Becom Argos3D-P23X Bedienungsanleitung

Argos3D-P23X

Quick Start Guide

Version 2

Quick Start Guide - Argos3D-P23X

Last change: 30 January 2019/Version 2

2| 15

BECOM Systems GmbH

Gutheil-Schoder-Gasse 17

1230 Wien

AUSTRIA

office.systems@becom-group.com

http://systems.becom-group.com

Argos3D-P23X –Quick Start Guide

Document No.: 900-308 / A

Publication date: January 30, 2019

Subject to change without notice. Errors excepted.

for any purpose in any form or by any means, electronically or mechanically, without expressly written permission by

BECOM Systems.

Windows is a registered trademark of Microsoft.

Quick Start Guide - Argos3D-P23X

Last change: 30 January 2019/Version 2

3| 15

Table of Contents

1Unboxing......................................................................................................................................................................................................................................5

1.1 In the box...............................................................................................................................................................................................................................5

1.2 Connecting your Argos3D–P23x ..................................................................................................................................................................5

1.3 Connector Overview..............................................................................................................................................................................................5

1.3.1 Connecting the break-out board ..........................................................................................................................................................6

1.3.2 Connecting the power supply.................................................................................................................................................................6

1.3.3 Connecting the Ethernet Cable.............................................................................................................................................................. 7

2Downloading the Evaluation Software .............................................................................................................................................................8

2.1 Support website........................................................................................................................................................................................................8

2.2 Start-up screen ...........................................................................................................................................................................................................9

2.3 Prepare your Network Interface Card (NIC) ....................................................................................................................................10

3Start using your Argos3D–P23x with ‘BltTofSuite’ ..................................................................................................................................11

4System Requirements & Support.........................................................................................................................................................................12

4.1 Support............................................................................................................................................................................................................................12

5Product History .................................................................................................................................................................................................................... 13

5.1 Argos3D-P230 ............................................................................................................................................................................................................ 13

5.1.1 Version Information........................................................................................................................................................................................ 13

5.1.2 Anomalies................................................................................................................................................................................................................ 13

6Document Revision History .......................................................................................................................................................................................14

AList of Figures and Tables ............................................................................................................................................................................................15

Quick Start Guide - Argos3D-P23X

Last change: 30 January 2019/Version 2

4| 15

The information herein is given to describe certain components and shall not be considered as a guarantee of

characteristics.

Terms of delivery and rights of technical change reserved.

We hereby disclaim any warranties, including but not limited to warranties of non-infringement, regarding circuits,

descriptions and charts stated herein.

BECOM Systems makes and you receive no warranties or conditions, express, implied, statutory or in any communication

with you. BECOM Systems specifically disclaims any implied warranty of merchantability or fitness for a particular purpose.

BECOM Systems takes no liability for any damages and errors causing of the usage of this board. The user of this board is

responsible by himself for the functionality of his application. He is allowed to use the board only if he has the

qualification. More information is found in the General Terms and Conditions (AGB).

Information

For further information on technology, delivery terms and conditions and prices please contact BECOM Systems

www.becom-group.com

Warning

Due to technical requirements components may contain dangerous substances.

5| 15

Quick Start Guide - Argos3D-P23X

Last change: 30 January 2019/Version 2

1Unboxing

1.1 In the box

•Argos3D–P23x

•CAT5/7 Ethernet Cable

•Interface Breakout-Board

•Quick Start Guide

•Power Supply

Note

The power supply’s operating temperature is specified from 0 to +40°C. This represents not

the effective working temperature of the Argos3D–P23x sensor!

1.2 Connecting your Argos3D–P23x

1.3 Connector Overview

The Argos3D-P23x uses one common connector for power and interfaces. For test purposes the KIT contains a

breakout-board to have individual access to the interfaces of the Argos3D-P23x.

