BEGA 77 910 Handbuch

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung

LIGMAN

LIGMAN DE-20023 Bedienungsanleitung

Spectroline

Spectroline MAXIMA ML-3500 Series Bedienungsanleitung

Installation and Technical Information

BEGA

Replacement Parts

Accessories

Please refer to the appropriate

accessory installation sheet for

further instruction when applicable.

BEGA 1000 Bega Way, Carpinteria, CA 93013 (805)684-0533 Fax (805)566-9474 www.bega-us.com © Copyright BEGA-US 2017

In the interest of product improvement, BEGA reserves the right to make technical changes without notice.

Pole-top with asymmetrical wide-spread distribution 77 910

Tools Required:

3mm hex key

4mm hex key

5mm hex key

Adjustable wrench

Protection Class: IP65

Weight: 22.0 lbs.

Dimensions

A: 19-3/4”

B: 40-5/8 ”

C: 32-5/8 ”

Notice to Installer for 77 910:

1. For pole top applications only.

2. Slip ts 3” O.D. poles only.

3. LED module and integral driver provided by BEGA.

4. Pole top luminaire supplied with 25 feet of cable to route through pole.

77 910 - installation:

1. Route the luminaire wiring through to the pole base and slip luminaire over the

top of the pole.

2. Secure luminaire by tightening set screws on pole tter, evenly.

3. Insert shade reector into luminaire housing such that the drainage hole on the

reector rim is turned to the pole side. Tighten four (4) hex screws evenly and

securely.

4. Undo cap nut in luminaire housing and install optical unit according to directional

label, “FRONT”. Tighten nuts to secure.

5. Install lens after and tighten screw to secure. Make sure the gasket is seated

properly.

6. Make supply wiring connections to luminaire wires in pole base:

MAIN VOLTAGE SUPPLY WIRE TO BLACK LUMINAIRE WIRE

NEUTRAL (COMMON) SUPPLY WIRE TO WHITE LUMINAIRE WIRE

GREEN GROUND WIRE TO GREEN LUMINAIRE WIRE

Relamping/Maintenance

NO relamping necessary.

Lamp: 15.8W LED

77 910

8/8/2017

Page 1 of 2

Description

Acrylic lens cylinder

Lens gasket

LED driver

LED module (3000K)

LED module (4000K)

Part No

150366

830439

75983-02

LED-0276/830

LED-0276/840

Installation and Technical Information

BEGA

BEGA 1000 Bega Way, Carpinteria, CA 93013 (805)684-0533 Fax (805)566-9474 www.bega-us.com © Copyright BEGA-US 2017

In the interest of product improvement, BEGA reserves the right to make technical changes without notice.

Pole-top with asymmetrical wide-spread distribution 77 910

77 910

8/8/2017

Page 2 of 2

Product Safety Warnings:

CAUTION - RISK OF FIRE. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE

INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND

THE HAZARDS INVOLVED. SUITABLE FOR WET LOCATIONS.

MIN 90°C SUPPLY CONDUCTORS.

ATTENTION - RISQUE D’INCENDIE. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT,

PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES

INHÉRENTS. CONVIENT AUX EMPLACEMENTS MOUILLÉS.

LES FILS D’ALIMENTATION 90°C MIN.