bracket to the ceiling joist or structure that is capable of carrying a load of at least
30kg, with the two long screws provided. Ensure at least 30mm of the screw is threaded into the
support. (Fig. 2)
NOTE: The bracket screws provided are for use with wooden structures only. For structures
other than wood, the appropriate screw type MUST be used. Ensure the screws used are
suitable for the mounting surface and the surrounding environment.
ANGLED CEILING INSTALLATION (Fig. 3)
This fan hanging system supports a maximum
18 degree angled ceiling installation.
HANGING THE FAN
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned
on the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.4)
Fig. 2
Fig. 3
Fig. 4
Bayside Megara Fan Installation Instructions
5 | P a g e v 1 . 0 ( 0 3 / 2 0 2 0 )
INSTALLING THE FAN
BLADE ATTACHMENT (Fig. 5)
1. Before Installing the blades, remove the blade screws from the top of the fan motor.
2. Align the 2 holes on the blade with the 2 holes on the fan motor assembly and using the 2 blade
screws in step 1, to secure the fan motor assembly.
3. Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing. Take care
not to over tighten the screws, as this can damage the blades.
4. Once completed, repeat the process on the remaining blades.
LIGHT KIT INSTALLATION (FOR FAN WITH LIGHT) (Fig. 6)
1. Install the bulbs (1, Not included, Max. 15W LED only, E14) into the lamp holders (2).
2. Lift and attach the glass (3) to the base (4) and secure it by turning it clockwise.
Fig. 5
Fig. 6
Bayside Megara Fan Installation Instructions
6 | P a g e v 1 . 0 ( 0 3 / 2 0 2 0 )
ELECTRICAL WIRING DIAGRAM
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A
LICENSED ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED
WIRING.
Connect “LIVE” supply wire to the “L” of terminal block on the mounting bracket.
Connect “NEUTRAL” supply wire to the “N” of terminal block on the mounting bracket.
Connect “EARTH” wire to the “ ” of terminal block on the mouthing bracket.
Insert the receiver into the mounting bracket and onto the ball joint.
Connect the output connector (1) from the receiver to the connector (1) from the fan body.
Connect the connector (2) from the fan mounting bracket to the input connector (2) from the receiver.
Fig. 7
Bayside Megara Fan Installation Instructions
7 | P a g e v 1 . 0 ( 0 3 / 2 0 2 0 )
FINISHING THE INSTALLATION
Ensure the earth wiring is secure and correct, by performing an earthing continuity test from the fan’s
accessible metal body back to the earth terminal at the terminal block on the mounting bracket.
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy
and that the wires are not damaged during this step. Secure the canopy to the mounting bracket
using the screws provided. (Fig. 8)
Switch ON mains power supply to the fan. Test the fan operations or enjoy using the fan following
instructions the under “USING YOUR CEILING FAN” section of this instruction manual.
USING YOUR CEILING FAN
REMOTE CONTROL (Fig. 9)
Your ceiling fan is controlled by the remote control. Before operating the remote, the following must be
considered.
- 1x CR2032 3V battery is required to operate the remote control.
- Remove the screw (6) and pull out the battery tray (2) by pressing the clip (1) and pulling out the
battery tray together.
- Place the battery (3) on the tray and insert the tray back into remote handset (4) indicated by “+”
polarity symbol (5).
- Ensure the polarity is correct as shown in the battery compartment.
- Reinstall the screw (6) to secure the battery tray (2).
Fig. 8
Fig. 9
Bayside Megara Fan Installation Instructions
8 | P a g e v 1 . 0 ( 0 3 / 2 0 2 0 )
OPERATING THE REMOTE:
Before you start using the remote, take the time to read through this section and get familiar with the
buttons and function of each button (Fig. 10).
1. IR TRANSMITTER
2. HI button: Press the button to set fan running at High speed.
3. MED button: Press the button to set fan running at Medium speed.
4. LOW button: Press the button to set fan running at Low speed.
5. OFF button: Press the button to turn OFF the fan.
6 / 7 / 8. 1Hr / 3Hr / 6Hr fan timer button:
Press the button to activate the fan timer function, the fan will turn off
after running 1 hour / 3 hours / 6 hours.
11. LIGHT button: Press the button to turn ON/ OFF the light.
The remote has memory function. If the fan or light is turned off by the isolating switch, it will memorise
and recover the last status when turned on next.