The break-outboard has three main interfaces:

a. Power Connector

b. Ethernet

c. Argos3D-P23x common connector

Figure 1-1: Argos3D–P23x break-out board front and rear view

6| 15

Quick Start Guide - Argos3D-P23X

Last change: 30 January 2019/Version 2

Note

Please follow the next steps in the right order to get your ‘Argos3D-P23x’ up and running

correctly.

1.3.1 Connecting the break-out board

Please connect the break-out board to the Argos3D-P23x common connector first.

Figure 1-2: Argos3D–P23x common connector

1.3.2 Connecting the power supply

To ensure, that your Argos3D–P23x works correctly, connect the ‘Argos3D’ to a 12-30V DC power supply using

connector (a) and wait for approximately 20 seconds until the camera boots up.

Pin assignment on the power connector (a): Pin #1: +12V to +30V, Pin#2: GND

Note

The power supply connector is protected against wrong polarity but the ‘Argos3D’ will not

work in case you don’t use the correct polarity! If the Argos3D–P23x doesn’t work please

check the power supply polarity first!

7| 15

Quick Start Guide - Argos3D-P23X

Last change: 30 January 2019/Version 2

1.3.3 Connecting the Ethernet Cable

Plug in the Ethernet cable (b) and connect your Argos3D–P23x to your PC.^

Figure 1-3: Argos3D–P23x connected to power and Ethernet

8| 15

Quick Start Guide - Argos3D-P23X

Last change: 30 January 2019/Version 2

2Downloading the Evaluation Software

Please log in to our support website at https://support.bluetechnix.com/ and download the Argos-P23x customer

software package. This package also includes the Bluetechnix ToF-Suite.

2.1 Support website

Select ‚free access‘

Figure 2-1: Download Evaluation Package

9| 15

Quick Start Guide - Argos3D-P23X

Last change: 30 January 2019/Version 2

2.2 Start-up screen

Figure 2-2: Start-up screen

Please select your product Argos3D-P23x.

Please follow the instructions on the website.

10 | 15

Quick Start Guide - Argos3D-P23X

Last change: 30 January 2019/Version 2

2.3 Prepare your Network Interface Card (NIC)

Once you have connected your Argos3D–P23x to a Network Interface Card (NIC) of your PC give this NIC the IP-

Address 192.168.0.1 with a subnet mask of 255.255.255.0.

No driver must be installed on your PC!

The Argos3D–P23x uses IP-Address 192.168.0.10 with subnet mask 255.255.255.0.

Inhaltsverzeichnis

Andere Becom 3D-Kamera Handbücher

Becom

Becom Argos3D-Pulse Gebrauchsanweisung

Becom

Becom Argos3D-P33 Series Gebrauchsanweisung

Beliebte 3D-Kamera Handbücher anderer Marken

ESPROS

ESPROS TOFcam-635 Bedienungsanleitung

PMD

PMD flexx2 wide Bedienungsanleitung

KANDA

KANDA Obsidian GO Bedienungsanleitung

TeraBee

TeraBee 3Dcam 80x60 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Vision Installationshandbuch

IFM

IFM O3R222 Bedienungsanleitung

iRAYPLE

iRAYPLE 5000 Series Bedienungsanleitung

ORBBEC

ORBBEC Astra 2 Bedienungsanleitung

meerecompany

meerecompany Cube Eye RS5 Series Bedienungsanleitung

Lucid

Lucid Helios Flex Bedienungsanleitung

SICK

SICK Ranger E Bedienungsanleitung

ESPROS

ESPROS TOFcam-660 Bedienungsanleitung

KANDA

KANDA Obsidian S Bedienungsanleitung

TeraBee

TeraBee TB-3DCAM-8060-USB Bedienungsanleitung

SICK

SICK Ranger3 Bedienungsanleitung

Radio Engineering Industries

Radio Engineering Industries SV-360HD Bedienerhandbuch

Intel

Intel RealSense D400 Series Bedienungsanleitung

Reality Technologies

Reality Technologies Madshot Stücklistenhandbuch