EFFECTIVE DISTANCE/LOCATION FOR IR REMOTE CONTROL (FIG. 11)
Left from center-line: Approximately 45 degrees
Right from center-line: Approximately 45 degrees
Distance from remote control to receiver: 3 meters max.
Fig. 10
Fig. 11
Bayside Megara Fan Installation Instructions
9 | P a g e v 1 . 0 ( 0 3 / 2 0 2 0 )
REVERSE FUNCTION
Your ceiling fan can operate in either summer or winter mode.
SUMMER Mode: The reverse switch should be in the SUMMER position to rotate the fan in an
anticlockwise direction. The airflow will be directed downwards, for cooling in summer.
WINTER Mode: The reverse switch should be in the WINTER position to rotate the fan in a clockwise
direction. The airflow will be directed upwards assisting in the circulation of warm air, for energy
conservation in winter.
AFTER INSTALLATION
WOBBLE:
NOTE: ceiling fans tend to move during operation due to the fact that they are mounted on a rubber
grommet. If the fan was mounted rigidly to the ceiling it would cause excessive vibration. Movement of a
few centimetres is quite acceptable and DOES NOT suggest any problem.
TO REDUCE THE FAN WOBBLE: Please check that all screws which fix the mounting bracket and down
rod are secure.
BALANCING KIT: A balancing kit is provided to balance the ceiling fan on initial installation. Please refer
to the instruction on how to use the balancing kit. The balancing kit can be used to assist re-balancing
should the ceiling fan become un-balanced again. Store your balancing kit away after installation for
future use if required.
NOISE:
When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and
frequency signals superimposed in the electricity for off-peak hot water control, may cause a change in
fan motor noise. This is normal. Please allow a 24-hour “breaking-in” period, most noises associated with
a new fan disappear during this time. Please note that this is not a product fault and as such is not covered
under warranty – All electric motors are audible to some extent.
Fig. 12
Bayside Megara Fan Installation Instructions
10 | P a g e v 1 . 0 ( 0 3 / 2 0 2 0 )
CARE & CLEANING
NOTE: Always turn OFF the power at the mains switch before performing any maintenance or
attempting to clean your fan.
Every 6 months periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush
or lint free cloth to avoid scratching the paint finish. Please turn off electricity power when you do so.
Do not soak or immerse your ceiling fan in the water or other liquids. It could damage the motor or the
blades and create the possibility of an electrical shock.
Ensure that the fan does not come in contact with any organic solvents or cleaners.
To clean the fan blade, wipe with only a damp clean cloth with NO organic solvents or cleaners.
The motor has a permanently lubricated ball bearing so there is no need to oil.
SAFETY PRECAUTIONS FOR BATTERY
- To prevent false operation during battery insertion or replacement, this ceiling fan must be
disconnected from the supply mains.
- Remove battery must be from the remote transmitter before it is discarded.
- Always use Lithium CR2032 battery type with this ceiling fan remote controller.
- Dispose of exhausted batteries immediately and safely (so they cannot be retrieved by children). Flat
batteries can still be dangerous. Contact your local council to safely dispose of the battery.
- Ensure the batteries are inserted with the correct polarity.
- Do not use rechargeable batteries in this product.
- CAUTION – Do not ingest battery—Chemical burn hazard.
- WARNING – Keep new and used batteries away from children.
- Regularly check the product and make sure the battery box lid is correctly secured. If the battery
compartment does not close securely, stop using the product and keep it away from children.
- Remove batteries from the product when not in use for long periods of time.
- If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
- If you suspect your child has swallowed or inserted a button battery, call the emergency number of
your country if you are in Europe for fast, expert advice.
- Battery Leaks: Battery contains chemicals and should be treated as any chemical would. Take
precautions when handling leaked battery chemicals. Battery chemicals should not be placed near
the eyes or ingested, call the emergency number of your country if you are in Europe for fast, expert
advice.
Inhaltsverzeichnis
Sprachen:
Andere Bayside Lüfter Handbücher
Bayside
Bayside LAGOON Bedienungsanleitung
Bayside
Bayside CALYPSO Installationsanleitung
Bayside
Bayside LAGOON CTC Installationsanleitung
Bayside
Bayside CALYPSO Installationsanleitung
Bayside
Bayside LAGOON Bedienungsanleitung
Bayside
Bayside NAUTILUS Betriebsanleitung
Bayside
Bayside LAGOON Bedienungsanleitung
Bayside
Bayside NAUTILUS Installationsanleitung
